Merge tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the large set of USB and Thunderbolt changes for 6.12-rc1.

  Nothing "major" in here, except for a new 9p network gadget that has
  been worked on for a long time (all of the needed acks are here)

  Other than that, it's the usual set of:

   - Thunderbolt / USB4 driver updates and additions for new hardware

   - dwc3 driver updates and new features added

   - xhci driver updates

   - typec driver updates

   - USB gadget updates and api additions to make some gadgets more
     configurable by userspace

   - dwc2 driver updates

   - usb phy driver updates

   - usbip feature additions

   - other minor USB driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'usb-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
  sub: cdns3: Use predefined PCI vendor ID constant
  sub: cdns2: Use predefined PCI vendor ID constant
  USB: misc: yurex: fix race between read and write
  USB: misc: cypress_cy7c63: check for short transfer
  USB: appledisplay: close race between probe and completion handler
  USB: class: CDC-ACM: fix race between get_serial and set_serial
  usb: r8a66597-hcd: make read-only const arrays static
  usb: typec: ucsi: Fix busy loop on ASUS VivoBooks
  usb: dwc3: rtk: Clean up error code in __get_dwc3_maximum_speed()
  usb: storage: ene_ub6250: Fix right shift warnings
  usb: roles: Improve the fix for a false positive recursive locking complaint
  locking/mutex: Introduce mutex_init_with_key()
  locking/mutex: Define mutex_init() once
  net/9p/usbg: fix CONFIG_USB_GADGET dependency
  usb: xhci: fix loss of data on Cadence xHC
  usb: xHCI: add XHCI_RESET_ON_RESUME quirk for Phytium xHCI host
  usb: dwc3: imx8mp: disable SS_CON and U3 wakeup for system sleep
  usb: dwc3: imx8mp: add 2 software managed quirk properties for host mode
  usb: host: xhci-plat: Parse xhci-missing_cas_quirk and apply quirk
  usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support
  ...

Author: torvalds

Documentation/ABI/testing/configfs-usb-gadget-acm

@@ -6,3 +6,10 @@ Description:
 		This item contains just one readonly attribute: port_num.
 		It contains the port number of the /dev/ttyGS<n> device
 		associated with acm function's instance "name".
+
+What:		/config/usb-gadget/gadget/functions/acm.name/protocol
+Date:		Aug 2024
+KernelVersion:	6.13
+Description:
+		Reported bInterfaceProtocol for the ACM device. For legacy
+		reasons, this defaults to 1 (USB_CDC_ACM_PROTO_AT_V25TER).

Documentation/ABI/testing/configfs-usb-gadget-uac1

@@ -30,4 +30,12 @@ Description:
 		req_number		the number of pre-allocated requests
 					for both capture and playback
 		function_name		name of the interface
+		p_it_name		playback input terminal name
+		p_it_ch_name		playback channels name
+		p_ot_name		playback output terminal name
+		p_fu_vol_name		playback mute/volume functional unit name
+		c_it_name		capture input terminal name
+		c_it_ch_name		capture channels name
+		c_ot_name		capture output terminal name
+		c_fu_vol_name		capture mute/volume functional unit name
 		=====================	=======================================

Documentation/ABI/testing/configfs-usb-gadget-uac2

@@ -35,6 +35,17 @@ Description:
 		req_number		the number of pre-allocated requests
 					for both capture and playback
 		function_name		name of the interface
+		if_ctrl_name		topology control name
+		clksrc_in_name		input clock name
+		clksrc_out_name		output clock name
+		p_it_name		playback input terminal name
+		p_it_ch_name		playback input first channel name
+		p_ot_name		playback output terminal name
+		p_fu_vol_name		playback mute/volume function unit name
+		c_it_name		capture input terminal name
+		c_it_ch_name		capture input first channel name
+		c_ot_name		capture output terminal name
+		c_fu_vol_name		capture mute/volume functional unit name
 		c_terminal_type		code of the capture terminal type
 		p_terminal_type		code of the playback terminal type
 		=====================	=======================================

Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml

@@ -87,6 +87,12 @@ properties:
     maximum: 119
     default: 100
 
+  nxp,sim:
+    description:
+      The system integration module (SIM) provides system control and chip
+      configuration registers.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
 required:
   - compatible
   - reg
@@ -110,6 +116,17 @@ allOf:
       required:
         - fsl,anatop
 
+  - if:
+      properties:
+        compatible:
+          const: fsl,imx7ulp-usbphy
+    then:
+      required:
+        - nxp,sim
+    else:
+      properties:
+        nxp,sim: false
+
 additionalProperties: false
 
 examples:

