phy: sparx5-serdes: add support for branching on chip type

In preparation for lan969x, add a way to branch out on code that is to
be executed on either Sparx5 or lan969x.  Initially, this is required to
branch out when checking the SERDES types and SERDES speeds, since the
handling of these differ on the two platforms. This will also be used by
the lan969x driver introduced in a subsequent patch.

Signed-off-by: Daniel Machon <[email protected]>
Reviewed-by: Steen Hegelund <[email protected]>
Link: https://lore.kernel.org/r/20240909-sparx5-lan969x-serdes-driver-v2-7-d695bcb57b84@microchip.com
Signed-off-by: Vinod Koul <[email protected]>

Author: Danielmachon

drivers/phy/microchip/sparx5_serdes.c

@@ -2298,10 +2298,12 @@ static int sparx5_serdes_set_speed(struct phy *phy, int speed)
 {
 	struct sparx5_serdes_macro *macro = phy_get_drvdata(phy);
 
-	if (macro->sidx < SPX5_SERDES_10G_START && speed > SPEED_5000)
-		return -EINVAL;
-	if (macro->sidx < SPX5_SERDES_25G_START && speed > SPEED_10000)
-		return -EINVAL;
+	if (macro->priv->data->type == SPX5_TARGET_SPARX5) {
+		if (macro->sidx < SPX5_SERDES_10G_START && speed > SPEED_5000)
+			return -EINVAL;
+		if (macro->sidx < SPX5_SERDES_25G_START && speed > SPEED_10000)
+			return -EINVAL;
+	}
 	if (speed != macro->speed) {
 		macro->speed = speed;
 		if (macro->serdesmode != SPX5_SD_MODE_NONE)
@@ -2338,11 +2340,14 @@ static int sparx5_serdes_validate(struct phy *phy, enum phy_mode mode,
 	if (macro->speed == 0)
 		return -EINVAL;
 
-	if (macro->sidx < SPX5_SERDES_10G_START && macro->speed > SPEED_5000)
-		return -EINVAL;
-	if (macro->sidx < SPX5_SERDES_25G_START && macro->speed > SPEED_10000)
-		return -EINVAL;
-
+	if (macro->priv->data->type == SPX5_TARGET_SPARX5) {
+		if (macro->sidx < SPX5_SERDES_10G_START &&
+		    macro->speed > SPEED_5000)
+			return -EINVAL;
+		if (macro->sidx < SPX5_SERDES_25G_START &&
+		    macro->speed > SPEED_10000)
+			return -EINVAL;
+	}
 	switch (submode) {
 	case PHY_INTERFACE_MODE_1000BASEX:
 		if (macro->speed != SPEED_100 && /* This is for 100BASE-FX */
@@ -2515,6 +2520,7 @@ static struct sparx5_serdes_io_resource sparx5_serdes_iomap[] =  {
 };
 
 static const struct sparx5_serdes_match_data sparx5_desc = {
+	.type = SPX5_TARGET_SPARX5,
 	.iomap = sparx5_serdes_iomap,
 	.iomap_size = ARRAY_SIZE(sparx5_serdes_iomap),
 	.tsize = sparx5_serdes_tsize,
@@ -2618,8 +2624,9 @@ static int sparx5_serdes_probe(struct platform_device *pdev)
 			return err;
 	}
 
-	/* Power down all CMUs by default */
-	sparx5_serdes_cmu_power_off(priv);
+	/* Power down all CMU's by default */
+	if (priv->data->type == SPX5_TARGET_SPARX5)
+		sparx5_serdes_cmu_power_off(priv);
 
 	provider = devm_of_phy_provider_register(priv->dev, sparx5_serdes_xlate);
 

drivers/phy/microchip/sparx5_serdes.h

@@ -34,6 +34,10 @@ enum sparx5_10g28cmu_mode {
 	SPX5_SD10G28_CMU_MAX,
 };
 
+enum sparx5_target {
+	SPX5_TARGET_SPARX5,
+};
+
 struct sparx5_serdes_macro {
 	struct sparx5_serdes_private *priv;
 	u32 sidx;
@@ -56,6 +60,7 @@ struct sparx5_serdes_ops {
 };
 
 struct sparx5_serdes_match_data {
+	enum sparx5_target type;
 	const struct sparx5_serdes_consts consts;
 	const struct sparx5_serdes_ops ops;
 	const struct sparx5_serdes_io_resource *iomap;