Merge tag 'qcom-pinctrl-6.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into devel

Qualcomm pinctrl Devicetree bindings changes for v6.5

Simplify remaining bindings with usage of unevaluatedProperties.  This
will have the same functional effect with less code.

Author: Linus Walleij

Documentation/devicetree/bindings/pinctrl/qcom,ipq9574-tlmm.yaml

@@ -53,6 +53,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -86,19 +87,9 @@ $defs:
                 rx0, rx1, sdc_clk, sdc_cmd, sdc_data, sdc_rclk, tsens_max,
                 wci20, wci21, wsa_swrm ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,qcm2290-tlmm.yaml

@@ -45,6 +45,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -81,19 +82,9 @@ $defs:
                 uim2_data, uim2_present, uim2_reset, usb_phy, vfr_1,
                 vsense_trigger, wlan1_adc0, wlan1_adc1 ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 allOf:
   - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
 

Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml

@@ -55,6 +55,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -104,20 +105,9 @@ $defs:
                 usb1_phy, usb1_sbrx, usb1_sbtx, usb1_usb4, usb2phy_ac,
                 vsense_trigger ]
 
-      bias-bus-hold: true
-      bias-disable: true
-      bias-pull-down: true
-      bias-pull-up: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>

Documentation/devicetree/bindings/pinctrl/qcom,sm7150-tlmm.yaml

@@ -62,6 +62,7 @@ $defs:
       Pinctrl node's client devices use subnodes for desired pin configuration.
       Client device subnodes use below standard properties.
     $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
 
     properties:
       pins:
@@ -102,19 +103,9 @@ $defs:
                 wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk,
                 wsa_data ]
 
-      bias-pull-down: true
-      bias-pull-up: true
-      bias-disable: true
-      drive-strength: true
-      input-enable: true
-      output-high: true
-      output-low: true
-
     required:
       - pins
 
-    additionalProperties: false
-
 required:
   - compatible
   - reg