Merge tag 'nand/for-6.9' into mtd/next

Raw NAND

The main series brought is an update of the Broadcom support to support
all BCMBCA SoCs and their specificity (ECC, write protection,
configuration straps), plus a few misc fixes and changes in the main
driver. Device tree updates are also part of this PR, initially because
of a misunderstanding on my side.

The STM32_FMC2 controller driver is also upgraded to properly support
MP1 and MP25 SoCs.

A new compatible is added for an Atmel flavor.

Among all these feature changes, there is as well a load of continuous
read related fixes, avoiding more corner conditions and clarifying the
logic. Finally a few miscellaneous fixes are made to the core, the
lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as
final one in the Hynix vendor driver.

SPI-NAND

The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for W25N04KV
chips.

Author: miquelraynal

Documentation/devicetree/bindings/mtd/atmel-nand.txt

@@ -56,6 +56,7 @@ Required properties:
 	"atmel,sama5d4-pmecc"
 	"atmel,sama5d2-pmecc"
 	"microchip,sam9x60-pmecc"
+	"microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc"
 - reg: should contain 2 register ranges. The first one is pointing to the PMECC
        block, and the second one to the PMECC_ERRLOC block.
 

Documentation/devicetree/bindings/mtd/brcm,brcmnand.yaml

@@ -9,6 +9,7 @@ title: Broadcom STB NAND Controller
 maintainers:
   - Brian Norris <[email protected]>
   - Kamal Dasu <[email protected]>
+  - William Zhang <[email protected]>
 
 description: |
   The Broadcom Set-Top Box NAND controller supports low-level access to raw NAND
@@ -18,9 +19,10 @@ description: |
   supports basic PROGRAM and READ functions, among other features.
 
   This controller was originally designed for STB SoCs (BCM7xxx) but is now
-  available on a variety of Broadcom SoCs, including some BCM3xxx, BCM63xx, and
-  iProc/Cygnus. Its history includes several similar (but not fully register
-  compatible) versions.
+  available on a variety of Broadcom SoCs, including some BCM3xxx, MIPS based
+  Broadband SoC (BCM63xx), ARM based Broadband SoC (BCMBCA) and iProc/Cygnus.
+  Its history includes several similar (but not fully register compatible)
+  versions.
 
   -- Additional SoC-specific NAND controller properties --
 
@@ -53,7 +55,7 @@ properties:
               - brcm,brcmnand-v7.2
               - brcm,brcmnand-v7.3
           - const: brcm,brcmnand
-      - description: BCM63138 SoC-specific NAND controller
+      - description: BCMBCA SoC-specific NAND controller
         items:
           - const: brcm,nand-bcm63138
           - enum:
@@ -111,6 +113,13 @@ properties:
       earlier versions of this core that include WP
     type: boolean
 
+  brcm,wp-not-connected:
+    description:
+      Use this property when WP pin is not physically wired to the NAND chip.
+      Write protection feature cannot be used. By default, controller assumes
+      the pin is connected and feature is used.
+    $ref: /schemas/types.yaml#/definitions/flag
+
 patternProperties:
   "^nand@[a-f0-9]$":
     type: object
@@ -137,6 +146,15 @@ patternProperties:
           layout.
         $ref: /schemas/types.yaml#/definitions/uint32
 
+      brcm,nand-ecc-use-strap:
+        description:
+          This property requires the host system to get the ECC related
+          settings from the SoC NAND boot strap configuration instead of
+          the generic NAND ECC settings. This is a common hardware design
+          on BCMBCA based boards. This strap ECC option and generic NAND
+          ECC option can not be specified at the same time.
+        $ref: /schemas/types.yaml#/definitions/flag
+
     unevaluatedProperties: false
 
 allOf:
@@ -177,19 +195,35 @@ allOf:
             - const: iproc-idm
             - const: iproc-ext
   - if:
+      required:
+        - interrupts
       properties:
         interrupts:
           minItems: 2
     then:
       required:
         - interrupt-names
 
+  - if:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          required:
+            - brcm,nand-ecc-use-strap
+    then:
+      patternProperties:
+        "^nand@[a-f0-9]$":
+          properties:
+            nand-ecc-strength: false
+            nand-ecc-step-size: false
+            nand-ecc-maximize: false
+            nand-ecc-algo: false
+            brcm,nand-oob-sector-size: false
+
 unevaluatedProperties: false
 
 required:
   - reg
   - reg-names
-  - interrupts
 
 examples:
   - |

Documentation/devicetree/bindings/mtd/st,stm32-fmc2-nand.yaml

@@ -14,10 +14,11 @@ properties:
     enum:
       - st,stm32mp15-fmc2
       - st,stm32mp1-fmc2-nfc
+      - st,stm32mp25-fmc2-nfc
 
   reg:
     minItems: 6
-    maxItems: 7
+    maxItems: 12
 
   interrupts:
     maxItems: 1
@@ -92,6 +93,28 @@ allOf:
             - description: Chip select 1 command
             - description: Chip select 1 address space
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp25-fmc2-nfc
+    then:
+      properties:
+        reg:
+          items:
+            - description: Chip select 0 data
+            - description: Chip select 0 command
+            - description: Chip select 0 address space
+            - description: Chip select 1 data
+            - description: Chip select 1 command
+            - description: Chip select 1 address space
+            - description: Chip select 2 data
+            - description: Chip select 2 command
+            - description: Chip select 2 address space
+            - description: Chip select 3 data
+            - description: Chip select 3 command
+            - description: Chip select 3 address space
+
 required:
   - compatible
   - reg

arch/arm/boot/dts/broadcom/bcm47622.dtsi

@@ -138,6 +138,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;

arch/arm/boot/dts/broadcom/bcm63138.dtsi

@@ -229,7 +229,12 @@
 			reg-names = "nand", "nand-int-base";
 			status = "disabled";
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "nand";
+			interrupt-names = "nand_ctlrdy";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
 		};
 
 		serial@4400 {

arch/arm/boot/dts/broadcom/bcm63148.dtsi

@@ -119,5 +119,19 @@
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x2000 0x600>, <0xf0 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm63178.dtsi

@@ -129,6 +129,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;

arch/arm/boot/dts/broadcom/bcm6756.dtsi

@@ -139,6 +139,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;

arch/arm/boot/dts/broadcom/bcm6846.dtsi

@@ -119,5 +119,19 @@
 			num-cs = <8>;
 			status = "disabled";
 		};
+
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
 	};
 };

arch/arm/boot/dts/broadcom/bcm6855.dtsi

@@ -129,6 +129,20 @@
 			status = "disabled";
 		};
 
+		nand_controller: nand-controller@1800 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+			reg = <0x1800 0x600>, <0x2000 0x10>;
+			reg-names = "nand", "nand-int-base";
+			status = "disabled";
+
+			nandcs: nand@0 {
+				compatible = "brcm,nandcs";
+				reg = <0>;
+			};
+		};
+
 		uart0: serial@12000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12000 0x1000>;