Merge tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.11-rc1.

  Nothing earth-shattering in here, just constant forward progress in
  adding support for new hardware and better debugging functionalities
  for thunderbolt devices and the subsystem. Included in here are:

   - thunderbolt debugging update and driver additions

   - xhci driver updates

   - typec driver updates

   - kselftest device driver changes (acked by the relevant maintainers,
     depended on other changes in this tree.)

   - cdns3 driver updates

   - gadget driver updates

   - MODULE_DESCRIPTION() additions

   - dwc3 driver updates and fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
  kselftest: devices: Add test to detect device error logs
  kselftest: Move ksft helper module to common directory
  kselftest: devices: Move discoverable devices test to subdirectory
  usb: gadget: f_uac2: fix non-newline-terminated function name
  USB: uas: Implement the new shutdown callback
  USB: core: add 'shutdown' callback to usb_driver
  usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
  usb: dwc2: add support for other Lantiq SoCs
  usb: gadget: Use u16 types for 16-bit fields
  usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
  usb: dwc3: core: Check all ports when set phy suspend
  usb: typec: tcpci: add support to set connector orientation
  dt-bindings: usb: Convert fsl-usb to yaml
  usb: typec: ucsi: reorder operations in ucsi_run_command()
  usb: typec: ucsi: extract common code for command handling
  usb: typec: ucsi: inline ucsi_read_message_in
  usb: typec: ucsi: rework command execution functions
  usb: typec: ucsi: split read operation
  usb: typec: ucsi: simplify command sending API
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd

@@ -75,3 +75,13 @@ Description:
 		The default value is 1  (GNU Remote Debug command).
 		Other permissible value is 0 which is for vendor defined debug
 		target.
+
+What:		/sys/bus/pci/drivers/xhci_hcd/.../dbc_poll_interval_ms
+Date:		February 2024
+Contact:	Mathias Nyman <[email protected]>
+Description:
+		This attribute adjust the polling interval used to check for
+		DbC events. Unit is milliseconds. Accepted values range from 0
+		up to 5000. The default value is 64 ms.
+		This polling interval is used while DbC is enabled but has no
+		active data transfers.

Documentation/admin-guide/kernel-parameters.txt

@@ -7041,6 +7041,9 @@
 	usb-storage.delay_use=
 			[UMS] The delay in seconds before a new device is
 			scanned for Logical Units (default 1).
+			Optionally the delay in milliseconds if the value has
+			suffix with "ms".
+			Example: delay_use=2567ms
 
 	usb-storage.quirks=
 			[UMS] A list of quirks entries to supplement or

Documentation/devicetree/bindings/usb/cdns,usb3.yaml

@@ -42,8 +42,11 @@ properties:
       - const: otg
       - const: wakeup
 
-  dr_mode:
-    enum: [host, otg, peripheral]
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      This port is used with the 'usb-role-switch' property to connect the
+      cdns3 to type C connector.
 
   maximum-speed:
     enum: [super-speed, high-speed, full-speed]
@@ -70,14 +73,20 @@ properties:
     description: Enable resetting of PHY if Rx fail is detected
     type: boolean
 
+dependencies:
+  port: [ usb-role-switch ]
+
 required:
   - compatible
   - reg
   - reg-names
   - interrupts
   - interrupt-names
 
-additionalProperties: false
+allOf:
+  - $ref: usb-drd.yaml#
+
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/usb/dwc2.yaml

@@ -188,7 +188,7 @@ required:
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/usb/fsl,usb2.yaml

@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,usb2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale SOC USB controllers
+
+maintainers:
+  - Frank Li <[email protected]>
+
+description: |
+  The device node for a USB controller that is part of a Freescale
+  SOC is as described in the document "Open Firmware Recommended
+  Practice: Universal Serial Bus" with the following modifications
+  and additions.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl-usb2-mph
+          - fsl-usb2-dr
+      - items:
+          - enum:
+              - fsl-usb2-dr-v2.2
+              - fsl-usb2-dr-v2.5
+          - const: fsl-usb2-dr
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy_type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum: [ulpi, serial, utmi, utmi_wide]
+
+  port0:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates port0 is connected for fsl-usb2-mph compatible controllers.
+
+  port1:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Indicates port1 is connected for "fsl-usb2-mph" compatible controllers.
+
+  fsl,invert-drvvbus:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      for MPC5121 USB0 only. Indicates the
+      port power polarity of internal PHY signal DRVVBUS is inverted.
+
+  fsl,invert-pwr-fault:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      for MPC5121 USB0 only. Indicates
+      the PWR_FAULT signal polarity is inverted.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - phy_type
+
+allOf:
+  - $ref: usb-drd.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb@22000 {
+        compatible = "fsl-usb2-mph";
+        reg = <22000 1000>;
+        interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+        phy_type = "ulpi";
+        port0;
+        port1;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    usb@23000 {
+        compatible = "fsl-usb2-dr";
+        reg = <23000 1000>;
+        interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+        dr_mode = "otg";
+        phy_type = "ulpi";
+    };

Documentation/devicetree/bindings/usb/fsl-usb.txt

@@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
 maintainers:
   - Icenowy Zheng <[email protected]>
 
-allOf:
-  - $ref: usb-device.yaml#
-
 properties:
   compatible:
     enum:
@@ -27,17 +24,44 @@ properties:
 
   vdd-supply:
     description:
-      the regulator that provides 3.3V core power to the hub.
+      The regulator that provides 3.3V or 5.0V core power to the hub.
 
   peer-hub:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
-      phandle to the peer hub on the controller.
+      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
+      with shared resets and power supplies, this property is used to identify
+      the hubs with which these are shared.
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-device.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,608
+    then:
+      properties:
+        peer-hub: false
+        vdd-supply: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,610
+              - usb5e3,620
+    then:
+      properties:
+        peer-hub: true
+        vdd-supply: true
+
 additionalProperties: false
 
 examples:
@@ -54,3 +78,29 @@ examples:
             reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+
+        /* 3.1 hub on port 4 */
+        hub_3_0: hub@2 {
+            compatible = "usb5e3,620";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };

Documentation/devicetree/bindings/usb/genesys,gl850g.yaml

@@ -22,6 +22,7 @@ properties:
           - nxp,cbdtu02043
           - onnn,fsusb43l10x
           - pericom,pi3usb102
+          - ti,tmuxhs4212
       - const: gpio-sbu-mux
 
   enable-gpios:
@@ -44,13 +45,18 @@ properties:
 
 required:
   - compatible
-  - enable-gpios
   - select-gpios
   - orientation-switch
   - port
 
 allOf:
   - $ref: usb-switch.yaml#
+  - if:
+      required:
+        - mode-switch
+    then:
+      required:
+        - enable-gpios
 
 additionalProperties: false
 

Documentation/devicetree/bindings/usb/gpio-sbu-mux.yaml

@@ -34,6 +34,13 @@ properties:
   clocks:
     maxItems: 1
 
+  microchip,ext-vbus-drv:
+    description:
+      Some ULPI USB PHYs do not support an internal VBUS supply and driving
+      the CPEN pin requires the configuration of the UPLI_USE__EXTVBUS
+      bit in ULPI_BUSCONTROL.
+    $ref: /schemas/types.yaml#/definitions/flag
+
 required:
   - compatible
   - reg