Karakeep - install error

[JohnyBeGood]

✅ Have you read and understood the above guidelines?

yes

📜 What is the name of the script you are using?

Karakeep

📂 What was the exact command used to execute the script?

bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/ct/karakeep.sh)"

⚙️ What settings are you using?

• Default Settings
• Advanced Settings

🖥️ Which Linux distribution are you using?

No response

📝 Provide a clear and concise description of the issue.

Unable to install inside the Proxmox.

🔄 Steps to reproduce the issue.

Start either standard or advanced install. It will show an error at the end (/dev/fd/63: line 73: SPINNER_PID: unbound variable) and complain there is no network. Even though the error is shown, it creates the container.
At one point I had few of them running.
Updated Proxmox and rebooted, made sure there was a network connection. It does not make any difference.

❌ Paste the full error output (if available).

---

/ /______ __________ / /____ ___ ____
/ /// __ / ___/ __ / /// _ / _ / __
/ ,< / // / / / // / ,< / / / // /
//||_,// _,//||_/_/ .__/
//
🧩 Using Advanced Settings on node pve-main
🖥️ Operating System: debian
🌟 Version: 12
📦 Container Type: Unprivileged
🔐 Root Password: ********
🆔 Container ID: 128
🏠 Hostname: karakeep
💾 Disk Size: 20 GB
🧠 CPU Cores: 2
🛠️ RAM Size: 4096 MiB
🌉 Bridge: vmbr0
📡 IP Address: dhcp
🌐 Gateway IP Address: Default
📡 APT-Cacher IP Address: Default
🚫 Disable IPv6: yes
⚙️ Interface MTU Size: Default
🔍 DNS Search Domain: Host
📡 DNS Server IP Address: Host
🏷️ Vlan: Default
📡 Tags: community-script;bookmark
🔑 Root SSH Access: yes
🔍 Verbose Mode: yes
🚀 Creating a karakeep LXC using the above advanced settings
✔️ Using local for Template Storage.
✔️ Using local-zfs for Container Storage.
✔️ Updated LXC Template List
✔️ LXC Template is ready to use.
✔️ LXC Container 128 was successfully created.
✔️ Started LXC Container
net.ipv6.conf.all.disable_ipv6 = 1
⠹ ✖️ No Network! ner OS
✖️ No Network After 10 Tries
📡 Check Network Settings
/dev/fd/63: line 73: SPINNER_PID: unbound variable
root@pve-main:~#

🖼️ Additional context (optional).

Did another advanced install with verbose:

__                    __                 

/ /______ __________ / /____ ___ ____
/ /// __ / ___/ __ / /// _ / _ / __
/ ,< / // / / / // / ,< / / / // /
//||_,// _,//||_/_/ .__/
//
🧩 Using Advanced Settings on node pve-main
🖥️ Operating System: debian
🌟 Version: 12
📦 Container Type: Unprivileged
🔐 Root Password: ********
🆔 Container ID: 125
🏠 Hostname: karakeep
💾 Disk Size: 20 GB
🧠 CPU Cores: 2
🛠️ RAM Size: 4096 MiB
🌉 Bridge: vmbr0
📡 IP Address: dhcp
🌐 Gateway IP Address: Default
📡 APT-Cacher IP Address: Default
🚫 Disable IPv6: yes
⚙️ Interface MTU Size: Default
🔍 DNS Search Domain: Host
📡 DNS Server IP Address: Host
🏷️ Vlan: Default
📡 Tags: community-script;bookmark
🔑 Root SSH Access: yes
🔍 Verbose Mode: yes
🚀 Creating a karakeep LXC using the above advanced settings
✔️ Using local for Template Storage.
✔️ Using local-zfs for Container Storage.
✔️ Updated LXC Template List
✔️ LXC Template is ready to use.
✔️ LXC Container 125 was successfully created.
✔️ Started LXC Container
net.ipv6.conf.all.disable_ipv6 = 1
⠹ ✖️ No Network! ner OS
✖️ No Network After 10 Tries
📡 Check Network Settings
/dev/fd/63: line 73: SPINNER_PID: unbound variable
root@pve-main:~#

No response

[michelroegl-brunner]

You have issues with your network, wich is not a Script issue.
Please check your PVE Node settings that vmbr0 has access to a DHCP server.
Or test by giving the container a fixed IP Address during advanced install.

[MickLesk]

You dont get an IP/hostname inside the LXC. The node does not matter in this case. It happens at runtime in the LXC itself. This either receives no IP or no host name from the DHCP.

[JohnyBeGood]

Thanks for taking the time to reply!

So, I narrowed it down. It turns out Adguard on my OPNsense is blocking some of the domains. My guess is github as I'm not sure what other urls script is downloading from during the install. I added this to my custom filter rules.
@@||github.com^ @@||raw.githubusercontent.com^ @@||deb.debian.org^ @@||security.debian.org^ @@||archive.ubuntu.com^ @@||download.proxmox.com^
Still testing to see if that solves the issue and will report back. Posting this to help others.

This is a temporary fix:

[JohnyBeGood]

Just is case someone runs into the same issue. Adding custom rules above did not help. Adding Google DNS as a secondary DNS in Proxmox solved the issue.