gpio: tqmx86: add support for changing GPIO directions

Only GPIOs 4..7 have IRQ support on the TQMx86 variants currently handled
by the driver, but apart from that, changing directions works fine. The
default directions are left unchanged (0..3 output, 4..7 input) to match
the COM Express specification.

A tqmx86_gpio_set() variant without locking is introduced as a new
helper.

Signed-off-by: Matthias Schiffer <[email protected]>
Link: https://lore.kernel.org/r/d89da2f0e13fa6c8ec3f9076eed242133a1e3a63.1734001247.git.matthias.schiffer@ew.tq-group.com
Signed-off-by: Bartosz Golaszewski <[email protected]>

Author: tq-schifferm

drivers/gpio/gpio-tqmx86.c

@@ -85,46 +85,62 @@ static int tqmx86_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	return !!(tqmx86_gpio_read(gpio, TQMX86_GPIOD) & BIT(offset));
 }
 
+static void _tqmx86_gpio_set(struct tqmx86_gpio_data *gpio, unsigned int offset,
+			     int value)
+	__must_hold(&gpio->spinlock)
+{
+	__assign_bit(offset, gpio->output, value);
+	tqmx86_gpio_write(gpio, bitmap_get_value8(gpio->output, 0), TQMX86_GPIOD);
+}
+
 static void tqmx86_gpio_set(struct gpio_chip *chip, unsigned int offset,
 			    int value)
 {
 	struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
 
 	guard(raw_spinlock_irqsave)(&gpio->spinlock);
 
-	__assign_bit(offset, gpio->output, value);
-	tqmx86_gpio_write(gpio, bitmap_get_value8(gpio->output, 0), TQMX86_GPIOD);
+	_tqmx86_gpio_set(gpio, offset, value);
 }
 
 static int tqmx86_gpio_direction_input(struct gpio_chip *chip,
 				       unsigned int offset)
 {
-	/* Direction cannot be changed. Validate is an input. */
-	if (BIT(offset) & TQMX86_DIR_INPUT_MASK)
-		return 0;
-	else
-		return -EINVAL;
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
+
+	guard(raw_spinlock_irqsave)(&gpio->spinlock);
+
+	tqmx86_gpio_clrsetbits(gpio, BIT(offset), 0, TQMX86_GPIODD);
+
+	return 0;
 }
 
 static int tqmx86_gpio_direction_output(struct gpio_chip *chip,
 					unsigned int offset,
 					int value)
 {
-	/* Direction cannot be changed, validate is an output */
-	if (BIT(offset) & TQMX86_DIR_INPUT_MASK)
-		return -EINVAL;
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
+
+	guard(raw_spinlock_irqsave)(&gpio->spinlock);
+
+	_tqmx86_gpio_set(gpio, offset, value);
+	tqmx86_gpio_clrsetbits(gpio, 0, BIT(offset), TQMX86_GPIODD);
 
-	tqmx86_gpio_set(chip, offset, value);
 	return 0;
 }
 
 static int tqmx86_gpio_get_direction(struct gpio_chip *chip,
 				     unsigned int offset)
 {
-	if (TQMX86_DIR_INPUT_MASK & BIT(offset))
-		return GPIO_LINE_DIRECTION_IN;
+	struct tqmx86_gpio_data *gpio = gpiochip_get_data(chip);
+	u8 val;
+
+	val = tqmx86_gpio_read(gpio, TQMX86_GPIODD);
+
+	if (val & BIT(offset))
+		return GPIO_LINE_DIRECTION_OUT;
 
-	return GPIO_LINE_DIRECTION_OUT;
+	return GPIO_LINE_DIRECTION_IN;
 }
 
 static void tqmx86_gpio_irq_config(struct tqmx86_gpio_data *gpio, int hwirq)