soundwire: intel_ace2x: use DOAIS and DODS settings from firmware

Starting with LNL, the recommendation is to use settings read from DSD
properties instead of hard-coding the values.

The DOAIS and DODS values are completely-specific to Intel and are
stored in a vendor-specific property structure.

Signed-off-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>

Author: plbossart

drivers/soundwire/intel.h

@@ -58,6 +58,11 @@ struct sdw_intel {
 #endif
 };
 
+struct sdw_intel_prop {
+	u16 doais;
+	u16 dods;
+};
+
 enum intel_pdi_type {
 	INTEL_PDI_IN = 0,
 	INTEL_PDI_OUT = 1,

drivers/soundwire/intel_ace2x.c

@@ -25,12 +25,15 @@
 static void intel_shim_vs_init(struct sdw_intel *sdw)
 {
 	void __iomem *shim_vs = sdw->link_res->shim_vs;
+	struct sdw_bus *bus = &sdw->cdns.bus;
+	struct sdw_intel_prop *intel_prop;
 	u16 doais;
 	u16 dods;
 	u16 act;
 
-	doais = 0x3;
-	dods = 0x1;
+	intel_prop = bus->vendor_specific_prop;
+	doais = intel_prop->doais;
+	dods = intel_prop->dods;
 
 	act = intel_readw(shim_vs, SDW_SHIM2_INTEL_VS_ACTMCTL);
 	u16p_replace_bits(&act, doais, SDW_SHIM2_INTEL_VS_ACTMCTL_DOAIS);

drivers/soundwire/intel_auxdevice.c

@@ -122,6 +122,7 @@ static void generic_new_peripheral_assigned(struct sdw_bus *bus,
 static int sdw_master_read_intel_prop(struct sdw_bus *bus)
 {
 	struct sdw_master_prop *prop = &bus->prop;
+	struct sdw_intel_prop *intel_prop;
 	struct fwnode_handle *link;
 	char name[32];
 	u32 quirk_mask;
@@ -153,6 +154,26 @@ static int sdw_master_read_intel_prop(struct sdw_bus *bus)
 	prop->quirks = SDW_MASTER_QUIRKS_CLEAR_INITIAL_CLASH |
 		SDW_MASTER_QUIRKS_CLEAR_INITIAL_PARITY;
 
+	intel_prop = devm_kzalloc(bus->dev, sizeof(*intel_prop), GFP_KERNEL);
+	if (!intel_prop)
+		return -ENOMEM;
+
+	/* initialize with hardware defaults, in case the properties are not found */
+	intel_prop->doais = 0x3;
+	intel_prop->dods  = 0x1;
+
+	fwnode_property_read_u16(link,
+				 "intel-sdw-doais",
+				 &intel_prop->doais);
+	fwnode_property_read_u16(link,
+				 "intel-sdw-dods",
+				 &intel_prop->dods);
+	bus->vendor_specific_prop = intel_prop;
+
+	dev_dbg(bus->dev, "doais %#x dods %#x\n",
+		intel_prop->doais,
+		intel_prop->dods);
+
 	return 0;
 }
 

include/linux/soundwire/sdw.h

@@ -886,6 +886,7 @@ struct sdw_master_ops {
  * @port_ops: Master port callback ops
  * @params: Current bus parameters
  * @prop: Master properties
+ * @vendor_specific_prop: pointer to non-standard properties
  * @m_rt_list: List of Master instance of all stream(s) running on Bus. This
  * is used to compute and program bus bandwidth, clock, frame shape,
  * transport and port parameters
@@ -920,6 +921,7 @@ struct sdw_bus {
 	const struct sdw_master_port_ops *port_ops;
 	struct sdw_bus_params params;
 	struct sdw_master_prop prop;
+	void *vendor_specific_prop;
 	struct list_head m_rt_list;
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs;