Fix styling

Author: maxvp

src/content/docs/cloudflare-one/policies/gateway/egress-policies/index.mdx

@@ -254,18 +254,18 @@ Additionally, to use these selectors to filter traffic onboarded with WARP, you
 2. In your WARP [device profile](/cloudflare-one/connections/connect-devices/warp/configure-warp/device-profiles/), configure your [Split Tunnel](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/) depending on the mode:
 
    <Tabs> <TabItem label="Exclude IPs and domains">
-1. [Remove the route](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#remove-a-route) to the IP address `100.64.0.0/10` from your Split Tunnel exclude list.
-2. [Add routes](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#add-a-route) to exclude the following IP addresses:
-   - `100.64.0.0/12`
-   - `100.81.0.0/16`
-   - `100.82.0.0/15`
-   - `100.84.0.0/14`
-   - `100.88.0.0/13`
-   - `100.96.0.0/11`
+   1. [Remove the route](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#remove-a-route) to the IP address `100.64.0.0/10` from your Split Tunnel exclude list.
+   2. [Add routes](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#add-a-route) to exclude the following IP addresses:
+      - `100.64.0.0/12`
+      - `100.81.0.0/16`
+      - `100.82.0.0/15`
+      - `100.84.0.0/14`
+      - `100.88.0.0/13`
+      - `100.96.0.0/11`
 
    </TabItem> <TabItem label="Include IPs and domains">
-1. Add the required [Zero Trust domains](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#cloudflare-zero-trust-domains) or [IP addresses](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#cloudflare-zero-trust-ip-addresses) to your Split Tunnel include list.
-2. [Add a route](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#add-a-route) to include the IP address `100.80.0.0/16`.
+   1. Add the required [Zero Trust domains](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#cloudflare-zero-trust-domains) or [IP addresses](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#cloudflare-zero-trust-ip-addresses) to your Split Tunnel include list.
+   2. [Add a route](/cloudflare-one/connections/connect-devices/warp/configure-warp/route-traffic/split-tunnels/#add-a-route) to include the IP address `100.80.0.0/16`.
 
    </TabItem> </Tabs>