clk: samsung: clk-pll: Add support for pll_1418x

pll1418x is used in Exynos7885 SoC for USB PHY clock.
Operation-wise it is very similar to pll0822x, except that MDIV is only
9 bits wide instead of 10, and we use the CON1 register in the PLL
macro's "con" parameter instead of CON3 like this:

	PLL(pll_1418x, CLK_FOUT_USB_PLL, "fout_usb_pll", "oscclk",
	    PLL_LOCKTIME_PLL_USB, PLL_CON0_PLL_USB,
	    pll_usb_rate_table),

Technically the PLL should work fine with pll0822x code if the PLL
tables are correct, but it's more "correct" to actually update the mask.

Signed-off-by: David Virag <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>

Author: VDavid003

drivers/clk/samsung/clk-pll.c

@@ -430,6 +430,9 @@ static const struct clk_ops samsung_pll36xx_clk_min_ops = {
 #define PLL0822X_LOCK_STAT_SHIFT	(29)
 #define PLL0822X_ENABLE_SHIFT		(31)
 
+/* PLL1418x is similar to PLL0822x, except that MDIV is one bit smaller */
+#define PLL1418X_MDIV_MASK		(0x1FF)
+
 static unsigned long samsung_pll0822x_recalc_rate(struct clk_hw *hw,
 						  unsigned long parent_rate)
 {
@@ -438,7 +441,10 @@ static unsigned long samsung_pll0822x_recalc_rate(struct clk_hw *hw,
 	u64 fvco = parent_rate;
 
 	pll_con3 = readl_relaxed(pll->con_reg);
-	mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL0822X_MDIV_MASK;
+	if (pll->type != pll_1418x)
+		mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL0822X_MDIV_MASK;
+	else
+		mdiv = (pll_con3 >> PLL0822X_MDIV_SHIFT) & PLL1418X_MDIV_MASK;
 	pdiv = (pll_con3 >> PLL0822X_PDIV_SHIFT) & PLL0822X_PDIV_MASK;
 	sdiv = (pll_con3 >> PLL0822X_SDIV_SHIFT) & PLL0822X_SDIV_MASK;
 
@@ -456,7 +462,12 @@ static int samsung_pll0822x_set_rate(struct clk_hw *hw, unsigned long drate,
 {
 	const struct samsung_pll_rate_table *rate;
 	struct samsung_clk_pll *pll = to_clk_pll(hw);
-	u32 pll_con3;
+	u32 mdiv_mask, pll_con3;
+
+	if (pll->type != pll_1418x)
+		mdiv_mask = PLL0822X_MDIV_MASK;
+	else
+		mdiv_mask = PLL1418X_MDIV_MASK;
 
 	/* Get required rate settings from table */
 	rate = samsung_get_pll_settings(pll, drate);
@@ -468,7 +479,7 @@ static int samsung_pll0822x_set_rate(struct clk_hw *hw, unsigned long drate,
 
 	/* Change PLL PMS values */
 	pll_con3 = readl_relaxed(pll->con_reg);
-	pll_con3 &= ~((PLL0822X_MDIV_MASK << PLL0822X_MDIV_SHIFT) |
+	pll_con3 &= ~((mdiv_mask << PLL0822X_MDIV_SHIFT) |
 			(PLL0822X_PDIV_MASK << PLL0822X_PDIV_SHIFT) |
 			(PLL0822X_SDIV_MASK << PLL0822X_SDIV_SHIFT));
 	pll_con3 |= (rate->mdiv << PLL0822X_MDIV_SHIFT) |
@@ -1317,6 +1328,7 @@ static void __init _samsung_clk_register_pll(struct samsung_clk_provider *ctx,
 			init.ops = &samsung_pll35xx_clk_ops;
 		break;
 	case pll_1417x:
+	case pll_1418x:
 	case pll_0818x:
 	case pll_0822x:
 	case pll_0516x:

drivers/clk/samsung/clk-pll.h

@@ -30,6 +30,7 @@ enum samsung_pll_type {
 	pll_2650x,
 	pll_2650xx,
 	pll_1417x,
+	pll_1418x,
 	pll_1450x,
 	pll_1451x,
 	pll_1452x,