Replies: 7 comments
-
Beta Was this translation helpful? Give feedback.
-
|
@drrcastro Can you provide some more info about your CPU? Namely:
Additionally, can you check what version of libmimalloc is installed: In the Immich LXC run |
Beta Was this translation helpful? Give feedback.
-
|
In the meantime I changed the resoures to 48 cpus, 8gb RAM and 8gb SWAP, I ran for a couple of minutes pinned at 100% but managed to finish the update. So at least from my side the issue is closed |
Beta Was this translation helpful? Give feedback.
-
|
Wow that's insane! I certainly hope that isn't what it takes every time there's a new revision to compile. I suggest that you create an Issue on the Immich repo - perhaps try creating it in their base-images repo since this is related to that part of things. As for the script, I'm pretty sure that's not the issue, so I'm closing this. |
Beta Was this translation helpful? Give feedback.
-
|
I know this issue is closed now, but for anyone coming back here with the same error, I set my LXC to use all cores on the machine (32), gave it 16Gb of RAM and 4Gb swap, then rebooted it. Ran the update after that and everything went flawlessly. Not sure what changing this config fixed but it works now. P.S. Trying the update with <16Gb RAM caused the CPU to get pegged at 100% so me thinks this is some kind of memory related problem. |
Beta Was this translation helpful? Give feedback.
-
|
I'll convert this to a discussion. What CPU do you have? OP has a dual-socket Xeon, and I'm thinking that might have something to do with it. Just a hunch though. |
Beta Was this translation helpful? Give feedback.
-
|
Ooh yeah thats interesting I have a dual socket Xeon setup too (albeit a much older E5-2690 V1 setup). Ive put the CPU InfoArchitecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Address sizes: 46 bits physical, 48 bits virtual
Byte Order: Little Endian
CPU(s): 32
On-line CPU(s) list: 0-31
Vendor ID: GenuineIntel
Model name: Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz
CPU family: 6
Model: 45
Thread(s) per core: 2
Core(s) per socket: 8
Socket(s): 2
Stepping: 7
CPU(s) scaling MHz: 48%
CPU max MHz: 3800.0000
CPU min MHz: 1200.0000
BogoMIPS: 5786.06
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm
pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aper
fmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic popcn
t tsc_deadline_timer aes xsave avx lahf_lm epb pti tpr_shadow flexpriority ept vpid xsaveopt dtherm ida arat pln pt
s vnmi
Virtualization features:
Virtualization: VT-x
Caches (sum of all):
L1d: 512 KiB (16 instances)
L1i: 512 KiB (16 instances)
L2: 4 MiB (16 instances)
L3: 40 MiB (2 instances)
NUMA:
NUMA node(s): 2
NUMA node0 CPU(s): 0-7,16-23
NUMA node1 CPU(s): 8-15,24-31
Vulnerabilities:
Gather data sampling: Not affected
Ghostwrite: Not affected
Indirect target selection: Not affected
Itlb multihit: KVM: Mitigation: Split huge pages
L1tf: Mitigation; PTE Inversion; VMX conditional cache flushes, SMT vulnerable
Mds: Vulnerable: Clear CPU buffers attempted, no microcode; SMT vulnerable
Meltdown: Mitigation; PTI
Mmio stale data: Unknown: No mitigations
Reg file data sampling: Not affected
Retbleed: Not affected
Spec rstack overflow: Not affected
Spec store bypass: Vulnerable
Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization
Spectre v2: Mitigation; Retpolines; STIBP disabled; RSB filling; PBRSB-eIBRS Not affected; BHI Not affected
Srbds: Not affected
Tsa: Not affected
Tsx async abort: Not affected
Vmscape: Vulnerable
|
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
✅ Have you read and understood the above guidelines?
yes
📜 What is the name of the script you are using?
Immich
📂 What was the exact command used to execute the script?
update
⚙️ What settings are you using?
🖥️ Which Linux distribution are you using?
No response
📈 Which Proxmox version are you on?
pve-manager/9.0.11/3bf5476b8a4699e2 (running kernel: 6.14.11-4-pve)
📝 Provide a clear and concise description of the issue.
Hi!
after I type update on the Immich LXC console I get this error:
I also noted that the LXC container has all its resources pinned at 100% before the error
🔄 Steps to reproduce the issue.
Step 1: Open immich container console
Step 2: type
update❌ Paste the full error output (if available).
And here is the detailed error when updating with Verbose:
🖼️ Additional context (optional).
No response
Beta Was this translation helpful? Give feedback.
All reactions