Nest card seems wrong when heater is in heat/cool mode

[dejaloomer]

As image shows, the dial is yellow and sets a single temperature. I believe it should be red and blue and allow setting the low and high temps.
On 0.0.7

[z3ugma]

Yes, that's correct and in progress. What's wrong is that we are sending a target_temperature topic instead of a target_temperature_high and a target_temperature_low topic only.

Related to home-assistant/core#156223

[urbanframe]

Hi @z3ugma
Ive noticed that when my Nest Gen 2 thermostat is set to 'Heat' mode, it is displaying the target_temperature_high and target_temperature_low values on the entities card.

If I remove target_temperature_high and target_temperature_low values in developer tools in Home Assistant, the entities card correctly shows the target temperature.

The documentation doesn't specify, but do you think the high and low targets should only be sent to HA, if the mode is Heat/cool? Sounds like an issue with Home Assistant but do you think the NLE add on could remove the high low values when in Heat mode?

[dejaloomer]

I submitted a PR for this on the submodule repo. "use target_temperature_high/low for heat_cool mode and target_temperature for other modes. Clear out the values not appropriate for the current mode so the thermostat control UI works"