diff --git a/src/content/docs/magic-transit/how-to/configure-static-routes.mdx b/src/content/docs/magic-transit/how-to/configure-static-routes.mdx
index e96fe837bdcb2c..71e6d6ddc6df81 100644
--- a/src/content/docs/magic-transit/how-to/configure-static-routes.mdx
+++ b/src/content/docs/magic-transit/how-to/configure-static-routes.mdx
@@ -20,7 +20,6 @@ import { Render } from "~/components"
 		BGPpath: "/magic-transit/how-to/bgp-peering/",
 		anycastURL: "/magic-transit/reference/tunnels/",
 		trafficSteering: "/magic-transit/reference/traffic-steering/",
-		magicWANecmp: " ",
 		createPath: "Magic Transit > Configuration",
 		tunnelEndpoints: "/magic-transit/how-to/configure-tunnels/"
 	}}
diff --git a/src/content/docs/magic-wan/configuration/connector/configure-hardware-connector/index.mdx b/src/content/docs/magic-wan/configuration/connector/configure-hardware-connector/index.mdx
index d42c7aa88c5f12..223631f024d49a 100644
--- a/src/content/docs/magic-wan/configuration/connector/configure-hardware-connector/index.mdx
+++ b/src/content/docs/magic-wan/configuration/connector/configure-hardware-connector/index.mdx
@@ -11,7 +11,6 @@ import { Render } from "~/components";
 <Render file="connector/configure-connectors" params={{
 	magicWord: "hardware",
 	productName: "Magic WAN Connector",
-	productNameType: "Magic WAN Connector",
 	wan: "refers to the physical Magic WAN Connector Ethernet port that you are using for your WAN. The ports are labeled `GE1`, `GE2`, `GE3`, `GE4`, `GE5`, and `GE6`. Choose the number corresponding to the port that you are using in Connector. <br/> If you need a throughput higher than 1 Gbps, you can use one of the SFP+ ports. Refer to [SFP+ port information](/magic-wan/configuration/connector/configure-hardware-connector/sfp-port-information/) for more information on the hardware supported.",
 	lan: "refers to the physical Magic WAN Connector Ethernet port that you are using for your LAN. The ports are labeled `GE1`, `GE2`, `GE3`, `GE4`, `GE5`, and `GE6`. Choose a number corresponding to the port that you are using in Connector. <br/> If you need a throughput higher than 1 Gbps, you can use one of the SFP+ ports. Refer to [SFP+ port information](/magic-wan/configuration/connector/configure-hardware-connector/sfp-port-information/) for more information on the hardware supported.",
 	noConnectorShows: "You need to have bought a Connector already for it to show up here. Refer to [Prerequisites](#prerequisites) if no Connector shows up in this list.",
diff --git a/src/content/docs/magic-wan/configuration/connector/configure-virtual-connector.mdx b/src/content/docs/magic-wan/configuration/connector/configure-virtual-connector.mdx
index 1da57d3d018bb4..85f563182fddd4 100644
--- a/src/content/docs/magic-wan/configuration/connector/configure-virtual-connector.mdx
+++ b/src/content/docs/magic-wan/configuration/connector/configure-virtual-connector.mdx
@@ -10,7 +10,6 @@ import { Render } from "~/components";
 <Render file="connector/configure-connectors" params={{
 	magicWord: "virtual",
 	productName: "Virtual Connector",
-	productNameType: "the machine with your Virtual Connector VM",
 	wan: "needs to correspond to the virtual network interface on the Virtual Connector instance you have set up in VMware. Following our example from the previous steps, you need to choose port `1` since that is what corresponds to the `eno1` port we set up in VMware.",
 	lan: "needs to correspond to the virtual LAN interface on the Virtual Connector instance you have set up in VMware. Following our example from the previous steps, you need to choose port `2` since that is what corresponds to the `eno2` port we set up in VMware.",
 	noConnectorShows: "For a Virtual Connector to show up you need to have already obtained your [OVA package and licence keys](#obtain-the-virtual-connector-image).",
diff --git a/src/content/partials/magic-wan/connector/configure-connectors.mdx b/src/content/partials/magic-wan/connector/configure-connectors.mdx
index 6d7a4cf08ab9c3..09005ccf560c3f 100644
--- a/src/content/partials/magic-wan/connector/configure-connectors.mdx
+++ b/src/content/partials/magic-wan/connector/configure-connectors.mdx
@@ -2,7 +2,6 @@
 params:
   - magicWord
   - productName
-  - productNameType
   - wan
   - lan
   - noConnectorShows