hwmon: (pmbus/tps25990) Add initial support

Add initial support for the Texas Instruments TPS25990 eFuse.
This adds the basic PMBUS telemetry support for the device.

From Karol Przybylski:
  The tps25990_read_word_data function contains a block of unreachable code
  caused by the syntactic structure in the PMBUS_VIRT_READ_IIN_MAX case.

  Specifically, the return TPS25990_READ_IIN_PEAK; statement immediately
  exits the function, making the next lines unreachable.

  This patch removes the return statement, leaving the expected handling.
  Discovered in coverity: CID 1602227

Tested-by: Vaishnav Achath <[email protected]>
Signed-off-by: Jerome Brunet <[email protected]>
[groeck: Adjust to MODULE_IMPORT_NS API change]
[[email protected]: Fix unreachable code in tps25990_read_word_data]
Signed-off-by: Guenter Roeck <[email protected]>

Author: jbrun3t

Documentation/hwmon/index.rst

@@ -236,6 +236,7 @@ Hardware Monitoring Kernel Drivers
    tmp464
    tmp513
    tps23861
+   tps25990
    tps40422
    tps53679
    tps546d24

Documentation/hwmon/tps25990.rst

@@ -0,0 +1,147 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver tps25990
+======================
+
+Supported chips:
+
+  * TI TPS25990
+
+    Prefix: 'tps25990'
+
+  * Datasheet
+
+    Publicly available at Texas Instruments website: https://www.ti.com/lit/gpn/tps25990
+
+Author:
+
+	Jerome Brunet <[email protected]>
+
+Description
+-----------
+
+This driver implements support for TI TPS25990 eFuse.
+This is an integrated, high-current circuit protection and power
+management device with PMBUS interface
+
+Device compliant with:
+
+- PMBus rev 1.3 interface.
+
+Device supports direct format for reading input voltages,
+output voltage, input current, input power and temperature.
+
+Due to the specificities of the chip, all history reset attributes
+are tied together. Resetting the history of a sensor, resets the
+history of all the sensors.
+
+The driver exports the following attributes via the 'sysfs' files
+for input current:
+
+**curr1_average**
+
+**curr1_crit**
+
+**curr1_crit_alarm**
+
+**curr1_highest**
+
+**curr1_input**
+
+**curr1_label**
+
+**curr1_max**
+
+**curr1_max_alarm**
+
+**curr1_reset_history**
+
+The driver provides the following attributes for main input voltage:
+
+**in1_average**
+
+**in1_crit**
+
+**in1_crit_alarm**
+
+**in1_highest**
+
+**in1_input**
+
+**in1_label**
+
+**in1_lcrit**
+
+**in1_lcrit_alarm**
+
+**in1_lowest**
+
+**in1_max**
+
+**in1_max_alarm**
+
+**in1_min**
+
+**in1_min_alarm**
+
+**in1_reset_history**
+
+The driver provides the following attributes for auxiliary input voltage:
+
+**in2_input**
+
+**in2_label**
+
+The driver provides the following attributes for output voltage:
+
+**in3_average**
+
+**in3_input**
+
+**in3_label**
+
+**in3_lowest**
+
+**in3_min**
+
+**in3_min_alarm**
+
+**in3_reset_history**
+
+The driver provides the following attributes for input power:
+
+**power1_alarm**
+
+**power1_average**
+
+**power1_input**
+
+**power1_input_highest**
+
+**power1_label**
+
+**power1_max**
+
+**power1_reset_history**
+
+The driver provides the following attributes for temperature:
+
+**temp1_average**
+
+**temp1_crit**
+
+**temp1_crit_alarm**
+
+**temp1_highest**
+
+**temp1_input**
+
+**temp1_max**
+
+**temp1_max_alarm**
+
+**temp1_reset_history**
+
+The driver provides the following attributes for sampling:
+
+**samples**

MAINTAINERS

@@ -23218,6 +23218,8 @@ M:	Jerome Brunet <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/hwmon/pmbus/ti,tps25990.yaml
+F:	Documentation/hwmon/tps25990.rst
+F:	drivers/hwmon/pmbus/tps25990.c
 
 TEXAS INSTRUMENTS TPS23861 PoE PSE DRIVER
 M:	Robert Marko <[email protected]>

drivers/hwmon/pmbus/Kconfig

@@ -510,6 +510,23 @@ config SENSORS_TDA38640_REGULATOR
 	  If you say yes here you get regulator support for Infineon
 	  TDA38640 as regulator.
 
+config SENSORS_TPS25990
+	tristate "TI TPS25990"
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  TPS25990.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tps25990.
+
+config SENSORS_TPS25990_REGULATOR
+	bool "Regulator support for TPS25990 and compatibles"
+	depends on SENSORS_TPS25990 && REGULATOR
+	default SENSORS_TPS25990
+	help
+	  If you say yes here you get regulator support for Texas Instruments
+	  TPS25990.
+
 config SENSORS_TPS40422
 	tristate "TI TPS40422"
 	help

drivers/hwmon/pmbus/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
 obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
 obj-$(CONFIG_SENSORS_STPDDC60)	+= stpddc60.o
 obj-$(CONFIG_SENSORS_TDA38640)	+= tda38640.o
+obj-$(CONFIG_SENSORS_TPS25990)	+= tps25990.o
 obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
 obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
 obj-$(CONFIG_SENSORS_TPS546D24)	+= tps546d24.o