drm/msm/dpu: enable writeback on SM6350

Enable WB2 hardware block, enabling writeback support on this platform.

Signed-off-by: Dmitry Baryshkov <[email protected]>
Tested-by: Luca Weiss <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/570194/
Link: https://lore.kernel.org/r/[email protected]

Author: lumag

drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_6_4_sm6350.h

@@ -26,6 +26,7 @@ static const struct dpu_mdp_cfg sm6350_mdp = {
 		[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
 		[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
 		[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2c4, .bit_off = 8 },
+		[DPU_CLK_CTRL_WB2] = { .reg_off = 0x2bc, .bit_off = 16 },
 		[DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 },
 	},
 };
@@ -145,6 +146,21 @@ static const struct dpu_dsc_cfg sm6350_dsc[] = {
 	},
 };
 
+static const struct dpu_wb_cfg sm6350_wb[] = {
+	{
+		.name = "wb_2", .id = WB_2,
+		.base = 0x65000, .len = 0x2c8,
+		.features = WB_SM8250_MASK,
+		.format_list = wb2_formats_rgb,
+		.num_formats = ARRAY_SIZE(wb2_formats_rgb),
+		.clk_ctrl = DPU_CLK_CTRL_WB2,
+		.xin_id = 6,
+		.vbif_idx = VBIF_RT,
+		.maxlinewidth = 1920,
+		.intr_wb_done = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 4),
+	},
+};
+
 static const struct dpu_intf_cfg sm6350_intf[] = {
 	{
 		.name = "intf_0", .id = INTF_0,
@@ -218,6 +234,8 @@ const struct dpu_mdss_cfg dpu_sm6350_cfg = {
 	.dsc = sm6350_dsc,
 	.pingpong_count = ARRAY_SIZE(sm6350_pp),
 	.pingpong = sm6350_pp,
+	.wb_count = ARRAY_SIZE(sm6350_wb),
+	.wb = sm6350_wb,
 	.intf_count = ARRAY_SIZE(sm6350_intf),
 	.intf = sm6350_intf,
 	.vbif_count = ARRAY_SIZE(sdm845_vbif),