Issues with GLPI 11 LXC Installation

[BrianBonnell]

I have GLPI 10 already running in production. I am attempting to setup a new GLPI 11 Instance to migrate to. I am installing this on my Proxmox VE 9.x environments (both production and dev are VE 9.0 now). It appears that the Bookworm LXC installation fails for GLPI 11

Proxmox Helper Script Fails to install:

🧩 Using Advanced Settings on node pve6b
🖥️ Operating System: debian
🌟 Version: 12
📦 Container Type: Unprivileged
🔐 Root Password: ********
🆔 Container ID: 138
🏠 Hostname: glpi11
💾 Disk Size: 200 GB
🧠 CPU Cores: 2
🛠️ RAM Size: 2048 MiB
🌉 Bridge: Office
📡 IPv4: DHCP
📡 IPv6: Disabled
📡 APT-Cacher IP Address: Default
⚙️ Interface MTU Size: Default
🔍 DNS Search Domain: Host
📡 DNS Server IP Address: Host
🏷️ Vlan: Default
📡 Tags: community-script;asset-management;foss
🔑 Root SSH Access: yes
🗂️ Enable FUSE Support: yes
🔍 Verbose Mode: yes
🚀 Creating a GLPI LXC using the above advanced settings
💡 Writing configuration to /opt/community-scripts/glpi.conf
✔️ Storage local (Free: 1.5TB Used: 237.8GB) [Template]
✔️ Storage local-zfs (Free: 1.5TB Used: 1.8TB) [Container]
✔️ Cluster is quorate
✔️ Template debian-12-standard_12.12-1_amd64.tar.zst [local]
✔️ LXC Container 138 was successfully created.
✔️ Started LXC Container
💡 No network in LXC yet (try 1/10) – waiting...
💡 No network in LXC yet (try 2/10) – waiting...
💡 No network in LXC yet (try 3/10) – waiting...
✔️ Network in LXC is reachable (ping)
✔️ Customized LXC Container
✔️ Set up Container OS
✔️ Network Connected: 192.168.100.86
✔️ IPv4 Internet Connected
✖️ IPv6 Internet Not Connected
✔️ Git DNS: github.com:(✔️ ) raw.githubusercontent.com:(✔️ ) api.github.com:(✔️ ) git.community-scripts.org:(✔️ )
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian bookworm-updates InRelease
Hit:3 http://security.debian.org/ bookworm-security InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following packages will be upgraded:
libssl3 openssl
2 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 3,463 kB of archives.
After this operation, 0 B of additional disk space will be used.
Get:1 http://security.debian.org/ bookworm-security/main amd64 libssl3 amd64 3.0.17-1deb12u3 [2,028 kB]
Get:2 http://security.debian.org/ bookworm-security/main amd64 openssl amd64 3.0.17-1deb12u3 [1,434 kB]
Fetched 3,463 kB in 0s (72.6 MB/s)
apt-listchanges: Reading changelogs...
(Reading database ... 20346 files and directories currently installed.)
Preparing to unpack .../libssl3_3.0.17-1deb12u3_amd64.deb ...
Unpacking libssl3:amd64 (3.0.17-1deb12u3) over (3.0.17-1deb12u2) ...
Preparing to unpack .../openssl_3.0.17-1deb12u3_amd64.deb ...
Unpacking openssl (3.0.17-1deb12u3) over (3.0.17-1deb12u2) ...
Setting up libssl3:amd64 (3.0.17-1deb12u3) ...
Setting up openssl (3.0.17-1deb12u3) ...
Processing triggers for man-db (2.11.2-2) ...
Processing triggers for libc-bin (2.36-9+deb12u13) ...
✔️ Updated Container OS
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
E: Unable to locate package php8.4-apcu
E: Couldn't find any package by glob 'php8.4-apcu'
E: Couldn't find any package by regex 'php8.4-apcu'
E: Unable to locate package php8.4-cli
E: Couldn't find any package by glob 'php8.4-cli'
E: Couldn't find any package by regex 'php8.4-cli'
E: Unable to locate package php8.4-common
E: Couldn't find any package by glob 'php8.4-common'
E: Couldn't find any package by regex 'php8.4-common'
E: Unable to locate package php8.4-curl
E: Couldn't find any package by glob 'php8.4-curl'
E: Couldn't find any package by regex 'php8.4-curl'
E: Unable to locate package php8.4-gd
E: Couldn't find any package by glob 'php8.4-gd'
E: Couldn't find any package by regex 'php8.4-gd'
E: Unable to locate package php8.4-ldap
E: Couldn't find any package by glob 'php8.4-ldap'
E: Couldn't find any package by regex 'php8.4-ldap'
E: Unable to locate package php8.4-mysql
E: Couldn't find any package by glob 'php8.4-mysql'
E: Couldn't find any package by regex 'php8.4-mysql'
E: Unable to locate package php8.4-xmlrpc
E: Couldn't find any package by glob 'php8.4-xmlrpc'
E: Couldn't find any package by regex 'php8.4-xmlrpc'
E: Unable to locate package php8.4-xml
E: Couldn't find any package by glob 'php8.4-xml'
E: Couldn't find any package by regex 'php8.4-xml'
E: Unable to locate package php8.4-mbstring
E: Couldn't find any package by glob 'php8.4-mbstring'
E: Couldn't find any package by regex 'php8.4-mbstring'
E: Unable to locate package php8.4-bcmath
E: Couldn't find any package by glob 'php8.4-bcmath'
E: Couldn't find any package by regex 'php8.4-bcmath'
E: Unable to locate package php8.4-intl
E: Couldn't find any package by glob 'php8.4-intl'
E: Couldn't find any package by regex 'php8.4-intl'
E: Unable to locate package php8.4-zip
E: Couldn't find any package by glob 'php8.4-zip'
E: Couldn't find any package by regex 'php8.4-zip'
E: Unable to locate package php8.4-redis
E: Couldn't find any package by glob 'php8.4-redis'
E: Couldn't find any package by regex 'php8.4-redis'
E: Unable to locate package php8.4-bz2
E: Couldn't find any package by glob 'php8.4-bz2'
E: Couldn't find any package by regex 'php8.4-bz2'
E: Unable to locate package php8.4-soap
E: Couldn't find any package by glob 'php8.4-soap'
E: Couldn't find any package by regex 'php8.4-soap'

[ERROR] in line 17: exit code 0: while executing command $STD apt-get install -y git apache2 php8.4-{apcu,cli,common,curl,gd,ldap,mysql,xmlrpc,xml,mbstring,bcmath,intl,zip,redis,bz2,soap} php-cas libapache2-mod-php

[ERROR] in line 1345: exit code 0: while executing command lxc-attach -n "$CTID" -- bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/install/${var_install}.sh)"

Please advise.
Thanks in advance.

[tremor021]

Will be fixed when #8443 merges. Next time please use proper Issue template

[BrianBonnell]

I was not able to submit a bug report, as I appear to NOT have access(I get access denied) to submitting a bug report if that is the Issue Template your referring to. Is there a way I can request access to submitting a bug report?