Merge tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.18-rc5 for some
  reported issues and new quirks. They include:

   - dwc3 driver fixes

   - xhci driver fixes

   - typec driver fixes

   - new usb-serial driver ids

   - added new USB devices to existing quirk tables

   - other tiny fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
  usb: phy: generic: Get the vbus supply
  usb: dwc3: gadget: Return proper request status
  usb: dwc3: pci: add support for the Intel Meteor Lake-P
  usb: dwc3: core: Only handle soft-reset in DCTL
  usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
  usb: misc: eud: Fix an error handling path in eud_probe()
  usb: core: Don't hold the device lock while sleeping in do_proc_control()
  usb: dwc3: Try usb-role-switch first in dwc3_drd_init
  usb: dwc3: core: Fix tx/rx threshold settings
  usb: mtu3: fix USB 3.0 dual-role-switch from device to host
  xhci: Enable runtime PM on second Alderlake controller
  usb: dwc3: fix backwards compat with rockchip devices
  dt-bindings: usb: samsung,exynos-usb2: add missing required reg
  usb: misc: fix improper handling of refcount in uss720_probe()
  USB: Fix ehci infinite suspend-resume loop issue in zhaoxin
  usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant
  usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY
  usb: typec: ucsi: Fix role swapping
  usb: typec: ucsi: Fix reuse of completion structure
  usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
  ...

Author: torvalds

Documentation/devicetree/bindings/usb/samsung,exynos-usb2.yaml

@@ -62,6 +62,7 @@ required:
   - interrupts
   - phys
   - phy-names
+  - reg
 
 allOf:
   - if:

drivers/usb/cdns3/cdns3-gadget.c

@@ -2684,6 +2684,7 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
 	struct usb_request *request;
 	struct cdns3_request *priv_req;
 	struct cdns3_trb *trb = NULL;
+	struct cdns3_trb trb_tmp;
 	int ret;
 	int val;
 
@@ -2693,8 +2694,10 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
 	if (request) {
 		priv_req = to_cdns3_request(request);
 		trb = priv_req->trb;
-		if (trb)
+		if (trb) {
+			trb_tmp = *trb;
 			trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
+		}
 	}
 
 	writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
@@ -2709,7 +2712,7 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
 
 	if (request) {
 		if (trb)
-			trb->control = trb->control ^ cpu_to_le32(TRB_CYCLE);
+			*trb = trb_tmp;
 
 		cdns3_rearm_transfer(priv_ep, 1);
 	}

drivers/usb/core/devio.c

@@ -1209,12 +1209,16 @@ static int do_proc_control(struct usb_dev_state *ps,
 
 		usb_unlock_device(dev);
 		i = usbfs_start_wait_urb(urb, tmo, &actlen);
+
+		/* Linger a bit, prior to the next control message. */
+		if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+			msleep(200);
 		usb_lock_device(dev);
 		snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, tbuf, actlen);
 		if (!i && actlen) {
 			if (copy_to_user(ctrl->data, tbuf, actlen)) {
 				ret = -EFAULT;
-				goto recv_fault;
+				goto done;
 			}
 		}
 	} else {
@@ -1231,6 +1235,10 @@ static int do_proc_control(struct usb_dev_state *ps,
 
 		usb_unlock_device(dev);
 		i = usbfs_start_wait_urb(urb, tmo, &actlen);
+
+		/* Linger a bit, prior to the next control message. */
+		if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
+			msleep(200);
 		usb_lock_device(dev);
 		snoop_urb(dev, NULL, pipe, actlen, i, COMPLETE, NULL, 0);
 	}
@@ -1242,10 +1250,6 @@ static int do_proc_control(struct usb_dev_state *ps,
 	}
 	ret = (i < 0 ? i : actlen);
 
- recv_fault:
-	/* Linger a bit, prior to the next control message. */
-	if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG)
-		msleep(200);
  done:
 	kfree(dr);
 	usb_free_urb(urb);

drivers/usb/core/quirks.c

@@ -404,6 +404,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
 			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
 
+	/* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/
+	{ USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* Realtek hub in Dell WD19 (Type-C) */
 	{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
 
@@ -507,6 +510,9 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* DJI CineSSD */
 	{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
 
+	/* VCOM device */
+	{ USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
 	/* INTEL VALUE SSD */
 	{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
 

drivers/usb/dwc3/core.c

@@ -274,7 +274,8 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg |= DWC3_DCTL_CSFTRST;
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	reg &= ~DWC3_DCTL_RUN_STOP;
+	dwc3_gadget_dctl_write_safe(dwc, reg);
 
 	/*
 	 * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit
@@ -1377,10 +1378,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
-	u8			rx_thr_num_pkt_prd;
-	u8			rx_max_burst_prd;
-	u8			tx_thr_num_pkt_prd;
-	u8			tx_max_burst_prd;
+	u8			rx_thr_num_pkt_prd = 0;
+	u8			rx_max_burst_prd = 0;
+	u8			tx_thr_num_pkt_prd = 0;
+	u8			tx_max_burst_prd = 0;
 	u8			tx_fifo_resize_max_num;
 	const char		*usb_psy_name;
 	int			ret;
@@ -1690,21 +1691,44 @@ static int dwc3_probe(struct platform_device *pdev)
 		/*
 		 * Clocks are optional, but new DT platforms should support all
 		 * clocks as required by the DT-binding.
+		 * Some devices have different clock names in legacy device trees,
+		 * check for them to retain backwards compatibility.
 		 */
 		dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
 		if (IS_ERR(dwc->bus_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
 					     "could not get bus clock\n");
 
