Merge branch 'pci/controller/qcom'

- Drop endpoint redundant masking of global IRQ events (Manivannan
  Sadhasivam)

- Clarify unknown global IRQ message and only log it once to avoid a flood
  (Manivannan Sadhasivam)

- Add Manivannan Sadhasivam as maintainer of qcom endpoint driver
  (Manivannan Sadhasivam)

- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
  Sadhasivam)

- Assign PCI domain number for endpoint controllers (Manivannan Sadhasivam)

- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for endpoint
  controller (Manivannan Sadhasivam)

- Add global SPI interrupt for PCIe link events to DT binding (Manivannan
  Sadhasivam)

- Add global RC interrupt handler to handle 'Link up' events and
  automatically enumerate hot-added devices (Manivannan Sadhasivam)

- Avoid mirroring of DBI and iATU register space so it doesn't overlap BAR
  MMIO space (Prudhvi Yarlagadda)

- Enable controller resources like PHY only after PERST# is deasserted to
  partially avoid the problem that the endpoint SoC crashes when accessing
  things when Refclk is absent (Manivannan Sadhasivam)

- Rename dw_pcie.link_gen to max_link_speed to avoid ambiguity (Manivannan
  Sadhasivam)

- Cache maximum link speed value in dw_pcie.max_link_speed for use by
  vendor drivers (Manivannan Sadhasivam)

- Add 16.0 GT/s equalization and RX lane margining settings (Shashank Babu
  Chinta Venkata)

- Pass domain number to pci_bus_release_domain_nr() explicitly to avoid a
  NULL pointer dereference (Manivannan Sadhasivam)

* pci/controller/qcom:
  PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
  PCI: qcom: Add RX lane margining settings for 16.0 GT/s
  PCI: qcom: Add equalization settings for 16.0 GT/s
  PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
  PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
  PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
  PCI: qcom: Disable mirroring of DBI and iATU register space in BAR region
  PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt
  dt-bindings: PCI: qcom,pcie-sm8450: Add 'global' interrupt
  PCI: qcom-ep: Modify 'global_irq' and 'perst_irq' IRQ device names
  PCI: endpoint: Assign PCI domain number for endpoint controllers
  dt-bindings: PCI: pci-ep: Document 'linux,pci-domain' property
  dt-bindings: PCI: pci-ep: Update Maintainers
  PCI: qcom-ep: Reword the error message for receiving unknown global IRQ event
  PCI: qcom-ep: Drop the redundant masking of global IRQ events

Author: bjorn-helgaas

Documentation/devicetree/bindings/pci/pci-ep.yaml

@@ -10,7 +10,8 @@ description: |
   Common properties for PCI Endpoint Controller Nodes.
 
 maintainers:
-  - Kishon Vijay Abraham I <[email protected]>
+  - Kishon Vijay Abraham I <[email protected]>
+  - Manivannan Sadhasivam <[email protected]>
 
 properties:
   $nodename:
@@ -41,6 +42,17 @@ properties:
     default: 1
     maximum: 16
 
+  linux,pci-domain:
+    description:
+      If present this property assigns a fixed PCI domain number to a PCI
+      Endpoint Controller, otherwise an unstable (across boots) unique number
+      will be assigned. It is required to either not set this property at all
+      or set it for all PCI endpoint controllers in the system, otherwise
+      potentially conflicting domain numbers may be assigned to endpoint
+      controllers. The domain number for each endpoint controller in the system
+      must be unique.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
 required:
   - compatible
 

Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml

@@ -21,11 +21,11 @@ properties:
 
   interrupts:
     minItems: 1
-    maxItems: 8
+    maxItems: 9
 
   interrupt-names:
     minItems: 1
-    maxItems: 8
+    maxItems: 9
 
   iommu-map:
     minItems: 1

Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml

@@ -280,4 +280,5 @@ examples:
         phy-names = "pciephy";
         max-link-speed = <3>;
         num-lanes = <2>;
+        linux,pci-domain = <0>;
     };

Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml

@@ -55,8 +55,8 @@ properties:
       - const: aggre1 # Aggre NoC PCIe1 AXI clock
 
   interrupts:
-    minItems: 8
-    maxItems: 8
+    minItems: 9
+    maxItems: 9
 
   interrupt-names:
     items:
@@ -68,6 +68,7 @@ properties:
       - const: msi5
       - const: msi6
       - const: msi7
+      - const: global
 
   operating-points-v2: true
   opp-table:
@@ -149,9 +150,10 @@ examples:
                          <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
                          <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
             interrupt-names = "msi0", "msi1", "msi2", "msi3",
-                              "msi4", "msi5", "msi6", "msi7";
+                              "msi4", "msi5", "msi6", "msi7", "global";
             #interrupt-cells = <1>;
             interrupt-map-mask = <0 0 0 0x7>;
             interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */

