clk: renesas: rzg2l: Remove critical area

The spinlock in rzg2l_mod_clock_endisable() is intended to protect
RMW-accesses to the hardware register.  There is no need to protect
instructions that set temporary variables which will be written
afterwards to a hardware register.  With this only one write to one
clock register is executed thus locking/unlocking rmw_lock is removed.

Signed-off-by: Claudiu Beznea <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>

Author: claudiubeznea

drivers/clk/renesas/rzg2l-cpg.c

@@ -895,7 +895,6 @@ static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable)
 	struct rzg2l_cpg_priv *priv = clock->priv;
 	unsigned int reg = clock->off;
 	struct device *dev = priv->dev;
-	unsigned long flags;
 	u32 bitmask = BIT(clock->bit);
 	u32 value;
 	int error;
@@ -907,14 +906,12 @@ static int rzg2l_mod_clock_endisable(struct clk_hw *hw, bool enable)
 
 	dev_dbg(dev, "CLK_ON %u/%pC %s\n", CLK_ON_R(reg), hw->clk,
 		enable ? "ON" : "OFF");
-	spin_lock_irqsave(&priv->rmw_lock, flags);
 
 	value = bitmask << 16;
 	if (enable)
 		value |= bitmask;
-	writel(value, priv->base + CLK_ON_R(reg));
 
-	spin_unlock_irqrestore(&priv->rmw_lock, flags);
+	writel(value, priv->base + CLK_ON_R(reg));
 
 	if (!enable)
 		return 0;