Merge branch 'main' of https://github.com/codingABI/id3esp32obd2

Author: codingABI

README.md

@@ -22,6 +22,16 @@ The following diagnostics data values are supported at the moment:
 - HV Total discharge
 - HV battery capacity
 - 12V battery voltage
+- HV PTC heater current
+- Outside temperature
+- Inside temperature
+- Cruising range
+- Charging state
+- CO2 content interior
+- GPS time
+- GPS height
+- GPS latitude
+- GPS longitude
 
 **WARNING:**
 - Connecting something to your VW ID.3 is your own risk and do this ONLY, if you know, what are you doing. If you make a mistake, it could be a very expensive mistake.
@@ -91,7 +101,7 @@ The code for the ESP32 was written with the Arduino IDE and can be found in the
 The voltage divider R1/R2 is used to measure the 12V car battery voltage with an ESP32 analog pin.
 
 ### Android App
-To show the VW ID.3 diagnostics data sent by the device via Bluetooth an Android device with the app [id3esp32obd2 app](id3esp32obd2.apk) is needed. This app is a small app made with https://appinventor.mit.edu/ (Source code: [App source code](id3esp32obd2.aia)) for this project and was tested on a Samsung Galaxy S10 5G with Android 12. To install the apk file you have to temporary allow the installation (Samsung: Settings->Apps->Top right dots...->Special access->Install unknown app).
+To show the VW ID.3 diagnostics data sent by the device via Bluetooth an Android device with the app [id3esp32obd2 app](id3esp32obd2.apk) is needed. This app is a small app made with https://appinventor.mit.edu/ (Source code: [App source code](id3esp32obd2.aia)) for this project and was tested on a Samsung Galaxy S10 5G with Android 12 and Samsung Galaxy S23 with Android 13. To install the apk file you have to temporary allow the installation (Samsung: Settings->Apps->Top right dots...->Special access->Install unknown app).
 
 #### Bluetooth pairing and selecting the device
 Before you can use the app, you have to pair the Android device with the *id3esp32obd2* device listed as *"id3esp32obd2"* in your Android Bluetooth management.
@@ -118,9 +128,16 @@ Shows the current car speed
 ![Dashboard 2](assets/images/appDash2.jpg)
 
 Values mainly for the high voltage HV battery.
+
 #### Dashboard: Charge/Discharge
 ![Dashboard 3](assets/images/appDash3.jpg)
 
 Mixed dashboard to collect data for power consumption. You can reset the delta/differential values with ♺ right to the value.
+
+#### Dashboard: GPS
+![Dashboard 4](assets/images/appDash4.jpg)
+
+Values from the car GPS. The GPS time will be used as ESP32 device time. 
+
 #### Info screen
 ![App info screen](assets/images/appInfoScreen.jpg)