sched/fair: Move effective_cpu_util() and effective_cpu_util() in fair.c

Move effective_cpu_util() and sched_cpu_util() functions in fair.c file
with others utilization related functions.

No functional change.

Signed-off-by: Vincent Guittot <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]

Author: vingu-linaro

kernel/sched/fair.c

@@ -8084,6 +8084,105 @@ static unsigned long cpu_util_without(int cpu, struct task_struct *p)
 	return cpu_util(cpu, p, -1, 0);
 }
 
+/*
+ * This function computes an effective utilization for the given CPU, to be
+ * used for frequency selection given the linear relation: f = u * f_max.
+ *
+ * The scheduler tracks the following metrics:
+ *
+ *   cpu_util_{cfs,rt,dl,irq}()
+ *   cpu_bw_dl()
+ *
+ * Where the cfs,rt and dl util numbers are tracked with the same metric and
+ * synchronized windows and are thus directly comparable.
+ *
+ * The cfs,rt,dl utilization are the running times measured with rq->clock_task
+ * which excludes things like IRQ and steal-time. These latter are then accrued
+ * in the IRQ utilization.
+ *
+ * The DL bandwidth number OTOH is not a measured metric but a value computed
+ * based on the task model parameters and gives the minimal utilization
+ * required to meet deadlines.
+ */
+unsigned long effective_cpu_util(int cpu, unsigned long util_cfs,
+				 unsigned long *min,
+				 unsigned long *max)
+{
+	unsigned long util, irq, scale;
+	struct rq *rq = cpu_rq(cpu);
+
+	scale = arch_scale_cpu_capacity(cpu);
+
+	/*
+	 * Early check to see if IRQ/steal time saturates the CPU, can be
+	 * because of inaccuracies in how we track these -- see
+	 * update_irq_load_avg().
+	 */
+	irq = cpu_util_irq(rq);
+	if (unlikely(irq >= scale)) {
+		if (min)
+			*min = scale;
+		if (max)
+			*max = scale;
+		return scale;
+	}
+
+	if (min) {
+		/*
+		 * The minimum utilization returns the highest level between:
+		 * - the computed DL bandwidth needed with the IRQ pressure which
+		 *   steals time to the deadline task.
+		 * - The minimum performance requirement for CFS and/or RT.
+		 */
+		*min = max(irq + cpu_bw_dl(rq), uclamp_rq_get(rq, UCLAMP_MIN));
+
+		/*
+		 * When an RT task is runnable and uclamp is not used, we must
+		 * ensure that the task will run at maximum compute capacity.
+		 */
+		if (!uclamp_is_used() && rt_rq_is_runnable(&rq->rt))
+			*min = max(*min, scale);
+	}
+
+	/*
+	 * Because the time spend on RT/DL tasks is visible as 'lost' time to
+	 * CFS tasks and we use the same metric to track the effective
+	 * utilization (PELT windows are synchronized) we can directly add them
+	 * to obtain the CPU's actual utilization.
+	 */
+	util = util_cfs + cpu_util_rt(rq);
+	util += cpu_util_dl(rq);
+
+	/*
+	 * The maximum hint is a soft bandwidth requirement, which can be lower
+	 * than the actual utilization because of uclamp_max requirements.
+	 */
+	if (max)
+		*max = min(scale, uclamp_rq_get(rq, UCLAMP_MAX));
+
+	if (util >= scale)
+		return scale;
+
+	/*
+	 * There is still idle time; further improve the number by using the
+	 * IRQ metric. Because IRQ/steal time is hidden from the task clock we
+	 * need to scale the task numbers:
+	 *
+	 *              max - irq
+	 *   U' = irq + --------- * U
+	 *                 max
+	 */
+	util = scale_irq_capacity(util, irq, scale);
+	util += irq;
+
+	return min(scale, util);
+}
+
+unsigned long sched_cpu_util(int cpu)
+{
+	return effective_cpu_util(cpu, cpu_util_cfs(cpu), NULL, NULL);
+}
+
 /*
  * energy_env - Utilization landscape for energy estimation.
  * @task_busy_time: Utilization contribution by the task for which we test the

kernel/sched/syscalls.c

@@ -258,107 +258,6 @@ int sched_core_idle_cpu(int cpu)
 
