Merge branches 'clk-stm', 'clk-cleanup', 'clk-kunit' and 'clk-mediatek' into clk-next

 - Add reset support to Airoha EN7581 clk driver
 - Add module description to mediatek clk drivers

* clk-stm:
  clk: stm32mp25: add security clocks
  clk: stm32mp2: use of STM32 access controller

* clk-cleanup:
  clk: mxs: Use clamp() in clk_ref_round_rate() and clk_ref_set_rate()
  clk: lpc32xx: Constify struct regmap_config
  clk: xilinx: Constify struct regmap_config
  dt-bindings: clock: sprd,sc9860-clk: convert to YAML
  dt-bindings: clock: qoriq-clock: convert to yaml format
  clk: vexpress-osc: add missing MODULE_DESCRIPTION() macro
  clk: sifive: prci: fix module autoloading
  dt-bindings: clock: milbeaut: Drop providers and consumers from example
  clk: sprd: add missing MODULE_DESCRIPTION() macro
  clk: sophgo: add missing MODULE_DESCRIPTION() macro

* clk-kunit:
  clk: disable clk gate tests for s390
  clk: test: add missing MODULE_DESCRIPTION() macros

* clk-mediatek:
  clk: en7523: fix rate divider for slic and spi clocks
  clk: en7523: Remove PCIe reset open drain configuration for EN7581
  clk: en7523: Remove pcie prepare/unpreare callbacks for EN7581 SoC
  clk: en7523: Add reset-controller support for EN7581 SoC
  dt-bindings: clock: airoha: Add reset support to EN7581 clock binding
  dt-bindings: clock: mediatek: Document reset cells for MT8188 sys
  clk: mediatek: mt8173-infracfg: Handle unallocated infracfg when module
  dt-bindings: clock: mediatek: add syscon compatible for mt7622 pciesys
  clk: mediatek: Add a module description where missing

Author: bebarino

Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml

@@ -35,14 +35,18 @@ properties:
 
   reg:
     minItems: 2
-    maxItems: 3
+    maxItems: 4
 
   "#clock-cells":
     description:
       The first cell indicates the clock number, see [1] for available
       clocks.
     const: 1
 
+  '#reset-cells':
+    description: ID of the controller reset line
+    const: 1
+
 required:
   - compatible
   - reg
@@ -60,6 +64,8 @@ allOf:
             - description: scu base address
             - description: misc scu base address
 
+        '#reset-cells': false
+
   - if:
       properties:
         compatible:
@@ -70,6 +76,7 @@ allOf:
           items:
             - description: scu base address
             - description: misc scu base address
+            - description: reset base address
             - description: pb scu base address
 
 additionalProperties: false
@@ -83,3 +90,19 @@ examples:
             <0x1fb00000 0x1000>;
       #clock-cells = <1>;
     };
+
+  - |
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      scuclk: clock-controller@1fa20000 {
+        compatible = "airoha,en7581-scu";
+        reg = <0x0 0x1fa20000 0x0 0x400>,
+              <0x0 0x1fb00000 0x0 0x90>,
+              <0x0 0x1fb00830 0x0 0x8>,
+              <0x0 0x1fbe3400 0x0 0xfc>;
+              #clock-cells = <1>;
+              #reset-cells = <1>;
+      };
+    };