Documentation/devicetree/bindings/usb/fsl,ls1028a.yaml

@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,ls1028a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale layerscape SuperSpeed DWC3 USB SoC controller
+
+maintainers:
+  - Frank Li <[email protected]>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - fsl,ls1028a-dwc3
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,ls1028a-dwc3
+      - const: snps,dwc3
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: snps,dwc3.yaml#
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    usb@fe800000 {
+        compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+        reg = <0xfe800000 0x100000>;
+        interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+    };

Documentation/devicetree/bindings/usb/msm-hsusb.txt

@@ -52,6 +52,7 @@ properties:
           - qcom,sm8550-dwc3
           - qcom,sm8650-dwc3
           - qcom,x1e80100-dwc3
+          - qcom,x1e80100-dwc3-mp
       - const: qcom,dwc3
 
   reg:
@@ -289,6 +290,7 @@ allOf:
               - qcom,sc8280xp-dwc3
               - qcom,sc8280xp-dwc3-mp
               - qcom,x1e80100-dwc3
+              - qcom,x1e80100-dwc3-mp
     then:
       properties:
         clocks:
@@ -428,6 +430,21 @@ allOf:
           contains:
             enum:
               - qcom,ipq5332-dwc3
+    then:
+      properties:
+        interrupts:
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: pwr_event
+            - const: dp_hs_phy_irq
+            - const: dm_hs_phy_irq
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,x1e80100-dwc3
     then:
       properties:
@@ -486,6 +503,7 @@ allOf:
           contains:
             enum:
               - qcom,sc8180x-dwc3-mp
+              - qcom,x1e80100-dwc3-mp
     then:
       properties:
         interrupts:

Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

@@ -13,10 +13,9 @@ properties:
   compatible:
     oneOf:
       - const: ti,j721e-usb
-      - const: ti,am64-usb
       - items:
-          - const: ti,j721e-usb
           - const: ti,am64-usb
+          - const: ti,j721e-usb
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/usb/ti,j721e-usb.yaml

@@ -48,11 +48,66 @@ For server running on QEMU host with virtio transport::
 
 	mount -t 9p -o trans=virtio <mount_tag> /mnt/9
 
-where mount_tag is the tag associated by the server to each of the exported
+where mount_tag is the tag generated by the server to each of the exported
 mount points. Each 9P export is seen by the client as a virtio device with an
 associated "mount_tag" property. Available mount tags can be
 seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio<n>/mount_tag files.
 
+USBG Usage
+==========
+
+To mount a 9p FS on a USB Host accessible via the gadget at runtime::
+
+	mount -t 9p -o trans=usbg,aname=/path/to/fs <device> /mnt/9
+
+To mount a 9p FS on a USB Host accessible via the gadget as root filesystem::
+
+	root=<device> rootfstype=9p rootflags=trans=usbg,cache=loose,uname=root,access=0,dfltuid=0,dfltgid=0,aname=/path/to/rootfs
+
+where <device> is the tag associated by the usb gadget transport.
+It is defined by the configfs instance name.
+
+USBG Example
+============
+
+The USB host exports a filesystem, while the gadget on the USB device
+side makes it mountable.
+
+Diod (9pfs server) and the forwarder are on the development host, where
+the root filesystem is actually stored. The gadget is initialized during
+boot (or later) on the embedded board. Then the forwarder will find it
+on the USB bus and start forwarding requests.
+
+In this case the 9p requests come from the device and are handled by the
+host. The reason is that USB device ports are normally not available on
+PCs, so a connection in the other direction would not work.
+
+When using the usbg transport, for now there is no native usb host
+service capable to handle the requests from the gadget driver. For
+this we have to use the extra python tool p9_fwd.py from tools/usb.
+
+Just start the 9pfs capable network server like diod/nfs-ganesha e.g.::
+
+        $ diod -f -n -d 0 -S -l 0.0.0.0:9999 -e $PWD
+
+Optionaly scan your bus if there are more then one usbg gadgets to find their path::
+
+        $ python $kernel_dir/tools/usb/p9_fwd.py list
+
+        Bus | Addr | Manufacturer     | Product          | ID        | Path
+        --- | ---- | ---------------- | ---------------- | --------- | ----
+          2 |   67 | unknown          | unknown          | 1d6b:0109 | 2-1.1.2
+          2 |   68 | unknown          | unknown          | 1d6b:0109 | 2-1.1.3
+
+Then start the python transport::
+
+        $ python $kernel_dir/tools/usb/p9_fwd.py --path 2-1.1.2 connect -p 9999
+
+After that the gadget driver can be used as described above.
+
+One use-case is to use it as an alternative to NFS root booting during
+the development of embedded Linux devices.
+
 Options
 =======
 
@@ -68,6 +123,7 @@ Options
 			virtio	  connect to the next virtio channel available
 				  (from QEMU with trans_virtio module)
 			rdma	  connect to a specified RDMA channel
+			usbg	  connect to a specified usb gadget channel
 			========  ============================================
 
   uname=name	user name to attempt mount as on the remote server.  The