 #endif
 
-#ifdef CONFIG_SMP
-/*
- * This function computes an effective utilization for the given CPU, to be
- * used for frequency selection given the linear relation: f = u * f_max.
- *
- * The scheduler tracks the following metrics:
- *
- *   cpu_util_{cfs,rt,dl,irq}()
- *   cpu_bw_dl()
- *
- * Where the cfs,rt and dl util numbers are tracked with the same metric and
- * synchronized windows and are thus directly comparable.
- *
- * The cfs,rt,dl utilization are the running times measured with rq->clock_task
- * which excludes things like IRQ and steal-time. These latter are then accrued
- * in the IRQ utilization.
- *
- * The DL bandwidth number OTOH is not a measured metric but a value computed
- * based on the task model parameters and gives the minimal utilization
- * required to meet deadlines.
- */
-unsigned long effective_cpu_util(int cpu, unsigned long util_cfs,
-				 unsigned long *min,
-				 unsigned long *max)
-{
-	unsigned long util, irq, scale;
-	struct rq *rq = cpu_rq(cpu);
-
-	scale = arch_scale_cpu_capacity(cpu);
-
-	/*
-	 * Early check to see if IRQ/steal time saturates the CPU, can be
-	 * because of inaccuracies in how we track these -- see
-	 * update_irq_load_avg().
-	 */
-	irq = cpu_util_irq(rq);
-	if (unlikely(irq >= scale)) {
-		if (min)
-			*min = scale;
-		if (max)
-			*max = scale;
-		return scale;
-	}
-
-	if (min) {
-		/*
-		 * The minimum utilization returns the highest level between:
-		 * - the computed DL bandwidth needed with the IRQ pressure which
-		 *   steals time to the deadline task.
-		 * - The minimum performance requirement for CFS and/or RT.
-		 */
-		*min = max(irq + cpu_bw_dl(rq), uclamp_rq_get(rq, UCLAMP_MIN));
-
-		/*
-		 * When an RT task is runnable and uclamp is not used, we must
-		 * ensure that the task will run at maximum compute capacity.
-		 */
-		if (!uclamp_is_used() && rt_rq_is_runnable(&rq->rt))
-			*min = max(*min, scale);
-	}
-
-	/*
-	 * Because the time spend on RT/DL tasks is visible as 'lost' time to
-	 * CFS tasks and we use the same metric to track the effective
-	 * utilization (PELT windows are synchronized) we can directly add them
-	 * to obtain the CPU's actual utilization.
-	 */
-	util = util_cfs + cpu_util_rt(rq);
-	util += cpu_util_dl(rq);
-
-	/*
-	 * The maximum hint is a soft bandwidth requirement, which can be lower
-	 * than the actual utilization because of uclamp_max requirements.
-	 */
-	if (max)
-		*max = min(scale, uclamp_rq_get(rq, UCLAMP_MAX));
-
-	if (util >= scale)
-		return scale;
-
-	/*
-	 * There is still idle time; further improve the number by using the
-	 * IRQ metric. Because IRQ/steal time is hidden from the task clock we
-	 * need to scale the task numbers:
-	 *
-	 *              max - irq
-	 *   U' = irq + --------- * U
-	 *                 max
-	 */
-	util = scale_irq_capacity(util, irq, scale);
-	util += irq;
-
-	return min(scale, util);
-}
-
-unsigned long sched_cpu_util(int cpu)
-{
-	return effective_cpu_util(cpu, cpu_util_cfs(cpu), NULL, NULL);
-}
-#endif /* CONFIG_SMP */
-
 /**
  * find_process_by_pid - find a process with a matching PID value.
  * @pid: the pid in question.