Update src/content/partials/cloudflare-one/tunnel/warp-connector-install.mdx

Co-authored-by: Jun Lee <[email protected]>

Author: ranbel

src/content/partials/cloudflare-one/tunnel/warp-connector-install.mdx

@@ -12,7 +12,7 @@ To install WARP Connector on a host machine:
 4. You will be prompted to turn on **Warp to Warp** and [**Override local interface IP**](/cloudflare-one/connections/connect-devices/warp/configure-warp/warp-settings/#override-local-interface-ip) if they are currently turned off. These settings allow Cloudflare to assign a unique <GlossaryTooltip term="CGNAT IP">CGNAT IP</GlossaryTooltip> to each WARP device and route traffic between them.
 5. Give the tunnel any name (for example, `Subnet-10.0.0.0/24`) and select **Create tunnel**.
 7. Select the operating system of your host machine.
-8. On your host machine, open a terminal window and run the commands shown in the Zero Trust dashboard. Those commands will install the WARP Connector, enable IP forwarding on the host, and connect WARP Connector to your Zero Trust organization.
+7. On your host machine, open a terminal window and run the commands shown in the Zero Trust dashboard. Those commands will install the WARP Connector, enable IP forwarding on the host, and connect WARP Connector to your Zero Trust organization.
 
     :::note[Remote SSH connections]