clk: samsung: update PLL locktime for PLL142XX used on FSD platform

Currently PLL142XX locktime is 270. As per spec, it should be 150. Hence
update PLL142XX controller locktime to 150.

Cc: [email protected]
Fixes: 4f34600 ("clk: samsung: fsd: Add initial clock support")
Signed-off-by: Varada Pavani <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Kozlowski <[email protected]>

Author: Varada Pavani

drivers/clk/samsung/clk-pll.c

@@ -206,6 +206,7 @@ static const struct clk_ops samsung_pll3000_clk_ops = {
  */
 /* Maximum lock time can be 270 * PDIV cycles */
 #define PLL35XX_LOCK_FACTOR	(270)
+#define PLL142XX_LOCK_FACTOR	(150)
 
 #define PLL35XX_MDIV_MASK       (0x3FF)
 #define PLL35XX_PDIV_MASK       (0x3F)
@@ -272,7 +273,11 @@ static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
 	}
 
 	/* Set PLL lock time. */
-	writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR,
+	if (pll->type == pll_142xx)
+		writel_relaxed(rate->pdiv * PLL142XX_LOCK_FACTOR,
+			pll->lock_reg);
+	else
+		writel_relaxed(rate->pdiv * PLL35XX_LOCK_FACTOR,
 			pll->lock_reg);
 
 	/* Change PLL PMS values */