Merge tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "No core changes this time. Just new driver code and improvements!

  New drivers:

   - New driver for the Broadcom BCM4908 SoC.

   - New subdriver for Tesla FSD (Full Self Driving) SoC, a derivative
     of the Samsung Exynos pin control driver.

   - New driver for the Amlogic Meson S4 SoC.

   - New driver for the Sunplus SP7021 SoC.

   - New driver for the Microsemi Ocelot family ServalT SoC.

   - New subdriver for Intel Alder Lake-M SoC.

   - New subdriver for Intel Ice Lake-N SoC, including PCH support.

   - New subdriver for Renesas R8A779F0 SoC.

   - New subdriver for Mediatek MT8186 SoC.

   - New subdriver for NXP Freescale i.MX93 SoC.

   - New driver for Nuvoton WPCM450 SoC.

   - New driver for Qualcomm SC8280XP SoC.

  Improvements:

   - Wakeup support on Samsung Exynos850 and ExynosAutov9.

   - Serious and voluminous maintenance cleanup and refactoring in the
     Renesas drivers. Mainly sharing similar data between the different
     SoC subdrivers.

   - Qualcomm SM8450 EGPIO support.

   - Drive strength support on the Mediatek MT8195.

   - Add some missing groups and functions to the Ralink RT2880"

* tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (188 commits)
  pinctrl: mediatek: common-v1: fix semicolon.cocci warnings
  pinctrl: nuvoton: wpcm450: Fix build error without OF
  pinctrl: qcom-pmic-gpio: Add support for pm8450
  dt-bindings: pinctrl: aspeed: Update gfx node in example
  dt-bindings: pinctrl: rt2880: add missing pin groups and functions
  pinctrl: ingenic: Fix regmap on X series SoCs
  pinctrl: nuvoton: Fix return value check in wpcm450_gpio_register()
  pinctrl: nuvoton: wpcm450: off by one in wpcm450_gpio_register()
  pinctrl: nuvoton: wpcm450: select GENERIC_PINCTRL_GROUPS
  pinctrl: nuvoton: Fix sparse warning
  pinctrl: mediatek: mt8186: Account for probe refactoring
  pinctrl: mediatek: common-v1: Commonize spec_ies_smt_set callback
  pinctrl: mediatek: common-v1: Commonize spec_pupd callback
  pinctrl: mediatek: common-v1: Use common probe function
  pinctrl: mediatek: common-v1: Add common probe function
  pinctrl: mediatek: paris: Unify probe function by using OF match data
  pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe
  pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe
  pinctrl: berlin: fix error return code of berlin_pinctrl_build_state()
  pinctrl: qcom: Introduce sc8280xp TLMM driver
  ...

Author: torvalds

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml

@@ -75,6 +75,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/clock/aspeed-clock.h>
     apb {
         compatible = "simple-bus";
         #address-cells = <1>;
@@ -84,6 +85,8 @@ examples:
         syscon: scu@1e6e2000 {
             compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
             reg = <0x1e6e2000 0x1a8>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
 
             pinctrl: pinctrl {
                 compatible = "aspeed,ast2500-pinctrl";
@@ -104,6 +107,12 @@ examples:
         gfx: display@1e6e6000 {
             compatible = "aspeed,ast2500-gfx", "syscon";
             reg = <0x1e6e6000 0x1000>;
+            reg-io-width = <4>;
+            clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+            resets = <&syscon ASPEED_RESET_CRT1>;
+            interrupts = <0x19>;
+            syscon = <&syscon>;
+            memory-region = <&gfx_memory>;
         };
     };
 
@@ -130,3 +139,10 @@ examples:
             };
         };
     };
+
+    gfx_memory: framebuffer {
+        size = <0x01000000>;
+        alignment = <0x01000000>;
+        compatible = "shared-dma-pool";
+        reusable;
+    };

Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt

@@ -85,7 +85,7 @@ Optional Properties (for I2C pins):
 - function:			String. Specifies the pin mux selection. Values
 				must be one of: "alt1", "alt2", "alt3", "alt4"
 - bias-pull-up:			Integer. Pull up strength in Ohm. There are 3
-				pull-up resisitors (1.2k, 1.8k, 2.7k) available
+				pull-up resistors (1.2k, 1.8k, 2.7k) available
 				in parallel for I2C pins, so the valid values
 				are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm.
 - bias-disable:			No arguments. Disable pin bias.

Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml

@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4908 pin controller
+
+maintainers:
+  - Rafał Miłecki <[email protected]>
+
+description:
+  Binding for pin controller present on BCM4908 family SoCs.
+
+properties:
+  compatible:
+    const: brcm,bcm4908-pinctrl
+
+  reg:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8,
+                led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16,
+                led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24,
+                led_25, led_26, led_27, led_28, led_29, led_30, led_31,
+                hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr,
+                usb1_pwr ]
+
+      groups:
+        minItems: 1
+        maxItems: 2
+        items:
+          enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a,
+                  led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a,
+                  led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b,
+                  led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b,
+                  led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a,
+                  led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a,
+                  led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a,
+                  led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a,
+                  led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a,
+                  led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp,
+                  nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp,
+                  usb1_pwr_grp ]
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@ff800560 {
+        compatible = "brcm,bcm4908-pinctrl";
+        reg = <0xff800560 0x10>;
+
+        led_0-a-pins {
+            function = "led_0";
+            groups = "led_0_grp_a";
+        };
+    };

Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml

@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale IMX93 IOMUX Controller
+
+maintainers:
+  - Peng Fan <[email protected]>
+
+description:
+  Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+  for common binding part and usage.
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+properties:
+  compatible:
+    const: fsl,imx93-iomuxc
+
+  reg:
+    maxItems: 1
+
+# Client device subnode's properties
+patternProperties:
+  'grp$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+
+    properties:
+      fsl,pins:
+        description:
+          each entry consists of 6 integers and represents the mux and config
+          setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
+          mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
+          be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
+          integer CONFIG is the pad setting value like pull-up on this pin. Please
+          refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        items:
+          items:
+            - description: |
+                "mux_reg" indicates the offset of mux register.
+            - description: |
+                "conf_reg" indicates the offset of pad configuration register.
+            - description: |
+                "input_reg" indicates the offset of select input register.
+            - description: |
+                "mux_val" indicates the mux value to be applied.
+            - description: |
+                "input_val" indicates the select input value to be applied.
+            - description: |
+                "pad_setting" indicates the pad configuration value to be applied.
+
+
+    required:
+      - fsl,pins
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  # Pinmux controller node
+  - |
+    iomuxc: pinctrl@443c0000 {
+        compatible = "fsl,imx93-iomuxc";
+        reg = <0x30330000 0x10000>;
+
+        pinctrl_uart3: uart3grp {
+            fsl,pins =
+                <0x48 0x1f8 0x41c 0x1 0x0	0x49>,
+                <0x4c 0x1fc 0x418 0x1 0x0	0x49>;
+        };
+    };
+
+...

Documentation/devicetree/bindings/pinctrl/meson,pinctrl.txt

@@ -16,6 +16,7 @@ Required properties for the root node:
 		      "amlogic,meson-g12a-periphs-pinctrl"
 		      "amlogic,meson-g12a-aobus-pinctrl"
 		      "amlogic,meson-a1-periphs-pinctrl"
+		      "amlogic,meson-s4-periphs-pinctrl"
  - reg: address and size of registers controlling irq functionality
 
 === GPIO sub-nodes ===

Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml

@@ -145,7 +145,7 @@ examples:
       clocks = <&sys_clk>;
       pinctrl-0 = <&sgpio2_pins>;
       pinctrl-names = "default";
-      reg = <0x1101059c 0x100>;
+      reg = <0x1101059c 0x118>;
       microchip,sgpio-port-ranges = <0 0>, <16 18>, <28 31>;
       bus-frequency = <25000000>;
       sgpio_in2: gpio@0 {

