Problems with rwMarkable

[Der-Norden]

I get the following output during installation:

⚙️ Using Default Settings on node pve
🆔 Container ID: 108
🖥️ Operating System: debian (13)
📦 Container Type: Unprivileged
💾 Disk Size: 6 GB
🧠 CPU Cores: 2
🛠️ RAM Size: 2048 MiB
🚀 Creating a rwMarkable LXC using the above default settings

✔️ Storage local (Free: 14.1TB Used: 1023.6MB) [Template]
✔️ Storage local-zfs (Free: 14.1TB Used: 55.4GB) [Container]
✔️ Template debian-13-standard_13.1-2_amd64.tar.zst [online]
💡 Template debian-13-standard_13.1-2_amd64.tar.zst is missing or corrupted. Re-downloading.
✔️ Template download successful.
✔️ LXC Container 108 was successfully created.
✔️ Started LXC Container
✔️ Network in LXC is reachable (ping)
✔️ Customized LXC Container
✔️ Set up Container OS
✔️ Network Connected: 192.168.11.164
✔️ IPv4 Internet Connected
✖️ IPv6 Internet Not Connected
✔️ Git DNS: github.com:(✔️ ) raw.githubusercontent.com:(✔️ ) api.github.com:(✔️ ) git.community-scripts.org:(✔️ )
✔️ Updated Container OS
✔️ Setup Node.js 22
✔️ Installed Node.js modules: yarn
✔️ Deployed: rwMarkable (1.6.1)
⠦ Installing rwMarkable
[ERROR] in line 159: exit code 0: while executing command "$@" > /dev/null 2>&1
⠧ Installing rwMarkable
[ERROR] in line 1345: exit code 0: while executing command lxc-attach -n "$CTID" -- bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/install/${var_install}.sh)"

Can anyone verify this?

[tremor021]

Cant reproduce....

Run in Verbose mode

[Der-Norden]

My output:

⚙️  Using Default Settings on node pvek1 (🔍  Verbose)
  🆔  Container ID: 109
  🖥️  Operating System: debian (13)
  📦  Container Type: Unprivileged
  💾  Disk Size: 6 GB
  🧠  CPU Cores: 2
  🛠️  RAM Size: 2048 MiB
  🔍  Verbose Mode: Enabled
  🚀  Creating a rwMarkable LXC using the above default settings
  
  ✔️   Storage local (Free: 14.1TB  Used: 1.2GB) [Template]
  ✔️   Storage local-zfs (Free: 14.1TB  Used: 57.8GB) [Container]
  ✔️   Template debian-13-standard_13.1-2_amd64.tar.zst [local]
  ✔️   LXC Container 109 was successfully created.
  ✔️   Started LXC Container
  ✔️   Network in LXC is reachable (ping)
  ✔️   Customized LXC Container
  ✔️   Set up Container OS
  ✔️   Network Connected: 192.168.11.184 
  ✔️   IPv4 Internet Connected
   ✖️   IPv6 Internet Not Connected
  ✔️   Git DNS: github.com:(✔️ ) raw.githubusercontent.com:(✔️ ) api.github.com:(✔️ ) git.community-scripts.org:(✔️ )
Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
  ✔️   Updated Container OS
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package 'nodejs' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

removed 27 packages, and changed 77 packages in 2s

28 packages are looking for funding
  run `npm fund` for details
  ✔️   Setup Node.js 22

added 1 package in 448ms
  ✔️   Installed Node.js modules: yarn
  ✔️   Deployed: rwMarkable (1.6.1)
yarn install v1.22.22
[1/4] Resolving packages...
[2/4] Fetching packages...
[3/4] Linking dependencies...
warning " > @tiptap/[email protected]" has unmet peer dependency "@tiptap/core@^3.4.4".
warning " > @tiptap/[email protected]" has incorrect peer dependency "@tiptap/pm@^3.4.4".
warning " > @tiptap/[email protected]" has unmet peer dependency "highlight.js@^11".
warning " > @tiptap/[email protected]" has unmet peer dependency "@tiptap/core@^3.1.0".
warning " > @tiptap/[email protected]" has unmet peer dependency "@tiptap/core@^3.1.0".
warning " > @tiptap/[email protected]" has unmet peer dependency "@tiptap/core@^3.1.0".
warning " > @tiptap/[email protected]" has unmet peer dependency "@tiptap/core@^3.4.4".
warning " > @tiptap/[email protected]" has incorrect peer dependency "@tiptap/pm@^3.4.4".
warning " > @tiptap/[email protected]" has unmet peer dependency "@tiptap/core@^3.1.0".
warning "@tiptap/react > @tiptap/[email protected]" has unmet peer dependency "@tiptap/core@^3.1.0".
warning "@tiptap/react > @tiptap/[email protected]" has unmet peer dependency "@floating-ui/dom@^1.0.0".
warning "@tiptap/react > @tiptap/[email protected]" has unmet peer dependency "@tiptap/core@^3.1.0".
warning "next-pwa > [email protected]" has unmet peer dependency "@babel/core@^7.0.0".
warning "next-pwa > [email protected]" has unmet peer dependency "webpack@>=2".
warning "next-pwa > [email protected]" has unmet peer dependency "webpack@>=4.0.0 <6.0.0".
warning "next-pwa > [email protected]" has unmet peer dependency "webpack@^5.1.0".
warning "next-pwa > [email protected]" has unmet peer dependency "webpack@^4.4.0 || ^5.9.0".
[4/4] Building fresh packages...
Done in 17.41s.
yarn run v1.22.22
$ /opt/rwmarkable/node_modules/.bin/next telemetry disable
Attention: Next.js now collects completely anonymous telemetry regarding usage.
This information is used to shape Next.js' roadmap and prioritize features.
You can learn more, including how to opt-out if you'd not like to participate in this anonymous program, by visiting the following URL:
https://nextjs.org/telemetry

Your preference has been saved to /root/.config/nextjs-nodejs/config.json.

Status: Disabled

You have opted-out of Next.js' anonymous telemetry program.
No data will be collected from your machine.
Learn more: https://nextjs.org/telemetry

Done in 0.12s.
yarn run v1.22.22
$ next build
   ▲ Next.js 14.0.4

> [PWA] Compile server
> [PWA] Compile server
> [PWA] Compile client (static)
> [PWA] Auto register service worker with: /opt/rwmarkable/node_modules/next-pwa/register.js
> [PWA] Service worker: /opt/rwmarkable/public/sw.js
> [PWA]   url: /sw.js
> [PWA]   scope: /
 ✓ Creating an optimized production build    
 ✓ Compiled successfully
   Linting and checking validity of types  .Killed
error Command failed with exit code 137.
info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command.

[ERROR] in line 23: exit code 0: while executing command $STD yarn build

[ERROR] in line 1345: exit code 0: while executing command lxc-attach -n "$CTID" -- bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/install/${var_install}.sh)"

root@pvek1:~# 

[tremor021]

Thats a out of memory error. Try giving the container more memory, like:

var_ram=4096 bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/ct/rwmarkable.sh)"