tools/power turbostat: Clustered Uncore MHz counters should honor show/hide options

The clustered uncore frequency counters, UMHz*.*
should honor the --show and --hide options.

All non-specified counters should be implicityly hidden.
But when --show was used, UMHz*.* showed up anyway:

$ sudo turbostat -q -S --show Busy%
Busy%  UMHz0.0  UMHz1.0  UMHz2.0  UMHz3.0  UMHz4.0

Indeed, there was no string that can be used to explicitly
show or hide clustered uncore counters.

Even through they are dynamically probed and added,
group the clustered UMHz*.* counters with the legacy
built-in-counter "UncMHz" for show/hide.

turbostat --show Busy%
	does not show UMHz*.*.
turbostat --show UncMHz
	shows either UncMHz or UMHz*.*, if present
turbostat --hide UncMHz
	hides either UncMHz or UMHz*.*, if present

Reported-by: Artem Bityutskiy <[email protected]>
Signed-off-by: Len Brown <[email protected]>
Tested-by: Artem Bityutskiy <[email protected]>

Author: lenb

tools/power/x86/turbostat/turbostat.8

@@ -199,6 +199,7 @@ The system configuration dump (if --quiet is not used) is followed by statistics
 \fBUncMHz\fP per-package uncore MHz, instantaneous sample.
 .PP
 \fBUMHz1.0\fP per-package uncore MHz for domain=1 and fabric_cluster=0, instantaneous sample.  System summary is the average of all packages.
+For the "--show" and "--hide" options, use "UncMHz" to operate on all UMHz*.* as a group.
 .SH TOO MUCH INFORMATION EXAMPLE
 By default, turbostat dumps all possible information -- a system configuration header, followed by columns for all counters.
 This is ideal for remote debugging, use the "--out" option to save everything to a text file, and get that file to the expert helping you debug.

tools/power/x86/turbostat/turbostat.c

@@ -6703,7 +6703,18 @@ static void probe_intel_uncore_frequency_cluster(void)
 		sprintf(path, "%s/current_freq_khz", path_base);
 		sprintf(name_buf, "UMHz%d.%d", domain_id, cluster_id);
 
-		add_counter(0, path, name_buf, 0, SCOPE_PACKAGE, COUNTER_K2M, FORMAT_AVERAGE, 0, package_id);
+		/*
+		 * Once add_couter() is called, that counter is always read
+		 * and reported -- So it is effectively (enabled & present).
+		 * Only call add_counter() here if legacy BIC_UNCORE_MHZ (UncMHz)
+		 * is (enabled).  Since we are in this routine, we
+		 * know we will not probe and set (present) the legacy counter.
+		 *
+		 * This allows "--show/--hide UncMHz" to be effective for
+		 * the clustered MHz counters, as a group.
+		 */
+		if BIC_IS_ENABLED(BIC_UNCORE_MHZ)
+			add_counter(0, path, name_buf, 0, SCOPE_PACKAGE, COUNTER_K2M, FORMAT_AVERAGE, 0, package_id);
 
 		if (quiet)
 			continue;