drm/i915/dp: Use the generic helper to control LTTPR transparent mode

LTTPRs operating modes are defined by the DisplayPort standard and the
generic framework now provides a helper to switch between them, which
is handling the explicit disabling of non-transparent mode and its
disable->enable sequence mentioned in the DP Standard v2.0 section
3.6.6.1.

So use the new drm generic helper instead as it makes the code a bit
cleaner. Since the driver specific implementation holds the
lttrp_common_caps, if the call to the drm generic helper fails, the
lttrp_common_caps need to be updated as the helper has already rolled
back to transparent mode.

Acked-by: Imre Deak <[email protected]>
Signed-off-by: Abel Vesa <[email protected]>
Reviewed-by: Suraj Kandpal <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20250203-drm-dp-msm-add-lttpr-transparent-mode-set-v5-3-c865d0e56d6e@linaro.org
Signed-off-by: Dmitry Baryshkov <[email protected]>

Author: abelvesa

drivers/gpu/drm/i915/display/intel_dp_link_training.c

@@ -119,9 +119,6 @@ intel_dp_set_lttpr_transparent_mode(struct intel_dp *intel_dp, bool enable)
 	u8 val = enable ? DP_PHY_REPEATER_MODE_TRANSPARENT :
 			  DP_PHY_REPEATER_MODE_NON_TRANSPARENT;
 
-	if (drm_dp_dpcd_write(&intel_dp->aux, DP_PHY_REPEATER_MODE, &val, 1) != 1)
-		return false;
-
 	intel_dp->lttpr_common_caps[DP_PHY_REPEATER_MODE -
 				    DP_LT_TUNABLE_PHY_REPEATER_FIELD_DATA_STRUCTURE_REV] = val;
 
@@ -146,6 +143,7 @@ bool intel_dp_lttpr_transparent_mode_enabled(struct intel_dp *intel_dp)
 static int intel_dp_init_lttpr_phys(struct intel_dp *intel_dp, const u8 dpcd[DP_RECEIVER_CAP_SIZE])
 {
 	int lttpr_count;
+	int ret;
 
 	if (!intel_dp_read_lttpr_common_caps(intel_dp, dpcd))
 		return 0;
@@ -172,22 +170,8 @@ static int intel_dp_init_lttpr_phys(struct intel_dp *intel_dp, const u8 dpcd[DP_
 		return lttpr_count;
 	}
 
-	/*
-	 * See DP Standard v2.0 3.6.6.1. about the explicit disabling of
-	 * non-transparent mode and the disable->enable non-transparent mode
-	 * sequence.
-	 */
-	intel_dp_set_lttpr_transparent_mode(intel_dp, true);
-
-	/*
-	 * In case of unsupported number of LTTPRs or failing to switch to
-	 * non-transparent mode fall-back to transparent link training mode,
-	 * still taking into account any LTTPR common lane- rate/count limits.
-	 */
-	if (lttpr_count < 0)
-		goto out_reset_lttpr_count;
-
-	if (!intel_dp_set_lttpr_transparent_mode(intel_dp, false)) {
+	ret = drm_dp_lttpr_init(&intel_dp->aux, lttpr_count);
+	if (ret) {
 		lt_dbg(intel_dp, DP_PHY_DPRX,
 		       "Switching to LTTPR non-transparent LT mode failed, fall-back to transparent mode\n");
 
@@ -196,6 +180,8 @@ static int intel_dp_init_lttpr_phys(struct intel_dp *intel_dp, const u8 dpcd[DP_
 		goto out_reset_lttpr_count;
 	}
 
+	intel_dp_set_lttpr_transparent_mode(intel_dp, false);
+
 	return lttpr_count;
 
 out_reset_lttpr_count: