Merge tag 'ti-k3-dt-fixes-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes

Devicetree fixes for TI K3 platforms for v6.11

Critical fixes for the following:
* j784s4: Fix for McASP DMA map
* J722s/AM62p: GPIO ranges fixes
* k3-am62-verdin-dahlia: sleep-moci fixes for deep-sleep (revert)

* tag 'ti-k3-dt-fixes-for-v6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
  arm64: dts: ti: k3-j784s4-main: Correct McASP DMAs
  arm64: dts: ti: k3-j722s: Fix gpio-range for main_pmx0
  arm64: dts: ti: k3-am62p: Fix gpio-range for main_pmx0
  arm64: dts: ti: k3-am62p: Add gpio-ranges for mcu_gpio0
  arm64: dts: ti: k3-am62-verdin-dahlia: Keep CTRL_SLEEP_MOCI# regulator on
  arm64: dts: ti: k3-j784s4-evm: Consolidate serdes0 references
  arm64: dts: ti: k3-j784s4-evm: Assign only lanes 0 and 1 to PCIe1

Author: arndb

arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi

@@ -43,15 +43,6 @@
 			sound-dai = <&mcasp0>;
 		};
 	};
-
-	reg_usb_hub: regulator-usb-hub {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-		gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
-		regulator-boot-on;
-		regulator-name = "HUB_PWR_EN";
-	};
 };
 
 /* Verdin ETHs */
@@ -193,11 +184,6 @@
 	status = "okay";
 };
 
-/* Do not force CTRL_SLEEP_MOCI# always enabled */
-&reg_force_sleep_moci {
-	status = "disabled";
-};
-
 /* Verdin SD_1 */
 &sdhci1 {
 	status = "okay";
@@ -218,15 +204,7 @@
 };
 
 &usb1 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	status = "okay";
-
-	usb-hub@1 {
-		compatible = "usb424,2744";
-		reg = <1>;
-		vdd-supply = <&reg_usb_hub>;
-	};
 };
 
 /* Verdin CTRL_WAKE1_MICO# */

arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi

@@ -138,12 +138,6 @@
 		vin-supply = <&reg_1v8>;
 	};
 
-	/*
-	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
-	 * peripherals on the carrier board powered.
-	 * If more granularity or power saving is required this can be disabled
-	 * in the carrier board device tree files.
-	 */
 	reg_force_sleep_moci: regulator-force-sleep-moci {
 		compatible = "regulator-fixed";
 		enable-active-high;

arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi

@@ -146,6 +146,8 @@
 		power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 79 0>;
 		clock-names = "gpio";
+		gpio-ranges = <&mcu_pmx0 0 0 21>, <&mcu_pmx0 21 23 1>,
+			      <&mcu_pmx0 22 32 2>;
 	};
 
 	mcu_rti0: watchdog@4880000 {

arch/arm64/boot/dts/ti/k3-am62p-main.dtsi

@@ -45,7 +45,8 @@
 &main_pmx0 {
 	pinctrl-single,gpio-range =
 		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 33 92 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 72 22 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 149 2 PIN_GPIO_RANGE_IOPAD>;

arch/arm64/boot/dts/ti/k3-j722s-main.dtsi

@@ -193,7 +193,8 @@
 &main_pmx0 {
 	pinctrl-single,gpio-range =
 		<&main_pmx0_range 0 32 PIN_GPIO_RANGE_IOPAD>,
-		<&main_pmx0_range 33 55 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 33 38 PIN_GPIO_RANGE_IOPAD>,
+		<&main_pmx0_range 72 17 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 101 25 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 137 5 PIN_GPIO_RANGE_IOPAD>,
 		<&main_pmx0_range 143 3 PIN_GPIO_RANGE_IOPAD>,

arch/arm64/boot/dts/ti/k3-j784s4-evm.dts

@@ -1262,6 +1262,14 @@
 &serdes0 {
 	status = "okay";
 
+	serdes0_pcie1_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <2>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
 	serdes0_usb_link: phy@3 {
 		reg = <3>;
 		cdns,num-lanes = <1>;
@@ -1386,23 +1394,6 @@
 	phys = <&transceiver3>;
 };
 
-&serdes0 {
-	status = "okay";
-
-	serdes0_pcie1_link: phy@0 {
-		reg = <0>;
-		cdns,num-lanes = <4>;
-		#phy-cells = <0>;
-		cdns,phy-type = <PHY_TYPE_PCIE>;
-		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>,
-			 <&serdes_wiz0 3>, <&serdes_wiz0 4>;
-	};
-};
-
-&serdes_wiz0 {
-	status = "okay";
-};
-
 &pcie1_rc {
 	status = "okay";
 	num-lanes = <2>;

arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi

@@ -2755,7 +2755,7 @@
 		interrupts = <GIC_SPI 550 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
+		dmas = <&main_udmap 0xc403>, <&main_udmap 0x4403>;
 		dma-names = "tx", "rx";
 		clocks = <&k3_clks 268 0>;
 		clock-names = "fck";
@@ -2773,7 +2773,7 @@
 		interrupts = <GIC_SPI 552 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 553 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "tx", "rx";
-		dmas = <&main_udmap 0xc501>, <&main_udmap 0x4501>;
+		dmas = <&main_udmap 0xc404>, <&main_udmap 0x4404>;
 		dma-names = "tx", "rx";
 		clocks = <&k3_clks 269 0>;
 		clock-names = "fck";