Update Snap Case STL files (#250)

- Give some more space for audio, micro usb and board stilts.
- Use a 45-degree chamfer instead of a rounding to make printing easier.
- Move one cable tunnel from scanner part slightly.

Author: kayth21

docs/enclosures/README.md

@@ -2,7 +2,7 @@
 
 There are a few case designs made by the community:
 
-## Specter DIY Snap Case
+## Specter-DIY Snap Case
 
 ![](../pictures/gallery/snap-case-double-2.jpg)
 
@@ -12,9 +12,9 @@ The printable STL files are available for download in the [snapcase](./snapcase/
 
 Please note that the prints are quite tight around the hardware components. They are well tested with a Prusa MK3s and Specter hardware components from late 2022. Other printers or newer or older hardware may produce results that do not fit. Please check carefully that the prints do not exert pressure on any hardware components and don't exert any pressure yourself. 
 
-Contact me if you have any questions or suggestions. Success stories are also very welcome. :) You can reach me at @kayth21 (Twitter) or @SeedSticks (Telegram).
+Contact me if you have any questions or suggestions. Success stories are also very welcome. :) You can reach me on [Twitter (@kayth21)](https://twitter.com/kayth21) or on [Telegram (@SeedSticks)](https://t.me/SeedSticks).
 
-You can also buy the snap case, or a fully assembled Specter DIY, from [bitcoin-store.org](https://bitcoin-store.org).
+You can also buy a snap case, or a fully assembled Specter-DIY, from [bitcoin-store.org](https://bitcoin-store.org).
 
 ## SeedSigner's "Barebones" enclosure, v2
 

docs/enclosures/snapcase/README.md

@@ -1,16 +1,16 @@
-# Specter DIY Snap Case
+# Specter-DIY Snap Case
 
 ![](../../pictures/gallery/snap-case-bronze-black-1.jpg)
 
-Specter DIY Snap Case is a print it yourself snap case with the waveshare scanner on the backside. It consists of a middle part, in which the camera is held and the cables are fixed, and an upper and a lower part, which can be plugged together. 
+Specter-DIY Snap Case is a print it yourself snap case with the waveshare scanner on the backside. It consists of a scanner part, in which the scanner is held and the cables are fixed, and a frontside and a backside part, which can be plugged together. 
 
 ## Please note
 
 The prints are quite tight around the hardware components. They are well tested with a Prusa MK3s and Specter hardware components from late 2022. Other printers or newer or older hardware may produce results that do not fit. Please check carefully that the prints do not exert pressure on any hardware components and don't exert any pressure yourself. 
 
 ## Assembly
 
-Please note that this manual assumes that you are familiar with the basic assembly of a Specter DIY and therefore only addresses the specialties associated with this case. If not, please head over to the [docs](../../)
+Please note that this manual assumes that you are familiar with the basic assembly of a Specter-DIY and therefore only addresses the specialties associated with this case. If not, please head over to the [docs](../../).
 
 ### Print all the parts
 
@@ -49,4 +49,4 @@ Contact me if you have any questions or suggestions. Success stories are also ve
 
 ## Shop
 
-You can also buy the snap case, or a fully assembled Specter DIY, from [bitcoin-store.org](https://bitcoin-store.org).
+You can also buy a snap case, or a fully assembled Specter-DIY, from [bitcoin-store.org](https://bitcoin-store.org).