Merge tag 'pm-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These are cpufreq driver fixes addressing multiple assorted issues:

   - Fix possible out-of-bound / NULL-ptr-deref in cpufreq drivers
     (Henry Martin, Andre Przywara)

   - Fix Kconfig issues with compile-test in cpufreq drivers (Krzysztof
     Kozlowski, Johan Hovold)

   - Fix invalid return value in .get() in the CPPC cpufreq driver (Marc
     Zyngier)

   - Add SM8650 to cpufreq-dt-platdev blocklist (Pengyu Luo)"

* tag 'pm-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: fix compile-test defaults
  cpufreq: cppc: Fix invalid return value in .get() callback
  cpufreq: scpi: Fix null-ptr-deref in scpi_cpufreq_get_rate()
  cpufreq: scmi: Fix null-ptr-deref in scmi_cpufreq_get_rate()
  cpufreq: apple-soc: Fix null-ptr-deref in apple_soc_cpufreq_get_rate()
  cpufreq: Do not enable by default during compile testing
  cpufreq: Add SM8650 to cpufreq-dt-platdev blocklist
  cpufreq: sun50i: prevent out-of-bounds access

Author: torvalds

drivers/cpufreq/Kconfig.arm

@@ -76,7 +76,7 @@ config ARM_VEXPRESS_SPC_CPUFREQ
 config ARM_BRCMSTB_AVS_CPUFREQ
 	tristate "Broadcom STB AVS CPUfreq driver"
 	depends on (ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ) || COMPILE_TEST
-	default y
+	default y if ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ
 	help
 	  Some Broadcom STB SoCs use a co-processor running proprietary firmware
 	  ("AVS") to handle voltage and frequency scaling. This driver provides
@@ -88,7 +88,7 @@ config ARM_HIGHBANK_CPUFREQ
 	tristate "Calxeda Highbank-based"
 	depends on ARCH_HIGHBANK || COMPILE_TEST
 	depends on CPUFREQ_DT && REGULATOR && PL320_MBOX
-	default m
+	default m if ARCH_HIGHBANK
 	help
 	  This adds the CPUFreq driver for Calxeda Highbank SoC
 	  based boards.
@@ -133,7 +133,7 @@ config ARM_MEDIATEK_CPUFREQ
 config ARM_MEDIATEK_CPUFREQ_HW
 	tristate "MediaTek CPUFreq HW driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
-	default m
+	default m if ARCH_MEDIATEK
 	help
 	  Support for the CPUFreq HW driver.
 	  Some MediaTek chipsets have a HW engine to offload the steps
@@ -181,7 +181,7 @@ config ARM_RASPBERRYPI_CPUFREQ
 config ARM_S3C64XX_CPUFREQ
 	bool "Samsung S3C64XX"
 	depends on CPU_S3C6410 || COMPILE_TEST
-	default y
+	default CPU_S3C6410
 	help
 	  This adds the CPUFreq driver for Samsung S3C6410 SoC.
 
@@ -190,7 +190,7 @@ config ARM_S3C64XX_CPUFREQ
 config ARM_S5PV210_CPUFREQ
 	bool "Samsung S5PV210 and S5PC110"
 	depends on CPU_S5PV210 || COMPILE_TEST
-	default y
+	default CPU_S5PV210
 	help
 	  This adds the CPUFreq driver for Samsung S5PV210 and
 	  S5PC110 SoCs.
@@ -214,7 +214,7 @@ config ARM_SCMI_CPUFREQ
 config ARM_SPEAR_CPUFREQ
 	bool "SPEAr CPUFreq support"
 	depends on PLAT_SPEAR || COMPILE_TEST
-	default y
+	default PLAT_SPEAR
 	help
 	  This adds the CPUFreq driver support for SPEAr SOCs.
 
@@ -233,15 +233,15 @@ config ARM_TEGRA20_CPUFREQ
 	tristate "Tegra20/30 CPUFreq support"
 	depends on ARCH_TEGRA || COMPILE_TEST
 	depends on CPUFREQ_DT
-	default y
+	default ARCH_TEGRA
 	help
 	  This adds the CPUFreq driver support for Tegra20/30 SOCs.
 
 config ARM_TEGRA124_CPUFREQ
 	bool "Tegra124 CPUFreq support"
 	depends on ARCH_TEGRA || COMPILE_TEST
 	depends on CPUFREQ_DT
-	default y
+	default ARCH_TEGRA
 	help
 	  This adds the CPUFreq driver support for Tegra124 SOCs.
 
