Merge tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are a number of small USB and Thunderbolt driver fixes and new
  device id changes for 6.2-rc5. Included in here are:

   - thunderbolt bugfixes for reported problems

   - new usb-serial driver ids added

   - onboard_hub usb driver fixes for much-reported problems

   - xhci bugfixes

   - typec bugfixes

   - ehci-fsl driver module alias fix

   - iowarrior header size fix

   - usb gadget driver fixes

  All of these, except for the iowarrior fix, have been in linux-next
  with no reported issues. The iowarrior fix passed the 0-day testing
  and is a one digit change based on a reported problem in the driver
  (which was written to a spec, not the real device that is now
  available)"

* tag 'usb-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (40 commits)
  USB: misc: iowarrior: fix up header size for USB_DEVICE_ID_CODEMERCS_IOW100
  usb: host: ehci-fsl: Fix module alias
  usb: dwc3: fix extcon dependency
  usb: core: hub: disable autosuspend for TI TUSB8041
  USB: fix misleading usb_set_intfdata() kernel doc
  usb: gadget: f_ncm: fix potential NULL ptr deref in ncm_bitrate()
  USB: gadget: Add ID numbers to configfs-gadget driver names
  usb: typec: tcpm: Fix altmode re-registration causes sysfs create fail
  usb: gadget: g_webcam: Send color matching descriptor per frame
  usb: typec: altmodes/displayport: Use proper macro for pin assignment check
  usb: typec: altmodes/displayport: Fix pin assignment calculation
  usb: typec: altmodes/displayport: Add pin assignment helper
  usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
  usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
  usb: misc: onboard_hub: Move 'attach' work to the driver
  usb: misc: onboard_hub: Invert driver registration order
  usb: ucsi: Ensure connector delayed work items are flushed
  usb: musb: fix error return code in omap2430_probe()
  usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)
  xhci: Detect lpm incapable xHC USB3 roothub ports from ACPI tables
  ...

Author: torvalds

drivers/thunderbolt/retimer.c

@@ -427,21 +427,14 @@ int tb_retimer_scan(struct tb_port *port, bool add)
 {
 	u32 status[TB_MAX_RETIMER_INDEX + 1] = {};
 	int ret, i, last_idx = 0;
-	struct usb4_port *usb4;
-
-	usb4 = port->usb4;
-	if (!usb4)
-		return 0;
-
-	pm_runtime_get_sync(&usb4->dev);
 
 	/*
 	 * Send broadcast RT to make sure retimer indices facing this
 	 * port are set.
 	 */
 	ret = usb4_port_enumerate_retimers(port);
 	if (ret)
-		goto out;
+		return ret;
 
 	/*
 	 * Enable sideband channel for each retimer. We can do this
@@ -471,12 +464,11 @@ int tb_retimer_scan(struct tb_port *port, bool add)
 			break;
 	}
 
-	if (!last_idx) {
-		ret = 0;
-		goto out;
-	}
+	if (!last_idx)
+		return 0;
 
 	/* Add on-board retimers if they do not exist already */
+	ret = 0;
 	for (i = 1; i <= last_idx; i++) {
 		struct tb_retimer *rt;
 
@@ -490,10 +482,6 @@ int tb_retimer_scan(struct tb_port *port, bool add)
 		}
 	}
 
-out:
-	pm_runtime_mark_last_busy(&usb4->dev);
-	pm_runtime_put_autosuspend(&usb4->dev);
-
 	return ret;
 }
 

drivers/thunderbolt/tb.c

@@ -628,11 +628,15 @@ static void tb_scan_port(struct tb_port *port)
 			 * Downstream switch is reachable through two ports.
 			 * Only scan on the primary port (link_nr == 0).
 			 */
+
+	if (port->usb4)
+		pm_runtime_get_sync(&port->usb4->dev);
+
 	if (tb_wait_for_port(port, false) <= 0)
-		return;
+		goto out_rpm_put;
 	if (port->remote) {
 		tb_port_dbg(port, "port already has a remote\n");
-		return;
+		goto out_rpm_put;
 	}
 
 	tb_retimer_scan(port, true);
@@ -647,12 +651,12 @@ static void tb_scan_port(struct tb_port *port)
 		 */
 		if (PTR_ERR(sw) == -EIO || PTR_ERR(sw) == -EADDRNOTAVAIL)
 			tb_scan_xdomain(port);
-		return;
+		goto out_rpm_put;
 	}
 
 	if (tb_switch_configure(sw)) {
 		tb_switch_put(sw);
-		return;
+		goto out_rpm_put;
 	}
 
 	/*
@@ -681,7 +685,7 @@ static void tb_scan_port(struct tb_port *port)
 
 	if (tb_switch_add(sw)) {
 		tb_switch_put(sw);
-		return;
+		goto out_rpm_put;
 	}
 