MAINTAINERS

@@ -2728,7 +2728,7 @@ F:	drivers/iommu/msm*
 F:	drivers/mfd/ssbi.c
 F:	drivers/mmc/host/mmci_qcom*
 F:	drivers/mmc/host/sdhci-msm.c
-F:	drivers/pci/controller/dwc/pcie-qcom.c
+F:	drivers/pci/controller/dwc/pcie-qcom*
 F:	drivers/phy/qualcomm/
 F:	drivers/power/*/msm*
 F:	drivers/reset/reset-qcom-*
@@ -17754,6 +17754,7 @@ M:	Manivannan Sadhasivam <[email protected]>
 L:	[email protected]
 L:	[email protected]
 S:	Maintained
+F:	drivers/pci/controller/dwc/pcie-qcom-common.c
 F:	drivers/pci/controller/dwc/pcie-qcom.c
 
 PCIE DRIVER FOR ROCKCHIP
@@ -17790,6 +17791,7 @@ L:	[email protected]
 L:	[email protected]
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml
+F:	drivers/pci/controller/dwc/pcie-qcom-common.c
 F:	drivers/pci/controller/dwc/pcie-qcom-ep.c
 
 PCMCIA SUBSYSTEM

drivers/pci/controller/dwc/Kconfig

@@ -265,12 +265,16 @@ config PCIE_DW_PLAT_EP
 	  order to enable device-specific features PCI_DW_PLAT_EP must be
 	  selected.
 
+config PCIE_QCOM_COMMON
+	bool
+
 config PCIE_QCOM
 	bool "Qualcomm PCIe controller (host mode)"
 	depends on OF && (ARCH_QCOM || COMPILE_TEST)
 	depends on PCI_MSI
 	select PCIE_DW_HOST
 	select CRC8
+	select PCIE_QCOM_COMMON
 	help
 	  Say Y here to enable PCIe controller support on Qualcomm SoCs. The
 	  PCIe controller uses the DesignWare core plus Qualcomm-specific
@@ -281,6 +285,7 @@ config PCIE_QCOM_EP
 	depends on OF && (ARCH_QCOM || COMPILE_TEST)
 	depends on PCI_ENDPOINT
 	select PCIE_DW_EP
+	select PCIE_QCOM_COMMON
 	help
 	  Say Y here to enable support for the PCIe controllers on Qualcomm SoCs
 	  to work in endpoint mode. The PCIe controller uses the DesignWare core

drivers/pci/controller/dwc/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
 obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
 obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
 obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
+obj-$(CONFIG_PCIE_QCOM_COMMON) += pcie-qcom-common.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCIE_QCOM_EP) += pcie-qcom-ep.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o

drivers/pci/controller/dwc/pci-imx6.c

@@ -860,12 +860,12 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
 	if (ret)
 		goto err_reset_phy;
 
-	if (pci->link_gen > 1) {
+	if (pci->max_link_speed > 1) {
 		/* Allow faster modes after the link is up */
 		dw_pcie_dbi_ro_wr_en(pci);
 		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
 		tmp &= ~PCI_EXP_LNKCAP_SLS;
-		tmp |= pci->link_gen;
+		tmp |= pci->max_link_speed;
 		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
 
 		/*
@@ -1423,8 +1423,8 @@ static int imx_pcie_probe(struct platform_device *pdev)
 		imx_pcie->tx_swing_low = 127;
 
 	/* Limit link speed */
-	pci->link_gen = 1;
-	of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen);
+	pci->max_link_speed = 1;
+	of_property_read_u32(node, "fsl,max-link-speed", &pci->max_link_speed);
 
 	imx_pcie->vpcie = devm_regulator_get_optional(&pdev->dev, "vpcie");
 	if (IS_ERR(imx_pcie->vpcie)) {

drivers/pci/controller/dwc/pcie-designware.c

@@ -112,6 +112,7 @@ int dw_pcie_get_resources(struct dw_pcie *pci)
 		pci->dbi_base = devm_pci_remap_cfg_resource(pci->dev, res);
 		if (IS_ERR(pci->dbi_base))
 			return PTR_ERR(pci->dbi_base);
+		pci->dbi_phys_addr = res->start;
 	}
 
 	/* DBI2 is mainly useful for the endpoint controller */
@@ -134,6 +135,7 @@ int dw_pcie_get_resources(struct dw_pcie *pci)
 			pci->atu_base = devm_ioremap_resource(pci->dev, res);
 			if (IS_ERR(pci->atu_base))
 				return PTR_ERR(pci->atu_base);
+			pci->atu_phys_addr = res->start;
 		} else {
 			pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET;
 		}
@@ -166,8 +168,8 @@ int dw_pcie_get_resources(struct dw_pcie *pci)
 			return ret;
 	}
 
-	if (pci->link_gen < 1)
-		pci->link_gen = of_pci_get_max_link_speed(np);
+	if (pci->max_link_speed < 1)
+		pci->max_link_speed = of_pci_get_max_link_speed(np);
 
 	of_property_read_u32(np, "num-lanes", &pci->num_lanes);
 
@@ -687,16 +689,27 @@ void dw_pcie_upconfig_setup(struct dw_pcie *pci)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_upconfig_setup);
 