Documentation/devicetree/bindings/pinctrl/mscc,ocelot-pinctrl.txt

@@ -4,8 +4,8 @@ Microsemi Ocelot pin controller Device Tree Bindings
 Required properties:
  - compatible		: Should be "mscc,ocelot-pinctrl",
 			  "mscc,jaguar2-pinctrl", "microchip,sparx5-pinctrl",
-			  "mscc,luton-pinctrl", "mscc,serval-pinctrl" or
-			  "microchip,lan966x-pinctrl"
+			  "mscc,luton-pinctrl", "mscc,serval-pinctrl",
+			  "microchip,lan966x-pinctrl" or "mscc,servalt-pinctrl"
  - reg			: Address and length of the register set for the device
  - gpio-controller	: Indicates this device is a GPIO controller
  - #gpio-cells		: Must be 2.

Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml

@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton WPCM450 pin control and GPIO
+
+maintainers:
+  - Jonathan Neuschäfer <[email protected]>
+
+properties:
+  compatible:
+    const: nuvoton,wpcm450-pinctrl
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  # There are three kinds of subnodes:
+  # 1. a GPIO controller node for each GPIO bank
+  # 2. a pinmux node configures pin muxing for a group of pins (e.g. rmii2)
+  # 3. a pinconf node configures properties of a single pin
+
+  "^gpio@[0-7]$":
+    type: object
+
+    description:
+      Eight GPIO banks (gpio@0 to gpio@7), that each contain between 14 and 18
+      GPIOs. Some GPIOs support interrupts.
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 7
+
+      gpio-controller: true
+
+      "#gpio-cells":
+        const: 2
+
+      interrupt-controller: true
+
+      "#interrupt-cells":
+        const: 2
+
+      interrupts:
+        maxItems: 3
+        description:
+          The interrupts associated with this GPIO bank
+
+    required:
+      - reg
+      - gpio-controller
+      - '#gpio-cells'
+
+  "^mux-":
+    $ref: pinmux-node.yaml#
+
+    properties:
+      groups:
+        description:
+          One or more groups of pins to mux to a certain function
+        items:
+          enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                  hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo,
+                  clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0,
+                  fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11,
+                  fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
+                  pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ]
+      function:
+        description:
+          The function that a group of pins is muxed to
+        enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
+                hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0,
+                dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc,
+                gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4,
+                fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15,
+                pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
+                hg2, hg3, hg4, hg5, hg6, hg7, gpio ]
+
+    dependencies:
+      groups: [ function ]
+      function: [ groups ]
+
+    additionalProperties: false
+
+  "^cfg-":
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          A list of pins to configure in certain ways, such as enabling
+          debouncing
+        items:
+          pattern: "^gpio1?[0-9]{1,2}$"
+
+      input-debounce: true
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    pinctrl: pinctrl@b8003000 {
+      compatible = "nuvoton,wpcm450-pinctrl";
+      reg = <0xb8003000 0x1000>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      gpio0: gpio@0 {
+        reg = <0>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
+                     <3 IRQ_TYPE_LEVEL_HIGH>,
+                     <4 IRQ_TYPE_LEVEL_HIGH>;
+      };
+
+      mux-rmii2 {
+        groups = "rmii2";
+        function = "rmii2";
+      };
+
+      pinmux_uid: mux-uid {
+        groups = "gspi", "sspi";
+        function = "gpio";
+      };
+
+      pinctrl_uid: cfg-uid {
+        pins = "gpio14";
+        input-debounce = <1>;
+      };
+    };
+
+    gpio-keys {
+      compatible = "gpio-keys";
+      pinctrl-names = "default";
+      pinctrl-0 = <&pinctrl_uid>, <&pinmux_uid>;
+
+      uid {
+        label = "UID";
+        linux,code = <102>;
+        gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+      };
+    };