@@ -256,14 +256,14 @@ config ARM_TEGRA194_CPUFREQ
 	tristate "Tegra194 CPUFreq support"
 	depends on ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC || (64BIT && COMPILE_TEST)
 	depends on TEGRA_BPMP
-	default y
+	default ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC
 	help
 	  This adds CPU frequency driver support for Tegra194 SOCs.
 
 config ARM_TI_CPUFREQ
 	bool "Texas Instruments CPUFreq support"
 	depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST
-	default y
+	default ARCH_OMAP2PLUS || ARCH_K3
 	help
 	  This driver enables valid OPPs on the running platform based on
 	  values contained within the SoC in use. Enable this in order to

drivers/cpufreq/apple-soc-cpufreq.c

@@ -134,11 +134,17 @@ static const struct of_device_id apple_soc_cpufreq_of_match[] __maybe_unused = {
 
 static unsigned int apple_soc_cpufreq_get_rate(unsigned int cpu)
 {
-	struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
-	struct apple_cpu_priv *priv = policy->driver_data;
+	struct cpufreq_policy *policy;
+	struct apple_cpu_priv *priv;
 	struct cpufreq_frequency_table *p;
 	unsigned int pstate;
 
+	policy = cpufreq_cpu_get_raw(cpu);
+	if (unlikely(!policy))
+		return 0;
+
+	priv = policy->driver_data;
+
 	if (priv->info->cur_pstate_mask) {
 		u32 reg = readl_relaxed(priv->reg_base + APPLE_DVFS_STATUS);
 

drivers/cpufreq/cppc_cpufreq.c

@@ -747,7 +747,7 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
 	int ret;
 
 	if (!policy)
-		return -ENODEV;
+		return 0;
 
 	cpu_data = policy->driver_data;
 

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -175,6 +175,7 @@ static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "qcom,sm8350", },
 	{ .compatible = "qcom,sm8450", },
 	{ .compatible = "qcom,sm8550", },
+	{ .compatible = "qcom,sm8650", },
 
 	{ .compatible = "st,stih407", },
 	{ .compatible = "st,stih410", },

drivers/cpufreq/scmi-cpufreq.c

@@ -37,11 +37,17 @@ static struct cpufreq_driver scmi_cpufreq_driver;
 
 static unsigned int scmi_cpufreq_get_rate(unsigned int cpu)
 {
-	struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
-	struct scmi_data *priv = policy->driver_data;
+	struct cpufreq_policy *policy;
+	struct scmi_data *priv;
 	unsigned long rate;
 	int ret;
 
+	policy = cpufreq_cpu_get_raw(cpu);
+	if (unlikely(!policy))
+		return 0;
+
+	priv = policy->driver_data;
+
 	ret = perf_ops->freq_get(ph, priv->domain_id, &rate, false);
 	if (ret)
 		return 0;

drivers/cpufreq/scpi-cpufreq.c

@@ -29,9 +29,16 @@ static struct scpi_ops *scpi_ops;
 
 static unsigned int scpi_cpufreq_get_rate(unsigned int cpu)
 {
-	struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
-	struct scpi_data *priv = policy->driver_data;
-	unsigned long rate = clk_get_rate(priv->clk);
+	struct cpufreq_policy *policy;
+	struct scpi_data *priv;
+	unsigned long rate;
+
+	policy = cpufreq_cpu_get_raw(cpu);
+	if (unlikely(!policy))
+		return 0;
+
+	priv = policy->driver_data;
+	rate = clk_get_rate(priv->clk);
 
 	return rate / 1000;
 }

drivers/cpufreq/sun50i-cpufreq-nvmem.c

@@ -194,7 +194,9 @@ static int sun50i_cpufreq_get_efuse(void)
 	struct nvmem_cell *speedbin_nvmem;
 	const struct of_device_id *match;
 	struct device *cpu_dev;
-	u32 *speedbin;
+	void *speedbin_ptr;
+	u32 speedbin = 0;
+	size_t len;
 	int ret;
 
 	cpu_dev = get_cpu_device(0);
@@ -217,14 +219,18 @@ static int sun50i_cpufreq_get_efuse(void)
 		return dev_err_probe(cpu_dev, PTR_ERR(speedbin_nvmem),
 				     "Could not get nvmem cell\n");
 
-	speedbin = nvmem_cell_read(speedbin_nvmem, NULL);
+	speedbin_ptr = nvmem_cell_read(speedbin_nvmem, &len);
 	nvmem_cell_put(speedbin_nvmem);
-	if (IS_ERR(speedbin))
-		return PTR_ERR(speedbin);
+	if (IS_ERR(speedbin_ptr))
+		return PTR_ERR(speedbin_ptr);
 
-	ret = opp_data->efuse_xlate(*speedbin);
+	if (len <= 4)
+		memcpy(&speedbin, speedbin_ptr, len);
+	speedbin = le32_to_cpu(speedbin);
 
-	kfree(speedbin);
+	ret = opp_data->efuse_xlate(speedbin);
+
+	kfree(speedbin_ptr);
 
 	return ret;
 };