 	/* Link the switches using both links if available */
@@ -733,6 +737,12 @@ static void tb_scan_port(struct tb_port *port)
 
 	tb_add_dp_resources(sw);
 	tb_scan_switch(sw);
+
+out_rpm_put:
+	if (port->usb4) {
+		pm_runtime_mark_last_busy(&port->usb4->dev);
+		pm_runtime_put_autosuspend(&port->usb4->dev);
+	}
 }
 
 static void tb_deactivate_and_free_tunnel(struct tb_tunnel *tunnel)

drivers/thunderbolt/tunnel.c

@@ -1275,7 +1275,7 @@ static void tb_usb3_reclaim_available_bandwidth(struct tb_tunnel *tunnel,
 		return;
 	} else if (!ret) {
 		/* Use maximum link rate if the link valid is not set */
-		ret = usb4_usb3_port_max_link_rate(tunnel->src_port);
+		ret = tb_usb3_max_link_rate(tunnel->dst_port, tunnel->src_port);
 		if (ret < 0) {
 			tb_tunnel_warn(tunnel, "failed to read maximum link rate\n");
 			return;

drivers/thunderbolt/xdomain.c

@@ -1419,12 +1419,19 @@ static int tb_xdomain_get_properties(struct tb_xdomain *xd)
 	 * registered, we notify the userspace that it has changed.
 	 */
 	if (!update) {
-		struct tb_port *port;
+		/*
+		 * Now disable lane 1 if bonding was not enabled. Do
+		 * this only if bonding was possible at the beginning
+		 * (that is we are the connection manager and there are
+		 * two lanes).
+		 */
+		if (xd->bonding_possible) {
+			struct tb_port *port;
 
-		/* Now disable lane 1 if bonding was not enabled */
-		port = tb_port_at(xd->route, tb_xdomain_parent(xd));
-		if (!port->bonded)
-			tb_port_disable(port->dual_link_port);
+			port = tb_port_at(xd->route, tb_xdomain_parent(xd));
+			if (!port->bonded)
+				tb_port_disable(port->dual_link_port);
+		}
 
 		if (device_add(&xd->dev)) {
 			dev_err(&xd->dev, "failed to add XDomain device\n");

drivers/usb/cdns3/cdns3-gadget.c

@@ -2614,6 +2614,7 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
 	u8 req_on_hw_ring = 0;
 	unsigned long flags;
 	int ret = 0;
+	int val;
 
 	if (!ep || !request || !ep->desc)
 		return -EINVAL;
@@ -2649,6 +2650,13 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
 
 	/* Update ring only if removed request is on pending_req_list list */
 	if (req_on_hw_ring && link_trb) {
+		/* Stop DMA */
+		writel(EP_CMD_DFLUSH, &priv_dev->regs->ep_cmd);
+
+		/* wait for DFLUSH cleared */
+		readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
+					  !(val & EP_CMD_DFLUSH), 1, 1000);
+
 		link_trb->buffer = cpu_to_le32(TRB_BUFFER(priv_ep->trb_pool_dma +
 			((priv_req->end_trb + 1) * TRB_SIZE)));
 		link_trb->control = cpu_to_le32((le32_to_cpu(link_trb->control) & TRB_CYCLE) |
@@ -2660,6 +2668,10 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
 
 	cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET);
 
+	req = cdns3_next_request(&priv_ep->pending_req_list);
+	if (req)
+		cdns3_rearm_transfer(priv_ep, 1);
+
 not_found:
 	spin_unlock_irqrestore(&priv_dev->lock, flags);
 	return ret;

drivers/usb/chipidea/core.c

@@ -1294,12 +1294,12 @@ static void ci_extcon_wakeup_int(struct ci_hdrc *ci)
 	cable_id = &ci->platdata->id_extcon;
 	cable_vbus = &ci->platdata->vbus_extcon;
 
-	if ((!IS_ERR(cable_id->edev) || !IS_ERR(ci->role_switch))
+	if ((!IS_ERR(cable_id->edev) || ci->role_switch)
 		&& ci->is_otg &&
 		(otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS))
 		ci_irq(ci);
 
-	if ((!IS_ERR(cable_vbus->edev) || !IS_ERR(ci->role_switch))
+	if ((!IS_ERR(cable_vbus->edev) || ci->role_switch)
 		&& ci->is_otg &&
 		(otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS))
 		ci_irq(ci);

drivers/usb/core/hub.c

@@ -44,6 +44,9 @@
 #define USB_PRODUCT_USB5534B			0x5534
 #define USB_VENDOR_CYPRESS			0x04b4
 #define USB_PRODUCT_CY7C65632			0x6570
+#define USB_VENDOR_TEXAS_INSTRUMENTS		0x0451
+#define USB_PRODUCT_TUSB8041_USB3		0x8140
+#define USB_PRODUCT_TUSB8041_USB2		0x8142
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
 #define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
 
@@ -5854,6 +5857,16 @@ static const struct usb_device_id hub_id_table[] = {
       .idVendor = USB_VENDOR_GENESYS_LOGIC,
       .bInterfaceClass = USB_CLASS_HUB,
       .driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_PRODUCT,
+      .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
+      .idProduct = USB_PRODUCT_TUSB8041_USB2,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+			| USB_DEVICE_ID_MATCH_PRODUCT,
+      .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
+      .idProduct = USB_PRODUCT_TUSB8041_USB3,
+      .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
       .bDeviceClass = USB_CLASS_HUB},
     { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,

drivers/usb/core/usb-acpi.c

@@ -37,6 +37,71 @@ bool usb_acpi_power_manageable(struct usb_device *hdev, int index)
 }
 EXPORT_SYMBOL_GPL(usb_acpi_power_manageable);
 
