Merge tag 'asoc-v6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v6.12

This is a very large set of changes, almost all in drivers rather than
the core.  Even with the addition of several quite large drivers the
overall diffstat is negative thanks to the removal of some old Intel
board support which has been obsoleted by the AVS driver, helped a bit
by some factoring out into helpers (especially around the Soundwire
machine drivers for x86).

Highlights include:

 - More simplifications and cleanups throughout the subsystem from
   Morimoto-san.
 - Extensive cleanups and refactoring of the Soundwire drivers to make
   better use of helpers.
 - Removal of Intel machine support obsoleted by the AVS driver.
 - Lots of DT schema conversions.
 - Machine support for many AMD and Intel x86 platforms.
 - Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek RTL1320
   SoundWire and rev C, and Texas Instruments TAS2563

Author: tiwai

Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml

@@ -37,6 +37,24 @@ properties:
   "#interrupt-cells":
     const: 2
 
+  mediatek,hp-pull-down:
+    description:
+      Earphone driver positive output stage short to
+      the audio reference ground.
+    type: boolean
+
+  mediatek,micbias0-microvolt:
+    description: Selects MIC Bias 0 output voltage.
+    enum: [1700000, 1800000, 1900000, 2000000,
+           2100000, 2500000, 2600000, 2700000]
+    default: 1700000
+
+  mediatek,micbias1-microvolt:
+    description: Selects MIC Bias 1 output voltage.
+    enum: [1700000, 1800000, 1900000, 2000000,
+           2100000, 2500000, 2600000, 2700000]
+    default: 1700000
+
   regulators:
     type: object
     $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml
@@ -83,6 +101,9 @@ examples:
             interrupt-controller;
             #interrupt-cells = <2>;
 
+            mediatek,micbias0-microvolt = <1700000>;
+            mediatek,micbias1-microvolt = <1700000>;
+
             regulators {
                 mt6357_vproc_reg: buck-vproc {
                     regulator-name = "vproc";

Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.yaml

@@ -26,6 +26,13 @@ properties:
       A list off component DAPM widget. Each entry is a pair of strings,
       the first being the widget type, the second being the widget name
 
+  clocks:
+    minItems: 1
+    maxItems: 3
+    description:
+      Base PLL clocks of audio susbsytem, used to configure base clock
+      frequencies for different audio use-cases.
+
 patternProperties:
   "^dai-link-[0-9]+$":
     type: object

Documentation/devicetree/bindings/sound/amlogic,gx-sound-card.yaml

@@ -27,6 +27,13 @@ properties:
       A list off component DAPM widget. Each entry is a pair of strings,
       the first being the widget type, the second being the widget name
 
+  clocks:
+    minItems: 1
+    maxItems: 3
+    description:
+      Base PLL clocks of audio susbsytem, used to configure base clock
+      frequencies for different audio use-cases.
+
 patternProperties:
   "^dai-link-[0-9]+$":
     type: object

Documentation/devicetree/bindings/sound/cirrus,cs4271.yaml

@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,cs4271.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic CS4271 audio CODEC
+
+maintainers:
+  - Alexander Sverdlin <[email protected]>
+  - Nikita Shubin <[email protected]>
+
+description:
+  The CS4271 is a stereo audio codec. This device supports both the I2C
+  and the SPI bus.
+
+allOf:
+  - $ref: dai-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: cirrus,cs4271
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  '#sound-dai-cells':
+    const: 0
+
+  reset-gpios:
+    description:
+      This pin will be deasserted before communication to the codec starts.
+    maxItems: 1
+
+  va-supply:
+    description: Analog power supply.
+
+  vd-supply:
+    description: Digital power supply.
+
+  vl-supply:
+    description: Serial Control Port power supply.
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+  cirrus,amuteb-eq-bmutec:
+    description:
+      When given, the Codec's AMUTEB=BMUTEC flag is enabled.
+    type: boolean
+
+  cirrus,enable-soft-reset:
+    description: |
+      The CS4271 requires its LRCLK and MCLK to be stable before its RESET
+      line is de-asserted. That also means that clocks cannot be changed
+      without putting the chip back into hardware reset, which also requires
+      a complete re-initialization of all registers.
+
+      One (undocumented) workaround is to assert and de-assert the PDN bit
+      in the MODE2 register. This workaround can be enabled with this DT
+      property.
+
+      Note that this is not needed in case the clocks are stable
+      throughout the entire runtime of the codec.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        codec@0 {
+            compatible = "cirrus,cs4271";
+            reg = <0>;
+            #sound-dai-cells = <0>;
+            spi-max-frequency = <6000000>;
+            spi-cpol;
+            spi-cpha;
+            reset-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+            port {
+                endpoint {
+                    remote-endpoint = <&i2s_ep>;
+                };
+            };
+        };
+    };
+
+...

Documentation/devicetree/bindings/sound/cs4271.txt

@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/dlg,da7213.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA7212/DA7213 Audio Codec
+
+maintainers:
+  - Support Opensource <[email protected]>
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - dlg,da7212
+      - dlg,da7213
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: mclk
+
+  "#sound-dai-cells":
+    const: 0
+
+  dlg,micbias1-lvl:
+    description: Voltage (mV) for Mic Bias 1
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1600, 2200, 2500, 3000 ]
+
+  dlg,micbias2-lvl:
+    description: Voltage (mV) for Mic Bias 2
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1600, 2200, 2500, 3000 ]
+
+  dlg,dmic-data-sel:
+    description: DMIC channel select based on clock edge
+    enum: [ lrise_rfall, lfall_rrise ]
+
+  dlg,dmic-samplephase:
+    description: When to sample audio from DMIC
+    enum: [ on_clkedge, between_clkedge ]
+
+  dlg,dmic-clkrate:
+    description: DMIC clock frequency (Hz)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 1500000, 3000000 ]
+
+  VDDA-supply:
+    description: Analogue power supply
+
+  VDDIO-supply:
+    description: I/O power supply
+
+  VDDMIC-supply:
+    description: Mic Bias
+
+  VDDSP-supply:
+    description: Speaker supply
+
+  ports:
+    $ref: audio-graph-port.yaml#/definitions/ports
+
+  port:
+    $ref: audio-graph-port.yaml#
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "dlg,da7213";
+            reg = <0x1a>;
+
+            clocks = <&clks 201>;
+            clock-names = "mclk";
+
+            #sound-dai-cells = <0>;
+
+            dlg,micbias1-lvl = <2500>;
+            dlg,micbias2-lvl = <2500>;
+
+            dlg,dmic-data-sel = "lrise_rfall";
+            dlg,dmic-samplephase = "between_clkedge";
+            dlg,dmic-clkrate = <3000000>;
+        };
+    };