Documentation/devicetree/bindings/clock/fsl,qoriq-clock-legacy.yaml

@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock-legacy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Legacy Clock Block on Freescale QorIQ Platforms
+
+maintainers:
+  - Frank Li <[email protected]>
+
+description: |
+  These nodes are deprecated.  Kernels should continue to support
+  device trees with these nodes, but new device trees should not use them.
+
+  Most of the bindings are from the common clock binding[1].
+  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+  compatible:
+    enum:
+      - fsl,qoriq-core-pll-1.0
+      - fsl,qoriq-core-pll-2.0
+      - fsl,qoriq-core-mux-1.0
+      - fsl,qoriq-core-mux-2.0
+      - fsl,qoriq-sysclk-1.0
+      - fsl,qoriq-sysclk-2.0
+      - fsl,qoriq-platform-pll-1.0
+      - fsl,qoriq-platform-pll-2.0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    maxItems: 4
+
+  clock-names:
+    minItems: 1
+    maxItems: 4
+
+  clock-output-names:
+    minItems: 1
+    maxItems: 8
+
+  '#clock-cells':
+    minimum: 0
+    maximum: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,qoriq-sysclk-1.0
+              - fsl,qoriq-sysclk-2.0
+    then:
+      properties:
+        '#clock-cells':
+          const: 0
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - fsl,qoriq-core-pll-1.0
+              - fsl,qoriq-core-pll-2.0
+    then:
+      properties:
+        '#clock-cells':
+          const: 1
+          description: |
+            * 0 - equal to the PLL frequency
+            * 1 - equal to the PLL frequency divided by 2
+            * 2 - equal to the PLL frequency divided by 4
+