+#define UUID_USB_CONTROLLER_DSM "ce2ee385-00e6-48cb-9f05-2edb927c4899"
+#define USB_DSM_DISABLE_U1_U2_FOR_PORT	5
+
+/**
+ * usb_acpi_port_lpm_incapable - check if lpm should be disabled for a port.
+ * @hdev: USB device belonging to the usb hub
+ * @index: zero based port index
+ *
+ * Some USB3 ports may not support USB3 link power management U1/U2 states
+ * due to different retimer setup. ACPI provides _DSM method which returns 0x01
+ * if U1 and U2 states should be disabled. Evaluate _DSM with:
+ * Arg0: UUID = ce2ee385-00e6-48cb-9f05-2edb927c4899
+ * Arg1: Revision ID = 0
+ * Arg2: Function Index = 5
+ * Arg3: (empty)
+ *
+ * Return 1 if USB3 port is LPM incapable, negative on error, otherwise 0
+ */
+
+int usb_acpi_port_lpm_incapable(struct usb_device *hdev, int index)
+{
+	union acpi_object *obj;
+	acpi_handle port_handle;
+	int port1 = index + 1;
+	guid_t guid;
+	int ret;
+
+	ret = guid_parse(UUID_USB_CONTROLLER_DSM, &guid);
+	if (ret)
+		return ret;
+
+	port_handle = usb_get_hub_port_acpi_handle(hdev, port1);
+	if (!port_handle) {
+		dev_dbg(&hdev->dev, "port-%d no acpi handle\n", port1);
+		return -ENODEV;
+	}
+
+	if (!acpi_check_dsm(port_handle, &guid, 0,
+			    BIT(USB_DSM_DISABLE_U1_U2_FOR_PORT))) {
+		dev_dbg(&hdev->dev, "port-%d no _DSM function %d\n",
+			port1, USB_DSM_DISABLE_U1_U2_FOR_PORT);
+		return -ENODEV;
+	}
+
+	obj = acpi_evaluate_dsm(port_handle, &guid, 0,
+				USB_DSM_DISABLE_U1_U2_FOR_PORT, NULL);
+
+	if (!obj)
+		return -ENODEV;
+
+	if (obj->type != ACPI_TYPE_INTEGER) {
+		dev_dbg(&hdev->dev, "evaluate port-%d _DSM failed\n", port1);
+		ACPI_FREE(obj);
+		return -EINVAL;
+	}
+
+	if (obj->integer.value == 0x01)
+		ret = 1;
+
+	ACPI_FREE(obj);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_acpi_port_lpm_incapable);
+
 /**
  * usb_acpi_set_power_state - control usb port's power via acpi power
  * resource

drivers/usb/dwc3/Kconfig

@@ -3,6 +3,7 @@
 config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
 	depends on (USB || USB_GADGET) && HAS_DMA
+	depends on (EXTCON || EXTCON=n)
 	select USB_XHCI_PLATFORM if USB_XHCI_HCD
 	select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE
 	help
@@ -44,7 +45,6 @@ config USB_DWC3_GADGET
 config USB_DWC3_DUAL_ROLE
 	bool "Dual Role mode"
 	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
-	depends on (EXTCON=y || EXTCON=USB_DWC3)
 	help
 	  This is the default mode of working of DWC3 controller where
 	  both host and gadget features are enabled.

drivers/usb/gadget/configfs.c

@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item)
 	WARN_ON(!list_empty(&gi->string_list));
 	WARN_ON(!list_empty(&gi->available_func));
 	kfree(gi->composite.gadget_driver.function);
+	kfree(gi->composite.gadget_driver.driver.name);
 	kfree(gi);
 }
 
@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = {
 	.max_speed	= USB_SPEED_SUPER_PLUS,
 	.driver = {
 		.owner          = THIS_MODULE,
-		.name		= "configfs-gadget",
 	},
 	.match_existing_only = 1,
 };
@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make(
 
 	gi->composite.gadget_driver = configfs_driver_template;
 
+	gi->composite.gadget_driver.driver.name = kasprintf(GFP_KERNEL,
+							    "configfs-gadget.%s", name);
+	if (!gi->composite.gadget_driver.driver.name)
+		goto err;
+
 	gi->composite.gadget_driver.function = kstrdup(name, GFP_KERNEL);
 	gi->composite.name = gi->composite.gadget_driver.function;
 
 	if (!gi->composite.gadget_driver.function)
-		goto err;
+		goto out_free_driver_name;
 
 	return &gi->group;
+
+out_free_driver_name:
+	kfree(gi->composite.gadget_driver.driver.name);
 err:
 	kfree(gi);
 	return ERR_PTR(-ENOMEM);