+		if (dwc->bus_clk == NULL) {
+			dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
+			if (IS_ERR(dwc->bus_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+						     "could not get bus clock\n");
+		}
+
 		dwc->ref_clk = devm_clk_get_optional(dev, "ref");
 		if (IS_ERR(dwc->ref_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
 					     "could not get ref clock\n");
 
+		if (dwc->ref_clk == NULL) {
+			dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
+			if (IS_ERR(dwc->ref_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+						     "could not get ref clock\n");
+		}
+
 		dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
 		if (IS_ERR(dwc->susp_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
 					     "could not get suspend clock\n");
+
+		if (dwc->susp_clk == NULL) {
+			dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
+			if (IS_ERR(dwc->susp_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+						     "could not get suspend clock\n");
+		}
 	}
 
 	ret = reset_control_deassert(dwc->reset);

drivers/usb/dwc3/drd.c

@@ -584,16 +584,15 @@ int dwc3_drd_init(struct dwc3 *dwc)
 {
 	int ret, irq;
 
+	if (ROLE_SWITCH &&
+	    device_property_read_bool(dwc->dev, "usb-role-switch"))
+		return dwc3_setup_role_switch(dwc);
+
 	dwc->edev = dwc3_get_extcon(dwc);
 	if (IS_ERR(dwc->edev))
 		return PTR_ERR(dwc->edev);
 
-	if (ROLE_SWITCH &&
-	    device_property_read_bool(dwc->dev, "usb-role-switch")) {
-		ret = dwc3_setup_role_switch(dwc);
-		if (ret < 0)
-			return ret;
-	} else if (dwc->edev) {
+	if (dwc->edev) {
 		dwc->edev_nb.notifier_call = dwc3_drd_notifier;
 		ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
 					       &dwc->edev_nb);

drivers/usb/dwc3/dwc3-pci.c

@@ -45,6 +45,8 @@
 #define PCI_DEVICE_ID_INTEL_ADLM		0x54ee
 #define PCI_DEVICE_ID_INTEL_ADLS		0x7ae1
 #define PCI_DEVICE_ID_INTEL_RPLS		0x7a61
+#define PCI_DEVICE_ID_INTEL_MTLP		0x7ec1
+#define PCI_DEVICE_ID_INTEL_MTL			0x7e7e
 #define PCI_DEVICE_ID_INTEL_TGL			0x9a15
 #define PCI_DEVICE_ID_AMD_MR			0x163a
 
@@ -456,6 +458,12 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPLS),
 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
 
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTLP),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
+	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MTL),
+	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
+
 	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL),
 	  (kernel_ulong_t) &dwc3_pci_intel_swnode, },
 

drivers/usb/dwc3/gadget.c

@@ -3274,6 +3274,7 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
 		const struct dwc3_event_depevt *event,
 		struct dwc3_request *req, int status)
 {
+	int request_status;
 	int ret;
 
 	if (req->request.num_mapped_sgs)
@@ -3294,7 +3295,35 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
 		req->needs_extra_trb = false;
 	}
 
-	dwc3_gadget_giveback(dep, req, status);
+	/*
+	 * The event status only reflects the status of the TRB with IOC set.
+	 * For the requests that don't set interrupt on completion, the driver
+	 * needs to check and return the status of the completed TRBs associated
+	 * with the request. Use the status of the last TRB of the request.
+	 */
+	if (req->request.no_interrupt) {
+		struct dwc3_trb *trb;
+
+		trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue);
+		switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) {
+		case DWC3_TRBSTS_MISSED_ISOC:
+			/* Isoc endpoint only */
+			request_status = -EXDEV;
+			break;
+		case DWC3_TRB_STS_XFER_IN_PROG:
+			/* Applicable when End Transfer with ForceRM=0 */
+		case DWC3_TRBSTS_SETUP_PENDING:
+			/* Control endpoint only */
+		case DWC3_TRBSTS_OK:
+		default:
+			request_status = 0;
+			break;
+		}
+	} else {
+		request_status = status;
+	}
+
+	dwc3_gadget_giveback(dep, req, request_status);
 
 out:
 	return ret;

drivers/usb/gadget/configfs.c

@@ -1438,6 +1438,8 @@ static void configfs_composite_unbind(struct usb_gadget *gadget)
 	usb_ep_autoconfig_reset(cdev->gadget);
 	spin_lock_irqsave(&gi->spinlock, flags);
 	cdev->gadget = NULL;
+	cdev->deactivations = 0;
+	gadget->deactivated = false;
 	set_gadget_data(gadget, NULL);
 	spin_unlock_irqrestore(&gi->spinlock, flags);
 }

drivers/usb/gadget/function/uvc_queue.c

@@ -264,6 +264,8 @@ void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect)
 		buf->state = UVC_BUF_STATE_ERROR;
 		vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
 	}
+	queue->buf_used = 0;
+
 	/* This must be protected by the irqlock spinlock to avoid race
 	 * conditions between uvc_queue_buffer and the disconnection event that
 	 * could result in an interruptible wait in uvc_dequeue_buffer. Do not