diff --git a/src/content/partials/magic-wan/connector/configure-connectors.mdx b/src/content/partials/magic-wan/connector/configure-connectors.mdx
index 09b34092a4b395b..6f064dfd60b1b00 100644
--- a/src/content/partials/magic-wan/connector/configure-connectors.mdx
+++ b/src/content/partials/magic-wan/connector/configure-connectors.mdx
@@ -405,7 +405,7 @@ After finishing your Connector configuration, you need to add it to a site. <Ren
 { props.magicWord === "hardware" && (
   <>
 		<p>When the Connector is first activated, you need to have Internet connection. If you chose to set up your Connector with DHCP you will need to have one of the Connector ports connected to the Internet through a device that supports DHCP. This is required so that the Connector can reach the Cloudflare global network and download the required configurations that you <a href="#1-add-a-connector-on-ramp">set up</a>.</p>
-		<p> If you set up your Connector with a static IP through the bootstrap method, you do not need a DHCP port. Refer to <a href="#dhcp-vs-static-ip-connections"> DHCP vs static IP connections</a> for more information.</p>
+		<p> If you set up your Connector with a static IP through the bootstrap method, you do not need a DHCP port. Refer to <a href="#decide-on-dhcp-vs-static-ip-connections"> DHCP vs static IP connections</a> for more information.</p>
 
 		<Aside type="caution">Remember that if you chose the DHCP method you have to connect Magic WAN Connector through a route that supports DHCP for its first connection to the Internet. Otherwise, the Connector will not work.</Aside>
   </>