Merge tag 'qcom-clk-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-qcom

Pull Qualcomm clk driver updates from Bjorn Andersson:

 - Support for Display, TCSR, GPU, and Camera clock controllers for
   Qualcomm's X1 Elite SoC
 - Typo fixes in the IPQ5018 GCC driver
 - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
 - Properly terminate frequency tables in different qcom clk drivers
 - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
 - Add missing UFS CLKREF clks on Qualcomm SC8180X
 - Avoid significant delays during boot by adding a softdep on rpmhpd to SDM845 gcc driver
 - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC driver
 - Fix the custom GPU GX "do-nothing" method in the GDSC driver
 - Add an external regulator to GX GDSC on SC8280XP GPU clk driver
 - Switch display, GPU, video, and camera clock drivers to module_platform_driver()
 - Set a longer delay for Venus resets on many Qualcomm SoCs
 - Correct the GDSC wait times in the Qualcomm SDM845 display clk driver
 - Remove the unused Qualcomm sc7180 modem clk driver

* tag 'qcom-clk-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (62 commits)
  clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
  clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
  clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
  clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
  clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
  clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
  clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
  clk: qcom: dispcc-sdm845: Adjust internal GDSC wait times
  dt-bindings: clk: qcom: drop the SC7180 Modem subsystem clock controller
  clk: qcom: drop the SC7180 Modem subsystem clock driver
  clk: qcom: Use qcom_branch_set_clk_en()
  clk: qcom: branch: Add a helper for setting the enable bit
  clk: qcom: dispcc-sm8250: Make clk_init_data and pll_vco const
  clk: qcom: gcc-sc8180x: Add missing UFS QREF clocks
  clk: qcom: gcc-msm8953: add more resets
  clk: qcom: videocc-*: switch to module_platform_driver
  ...

Author: bebarino

Documentation/devicetree/bindings/clock/qcom,gpucc.yaml

@@ -53,6 +53,9 @@ properties:
   power-domains:
     maxItems: 1
 
+  vdd-gfx-supply:
+    description: Regulator supply for the VDD_GFX pads
+
   '#clock-cells':
     const: 1
 
@@ -74,6 +77,12 @@ required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+# Require that power-domains and vdd-gfx-supply are not both present
+not:
+  required:
+    - power-domains
+    - vdd-gfx-supply
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Q6SSTOP clock Controller
 
 maintainers:
-  - Govind Singh <govinds@codeaurora.org>
+  - Bjorn Andersson <andersson@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/clock/qcom,sc7180-mss.yaml

@@ -17,6 +17,7 @@ description: |
     include/dt-bindings/clock/qcom,sm8450-camcc.h
     include/dt-bindings/clock/qcom,sm8550-camcc.h
     include/dt-bindings/clock/qcom,sc8280xp-camcc.h
+    include/dt-bindings/clock/qcom,x1e80100-camcc.h
 
 allOf:
   - $ref: qcom,gcc.yaml#
@@ -27,6 +28,7 @@ properties:
       - qcom,sc8280xp-camcc
       - qcom,sm8450-camcc
       - qcom,sm8550-camcc
+      - qcom,x1e80100-camcc
 
   clocks:
     items:

Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml

@@ -18,13 +18,15 @@ description: |
     include/dt-bindings/clock/qcom,sm8550-gpucc.h
     include/dt-bindings/reset/qcom,sm8450-gpucc.h
     include/dt-bindings/reset/qcom,sm8650-gpucc.h
+    include/dt-bindings/reset/qcom,x1e80100-gpucc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8450-gpucc
       - qcom,sm8550-gpucc
       - qcom,sm8650-gpucc
+      - qcom,x1e80100-gpucc
 
   clocks:
     items:

Documentation/devicetree/bindings/clock/qcom,sm8450-gpucc.yaml

@@ -14,12 +14,17 @@ description: |
   Qualcomm display clock control module provides the clocks, resets and power
   domains on SM8550.
 
-  See also:: include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  See also:
+  - include/dt-bindings/clock/qcom,sm8550-dispcc.h
+  - include/dt-bindings/clock/qcom,sm8650-dispcc.h
+  - include/dt-bindings/clock/qcom,x1e80100-dispcc.h
 
 properties:
   compatible:
     enum:
       - qcom,sm8550-dispcc
+      - qcom,sm8650-dispcc
+      - qcom,x1e80100-dispcc
 
   clocks:
     items:

Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml

@@ -23,6 +23,7 @@ properties:
       - enum:
           - qcom,sm8550-tcsr
           - qcom,sm8650-tcsr
+          - qcom,x1e80100-tcsr
       - const: syscon
 
   clocks:

Documentation/devicetree/bindings/clock/qcom,sm8550-tcsr.yaml

@@ -20,6 +20,24 @@ menuconfig COMMON_CLK_QCOM
 
 if COMMON_CLK_QCOM
 
+config CLK_X1E80100_CAMCC
+	tristate "X1E80100 Camera Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select CLK_X1E80100_GCC
+	help
+	  Support for the camera clock controller on X1E80100 devices.
+	  Say Y if you want to support camera devices and camera functionality.
+
+config CLK_X1E80100_DISPCC
+	tristate "X1E80100 Display Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select CLK_X1E80100_GCC
+	help
+	  Support for the two display clock controllers on Qualcomm
+	  Technologies, Inc. X1E80100 devices.
+	  Say Y if you want to support display devices and functionality such as
+	  splash screen.
+
 config CLK_X1E80100_GCC
 	tristate "X1E80100 Global Clock Controller"
 	depends on ARM64 || COMPILE_TEST
@@ -30,6 +48,23 @@ config CLK_X1E80100_GCC
 	  Say Y if you want to use peripheral devices such as UART, SPI, I2C,
 	  USB, UFS, SD/eMMC, PCIe, etc.
 
+config CLK_X1E80100_GPUCC
+	tristate "X1E80100 Graphics Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select CLK_X1E80100_GCC
+	help
+	  Support for the graphics clock controller on X1E80100 devices.
+	  Say Y if you want to support graphics controller devices and
+	  functionality such as 3D graphics.
+
+config CLK_X1E80100_TCSRCC
+	tristate "X1E80100 TCSR Clock Controller"
+	depends on ARM64 || COMPILE_TEST
+	select QCOM_GDSC
+	help
+	  Support for the TCSR clock controller on X1E80100 devices.
+	  Say Y if you want to use peripheral devices such as SD/UFS.
+
 config QCOM_A53PLL
 	tristate "MSM8916 A53 PLL"
 	help
@@ -600,16 +635,6 @@ config SC_LPASS_CORECC_7280
 	  Say Y if you want to use LPASS clocks and power domains of the LPASS
 	  core clock controller.
 
-config SC_MSS_7180
-	tristate "SC7180 Modem Clock Controller"
-	depends on ARM64 || COMPILE_TEST
-	select SC_GCC_7180
-	help
-	  Support for the Modem Subsystem clock controller on Qualcomm
-	  Technologies, Inc on SC7180 devices.
-	  Say Y if you want to use the Modem branch clocks of the Modem
-	  subsystem clock controller to reset the MSS subsystem.
-
 config SC_VIDEOCC_7180
 	tristate "SC7180 Video Clock Controller"
 	depends on ARM64 || COMPILE_TEST

Documentation/devicetree/bindings/clock/qcom,sm8650-dispcc.yaml

@@ -21,7 +21,11 @@ clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
 obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
 obj-$(CONFIG_APQ_MMCC_8084) += mmcc-apq8084.o
 obj-$(CONFIG_CLK_GFM_LPASS_SM8250) += lpass-gfm-sm8250.o
+obj-$(CONFIG_CLK_X1E80100_CAMCC) += camcc-x1e80100.o
+obj-$(CONFIG_CLK_X1E80100_DISPCC) += dispcc-x1e80100.o
 obj-$(CONFIG_CLK_X1E80100_GCC) += gcc-x1e80100.o
+obj-$(CONFIG_CLK_X1E80100_GPUCC) += gpucc-x1e80100.o
+obj-$(CONFIG_CLK_X1E80100_TCSRCC) += tcsrcc-x1e80100.o
 obj-$(CONFIG_IPQ_APSS_PLL) += apss-ipq-pll.o
 obj-$(CONFIG_IPQ_APSS_6018) += apss-ipq6018.o
 obj-$(CONFIG_IPQ_GCC_4019) += gcc-ipq4019.o
@@ -87,7 +91,6 @@ obj-$(CONFIG_SC_LPASSCC_7280) += lpasscc-sc7280.o
 obj-$(CONFIG_SC_LPASSCC_8280XP) += lpasscc-sc8280xp.o
 obj-$(CONFIG_SC_LPASS_CORECC_7180) += lpasscorecc-sc7180.o
 obj-$(CONFIG_SC_LPASS_CORECC_7280) += lpasscorecc-sc7280.o lpassaudiocc-sc7280.o
-obj-$(CONFIG_SC_MSS_7180) += mss-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7180) += videocc-sc7180.o
 obj-$(CONFIG_SC_VIDEOCC_7280) += videocc-sc7280.o
 obj-$(CONFIG_SDM_CAMCC_845) += camcc-sdm845.o