Documentation/devicetree/bindings/clock/fsl,qoriq-clock.yaml

@@ -0,0 +1,207 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,qoriq-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock Block on Freescale QorIQ Platforms
+
+maintainers:
+  - Frank Li <[email protected]>
+
+description: |
+  Freescale QorIQ chips take primary clocking input from the external
+  SYSCLK signal. The SYSCLK input (frequency) is multiplied using
+  multiple phase locked loops (PLL) to create a variety of frequencies
+  which can then be passed to a variety of internal logic, including
+  cores and peripheral IP blocks.
+  Please refer to the Reference Manual for details.
+
+  All references to "1.0" and "2.0" refer to the QorIQ chassis version to
+  which the chip complies.
+
+  Chassis Version    Example Chips
+  ---------------    -------------
+       1.0          p4080, p5020, p5040
+       2.0          t4240
+
+  Clock Provider
+
+  The clockgen node should act as a clock provider, though in older device
+  trees the children of the clockgen node are the clock providers.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - fsl,p2041-clockgen
+              - fsl,p3041-clockgen
+              - fsl,p4080-clockgen
+              - fsl,p5020-clockgen
+              - fsl,p5040-clockgen
+          - const: fsl,qoriq-clockgen-1.0
+      - items:
+          - enum:
+              - fsl,t1023-clockgen
+              - fsl,t1024-clockgen
+              - fsl,t1040-clockgen
+              - fsl,t1042-clockgen
+              - fsl,t2080-clockgen
+              - fsl,t2081-clockgen
+              - fsl,t4240-clockgen
+          - const: fsl,qoriq-clockgen-2.0
+      - items:
+          - enum:
+              - fsl,b4420-clockgen
+              - fsl,b4860-clockgen
+          - const: fsl,b4-clockgen
+      - items:
+          - enum:
+              - fsl,ls1012a-clockgen
+              - fsl,ls1021a-clockgen
+              - fsl,ls1028a-clockgen
+              - fsl,ls1043a-clockgen
+              - fsl,ls1046a-clockgen
+              - fsl,ls1088a-clockgen
+              - fsl,ls2080a-clockgen
+              - fsl,lx2160a-clockgen
+
+  reg:
+    maxItems: 1
+
+  ranges: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 2
+    description: |
+      The first cell of the clock specifier is the clock type, and the
+      second cell is the clock index for the specified type.
+
+        Type#  Name       Index Cell
+        0  sysclk          must be 0
+        1  cmux            index (n in CLKCnCSR)
+        2  hwaccel         index (n in CLKCGnHWACSR)
+        3  fman            0 for fm1, 1 for fm2
+        4  platform pll    n=pll/(n+1). For example, when n=1,
+                          that means output_freq=PLL_freq/2.
+        5  coreclk         must be 0
+
+  clock-frequency:
+    description: Input system clock frequency (SYSCLK)
+
+  clocks:
+    items:
+      - description:
+          sysclk may be provided as an input clock.  Either clock-frequency
+          or clocks must be provided.
+      - description:
+          A second input clock, called "coreclk", may be provided if
+          core PLLs are based on a different input clock from the
+          platform PLL.
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: coreclk
+
+patternProperties:
+  '^mux[0-9]@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^sysclk(-[a-z0-9]+)?$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^pll[0-9]@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+  '^platform\-pll@[a-f0-9]+$':
+    deprecated: true
+    $ref: fsl,qoriq-clock-legacy.yaml
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    /* clock provider example */
+    global-utilities@e1000 {
+        compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+        reg = <0xe1000 0x1000>;
+        clock-frequency = <133333333>;
+        #clock-cells = <2>;
+    };
+
+  - |
+    /* Legacy example */
+    global-utilities@e1000 {
+        compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
+        reg = <0xe1000 0x1000>;
+        ranges = <0x0 0xe1000 0x1000>;
+        clock-frequency = <133333333>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        #clock-cells = <2>;
+
+        sysclk: sysclk {
+            compatible = "fsl,qoriq-sysclk-1.0";
+            clock-output-names = "sysclk";
+            #clock-cells = <0>;
+        };
+
+        pll0: pll0@800 {
+            compatible = "fsl,qoriq-core-pll-1.0";
+            reg = <0x800 0x4>;
+            #clock-cells = <1>;
+            clocks = <&sysclk>;
+            clock-output-names = "pll0", "pll0-div2";
+        };
+
+        pll1: pll1@820 {
+            compatible = "fsl,qoriq-core-pll-1.0";
+            reg = <0x820 0x4>;
+            #clock-cells = <1>;
+            clocks = <&sysclk>;
+            clock-output-names = "pll1", "pll1-div2";
+        };
+
+        mux0: mux0@0 {
+            compatible = "fsl,qoriq-core-mux-1.0";
+            reg = <0x0 0x4>;
+            #clock-cells = <0>;
+            clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+            clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+            clock-output-names = "cmux0";
+        };
+
+        mux1: mux1@20 {
+            compatible = "fsl,qoriq-core-mux-1.0";
+            reg = <0x20 0x4>;
+            #clock-cells = <0>;
+            clocks = <&pll0 0>, <&pll0 1>, <&pll1 0>, <&pll1 1>;
+            clock-names = "pll0", "pll0-div2", "pll1", "pll1-div2";
+            clock-output-names = "cmux1";
+        };
+
+        platform-pll@c00 {
+            #clock-cells = <1>;
+            reg = <0xc00 0x4>;
+            compatible = "fsl,qoriq-platform-pll-1.0";
+            clocks = <&sysclk>;
+            clock-output-names = "platform-pll", "platform-pll-div2";
+        };
+    };

Documentation/devicetree/bindings/clock/mediatek,mt7622-pciesys.yaml

@@ -14,9 +14,11 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - mediatek,mt7622-pciesys
-      - mediatek,mt7629-pciesys
+    oneOf:
+      - items:
+          - const: mediatek,mt7622-pciesys
+          - const: syscon
+      - const: mediatek,mt7629-pciesys
 
   reg:
     maxItems: 1
@@ -38,7 +40,7 @@ additionalProperties: false
 examples:
   - |
     clock-controller@1a100800 {
-        compatible = "mediatek,mt7622-pciesys";
+        compatible = "mediatek,mt7622-pciesys", "syscon";
         reg = <0x1a100800 0x1000>;
         #clock-cells = <1>;
         #reset-cells = <1>;

Documentation/devicetree/bindings/clock/mediatek,mt8188-sys-clock.yaml

@@ -39,6 +39,9 @@ properties:
   '#clock-cells':
     const: 1
 
+  '#reset-cells':
+    const: 1
+
 required:
   - compatible
   - reg