-static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
+static void dw_pcie_link_set_max_speed(struct dw_pcie *pci)
 {
 	u32 cap, ctrl2, link_speed;
 	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 
 	cap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
+
+	/*
+	 * Even if the platform doesn't want to limit the maximum link speed,
+	 * just cache the hardware default value so that the vendor drivers can
+	 * use it to do any link specific configuration.
+	 */
+	if (pci->max_link_speed < 1) {
+		pci->max_link_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, cap);
+		return;
+	}
+
 	ctrl2 = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCTL2);
 	ctrl2 &= ~PCI_EXP_LNKCTL2_TLS;
 
-	switch (pcie_link_speed[link_gen]) {
+	switch (pcie_link_speed[pci->max_link_speed]) {
 	case PCIE_SPEED_2_5GT:
 		link_speed = PCI_EXP_LNKCTL2_TLS_2_5GT;
 		break;
@@ -1058,8 +1071,7 @@ void dw_pcie_setup(struct dw_pcie *pci)
 {
 	u32 val;
 
-	if (pci->link_gen > 0)
-		dw_pcie_link_set_max_speed(pci, pci->link_gen);
+	dw_pcie_link_set_max_speed(pci);
 
 	/* Configure Gen1 N_FTS */
 	if (pci->n_fts[0]) {

drivers/pci/controller/dwc/pcie-designware.h

@@ -125,6 +125,19 @@
 #define GEN3_RELATED_OFF_GEN3_EQ_DISABLE	BIT(16)
 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_SHIFT	24
 #define GEN3_RELATED_OFF_RATE_SHADOW_SEL_MASK	GENMASK(25, 24)
+#define GEN3_RELATED_OFF_RATE_SHADOW_SEL_16_0GT	0x1
+
+#define GEN3_EQ_CONTROL_OFF			0x8A8
+#define GEN3_EQ_CONTROL_OFF_FB_MODE		GENMASK(3, 0)
+#define GEN3_EQ_CONTROL_OFF_PHASE23_EXIT_MODE	BIT(4)
+#define GEN3_EQ_CONTROL_OFF_PSET_REQ_VEC	GENMASK(23, 8)
+#define GEN3_EQ_CONTROL_OFF_FOM_INC_INITIAL_EVAL	BIT(24)
+
+#define GEN3_EQ_FB_MODE_DIR_CHANGE_OFF		0x8AC
+#define GEN3_EQ_FMDC_T_MIN_PHASE23		GENMASK(4, 0)
+#define GEN3_EQ_FMDC_N_EVALS			GENMASK(9, 5)
+#define GEN3_EQ_FMDC_MAX_PRE_CUSROR_DELTA	GENMASK(13, 10)
+#define GEN3_EQ_FMDC_MAX_POST_CUSROR_DELTA	GENMASK(17, 14)
 
 #define PCIE_PORT_MULTI_LANE_CTRL	0x8C0
 #define PORT_MLTI_UPCFG_SUPPORT		BIT(7)
@@ -197,6 +210,24 @@
 
 #define PCIE_PL_CHK_REG_ERR_ADDR			0xB28
 
+/*
+ * 16.0 GT/s (Gen 4) lane margining register definitions
+ */
+#define GEN4_LANE_MARGINING_1_OFF		0xB80
+#define MARGINING_MAX_VOLTAGE_OFFSET		GENMASK(29, 24)
+#define MARGINING_NUM_VOLTAGE_STEPS		GENMASK(22, 16)
+#define MARGINING_MAX_TIMING_OFFSET		GENMASK(13, 8)
+#define MARGINING_NUM_TIMING_STEPS		GENMASK(5, 0)
+
+#define GEN4_LANE_MARGINING_2_OFF		0xB84
+#define MARGINING_IND_ERROR_SAMPLER		BIT(28)
+#define MARGINING_SAMPLE_REPORTING_METHOD	BIT(27)
+#define MARGINING_IND_LEFT_RIGHT_TIMING		BIT(26)
+#define MARGINING_IND_UP_DOWN_VOLTAGE		BIT(25)
+#define MARGINING_VOLTAGE_SUPPORTED		BIT(24)
+#define MARGINING_MAXLANES			GENMASK(20, 16)
+#define MARGINING_SAMPLE_RATE_TIMING		GENMASK(13, 8)
+#define MARGINING_SAMPLE_RATE_VOLTAGE		GENMASK(5, 0)
 /*
  * iATU Unroll-specific register definitions
  * From 4.80 core version the address translation will be made by unroll
@@ -407,8 +438,10 @@ struct dw_pcie_ops {
 struct dw_pcie {
 	struct device		*dev;
 	void __iomem		*dbi_base;
+	resource_size_t		dbi_phys_addr;
 	void __iomem		*dbi_base2;
 	void __iomem		*atu_base;
+	resource_size_t		atu_phys_addr;
 	size_t			atu_size;
 	u32			num_ib_windows;
 	u32			num_ob_windows;
@@ -421,7 +454,7 @@ struct dw_pcie {
 	u32			type;
 	unsigned long		caps;
 	int			num_lanes;
-	int			link_gen;
+	int			max_link_speed;
 	u8			n_fts[2];
 	struct dw_edma_chip	edma;
 	struct clk_bulk_data	app_clks[DW_PCIE_NUM_APP_CLKS];