power: supply: Use str_enable_disable-like helpers

Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read.  Ternary
   operator has three arguments and with wrapping might lead to quite
   long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
   file.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sebastian Reichel <[email protected]>

Author: krzk

drivers/power/supply/88pm860x_battery.c

@@ -14,6 +14,7 @@
 #include <linux/mutex.h>
 #include <linux/string.h>
 #include <linux/power_supply.h>
+#include <linux/string_choices.h>
 #include <linux/mfd/88pm860x.h>
 #include <linux/delay.h>
 
@@ -503,8 +504,7 @@ static void pm860x_init_battery(struct pm860x_battery_info *info)
 	data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
 	bat_remove = data & BAT_WU_LOG;
 
-	dev_dbg(info->dev, "battery wake up? %s\n",
-		bat_remove != 0 ? "yes" : "no");
+	dev_dbg(info->dev, "battery wake up? %s\n", str_yes_no(bat_remove));
 
 	/* restore SOC from RTC domain register */
 	if (bat_remove == 0) {

drivers/power/supply/charger-manager.c

@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/power/charger-manager.h>
 #include <linux/regulator/consumer.h>
+#include <linux/string_choices.h>
 #include <linux/sysfs.h>
 #include <linux/of.h>
 #include <linux/thermal.h>
@@ -1088,7 +1089,7 @@ static ssize_t charger_state_show(struct device *dev,
 	if (!charger->externally_control)
 		state = regulator_is_enabled(charger->consumer);
 
-	return sysfs_emit(buf, "%s\n", state ? "enabled" : "disabled");
+	return sysfs_emit(buf, "%s\n", str_enabled_disabled(state));
 }
 
 static ssize_t charger_externally_control_show(struct device *dev,

drivers/power/supply/cpcap-charger.c

@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/string_choices.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
 #include <linux/notifier.h>
@@ -515,7 +516,7 @@ static void cpcap_charger_vbus_work(struct work_struct *work)
 out_err:
 	cpcap_charger_update_state(ddata, POWER_SUPPLY_STATUS_UNKNOWN);
 	dev_err(ddata->dev, "%s could not %s vbus: %i\n", __func__,
-		ddata->vbus_enabled ? "enable" : "disable", error);
+		str_enable_disable(ddata->vbus_enabled), error);
 }
 
 static int cpcap_charger_set_vbus(struct phy_companion *comparator,

drivers/power/supply/da9030_battery.c

@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
+#include <linux/string_choices.h>
 #include <linux/mfd/da903x.h>
 
 #include <linux/debugfs.h>
@@ -138,7 +139,7 @@ static int bat_debug_show(struct seq_file *s, void *data)
 {
 	struct da9030_charger *charger = s->private;
 
-	seq_printf(s, "charger is %s\n", charger->is_on ? "on" : "off");
+	seq_printf(s, "charger is %s\n", str_on_off(charger->is_on));
 	if (charger->chdet) {
 		seq_printf(s, "iset = %dmA, vset = %dmV\n",
 			   charger->mA, charger->mV);

drivers/power/supply/sbs-battery.c

@@ -21,6 +21,7 @@
 #include <linux/power_supply.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
+#include <linux/string_choices.h>
 
 enum {
 	REG_MANUFACTURER_DATA,
@@ -320,8 +321,8 @@ static int sbs_update_presence(struct sbs_info *chip, bool is_present)
 		client->flags &= ~I2C_CLIENT_PEC;
 	}
 
-	dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ?
-		"enabled" : "disabled");
+	dev_dbg(&client->dev, "PEC: %s\n",
+		str_enabled_disabled(client->flags & I2C_CLIENT_PEC));
 
 	if (!chip->is_present && is_present && !chip->charger_broadcasts)
 		sbs_disable_charger_broadcasts(chip);