thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM

Adding generic support for SoCs with tsens v1.0 IP with no RPM.
Due to lack of RPM, tsens has to be reset and enabled in the driver
init. SoCs can have support for more sensors than those which will
actually be enabled. As such, init will only enable those explicitly
added to the hw_ids array.

Co-developed-by: Sricharan Ramabadhran <[email protected]>
Signed-off-by: Sricharan Ramabadhran <[email protected]>
Signed-off-by: George Moussalem <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Link: https://lore.kernel.org/r/DS7PR19MB8883C5D7974C7735E23923769DCC2@DS7PR19MB8883.namprd19.prod.outlook.com
Signed-off-by: Daniel Lezcano <[email protected]>

Author: georgemoussalem

drivers/thermal/qcom/tsens-v1.c

@@ -79,6 +79,17 @@ static struct tsens_features tsens_v1_feat = {
 	.trip_max_temp	= 120000,
 };
 
+static struct tsens_features tsens_v1_no_rpm_feat = {
+	.ver_major	= VER_1_X_NO_RPM,
+	.crit_int	= 0,
+	.combo_int	= 0,
+	.adc		= 1,
+	.srot_split	= 1,
+	.max_sensors	= 11,
+	.trip_min_temp	= -40000,
+	.trip_max_temp	= 120000,
+};
+
 static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = {
 	/* ----- SROT ------ */
 	/* VERSION */
@@ -150,6 +161,43 @@ static int __init init_8956(struct tsens_priv *priv) {
 	return init_common(priv);
 }
 
+static int __init init_tsens_v1_no_rpm(struct tsens_priv *priv)
+{
+	int i, ret;
+	u32 mask = 0;
+
+	ret = init_common(priv);
+	if (ret < 0) {
+		dev_err(priv->dev, "Init common failed %d\n", ret);
+		return ret;
+	}
+
+	ret = regmap_field_write(priv->rf[TSENS_SW_RST], 1);
+	if (ret) {
+		dev_err(priv->dev, "Reset failed\n");
+		return ret;
+	}
+
+	for (i = 0; i < priv->num_sensors; i++)
+		mask |= BIT(priv->sensor[i].hw_id);
+
+	ret = regmap_field_update_bits(priv->rf[SENSOR_EN], mask, mask);
+	if (ret) {
+		dev_err(priv->dev, "Sensor Enable failed\n");
+		return ret;
+	}
+
+	ret = regmap_field_write(priv->rf[TSENS_EN], 1);
+	if (ret) {
+		dev_err(priv->dev, "Enable failed\n");
+		return ret;
+	}
+
+	ret = regmap_field_write(priv->rf[TSENS_SW_RST], 0);
+
+	return ret;
+}
+
 static const struct tsens_ops ops_generic_v1 = {
 	.init		= init_common,
 	.calibrate	= calibrate_v1,

drivers/thermal/qcom/tsens.c

@@ -975,10 +975,16 @@ int __init init_common(struct tsens_priv *priv)
 	ret = regmap_field_read(priv->rf[TSENS_EN], &enabled);
 	if (ret)
 		goto err_put_device;
-	if (!enabled && (tsens_version(priv) != VER_2_X_NO_RPM)) {
-		dev_err(dev, "%s: device not enabled\n", __func__);
-		ret = -ENODEV;
-		goto err_put_device;
+	if (!enabled) {
+		switch (tsens_version(priv)) {
+		case VER_1_X_NO_RPM:
+		case VER_2_X_NO_RPM:
+			break;
+		default:
+			dev_err(dev, "%s: device not enabled\n", __func__);
+			ret = -ENODEV;
+			goto err_put_device;
+		}
 	}
 
 	priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map,

drivers/thermal/qcom/tsens.h

@@ -34,6 +34,7 @@ enum tsens_ver {
 	VER_0 = 0,
 	VER_0_1,
 	VER_1_X,
+	VER_1_X_NO_RPM,
 	VER_2_X,
 	VER_2_X_NO_RPM,
 };