spi: add offload TX/RX streaming APIs

Most configuration of SPI offloads is handled opaquely using the offload
pointer that is passed to the various offload functions. However, there
are some offload features that need to be controlled on a per transfer
basis.

This patch adds a flag field to struct spi_transfer to allow specifying
such features. The first feature to be added is the ability to stream
data to/from a hardware sink/source rather than using a tx or rx buffer.
Additional flags can be added in the future as needed.

A flags field is also added to the offload struct for providers to
indicate which flags are supported. This allows for generic checking of
offload capabilities during __spi_validate() so that each offload
provider doesn't have to implement their own validation.

As a first users of this streaming capability, getter functions are
added to get a DMA channel that is directly connected to the offload.
Peripheral drivers will use this to get a DMA channel and configure it
to suit their needs.

Reviewed-by: Jonathan Cameron <[email protected]>
Reviewed-by: Nuno Sa <[email protected]>
Signed-off-by: David Lechner <[email protected]>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-5-e48a489be48c@baylibre.com
Signed-off-by: Mark Brown <[email protected]>

Author: dlech

drivers/spi/spi-offload.c

@@ -18,6 +18,7 @@
 
 #include <linux/cleanup.h>
 #include <linux/device.h>
+#include <linux/dmaengine.h>
 #include <linux/export.h>
 #include <linux/kref.h>
 #include <linux/list.h>
@@ -332,6 +333,75 @@ void spi_offload_trigger_disable(struct spi_offload *offload,
 }
 EXPORT_SYMBOL_GPL(spi_offload_trigger_disable);
 
+static void spi_offload_release_dma_chan(void *chan)
+{
+	dma_release_channel(chan);
+}
+
+/**
+ * devm_spi_offload_tx_stream_request_dma_chan - Get the DMA channel info for the TX stream
+ * @dev: Device for devm purposes.
+ * @offload: Offload instance
+ *
+ * This is the DMA channel that will provide data to transfers that use the
+ * %SPI_OFFLOAD_XFER_TX_STREAM offload flag.
+ *
+ * Return: Pointer to DMA channel info, or negative error code
+ */
+struct dma_chan
+*devm_spi_offload_tx_stream_request_dma_chan(struct device *dev,
+					     struct spi_offload *offload)
+{
+	struct dma_chan *chan;
+	int ret;
+
+	if (!offload->ops || !offload->ops->tx_stream_request_dma_chan)
+		return ERR_PTR(-EOPNOTSUPP);
+
+	chan = offload->ops->tx_stream_request_dma_chan(offload);
+	if (IS_ERR(chan))
+		return chan;
+
+	ret = devm_add_action_or_reset(dev, spi_offload_release_dma_chan, chan);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return chan;
+}
+EXPORT_SYMBOL_GPL(devm_spi_offload_tx_stream_request_dma_chan);
+
+/**
+ * devm_spi_offload_rx_stream_request_dma_chan - Get the DMA channel info for the RX stream
+ * @dev: Device for devm purposes.
+ * @offload: Offload instance
+ *
+ * This is the DMA channel that will receive data from transfers that use the
+ * %SPI_OFFLOAD_XFER_RX_STREAM offload flag.
+ *
+ * Return: Pointer to DMA channel info, or negative error code
+ */
+struct dma_chan
+*devm_spi_offload_rx_stream_request_dma_chan(struct device *dev,
+					     struct spi_offload *offload)
+{
+	struct dma_chan *chan;
+	int ret;
+
+	if (!offload->ops || !offload->ops->rx_stream_request_dma_chan)
+		return ERR_PTR(-EOPNOTSUPP);
+
+	chan = offload->ops->rx_stream_request_dma_chan(offload);
+	if (IS_ERR(chan))
+		return chan;
+
+	ret = devm_add_action_or_reset(dev, spi_offload_release_dma_chan, chan);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return chan;
+}
+EXPORT_SYMBOL_GPL(devm_spi_offload_rx_stream_request_dma_chan);
+
 /* Triggers providers */
 
 static void spi_offload_trigger_unregister(void *data)

drivers/spi/spi.c

@@ -31,6 +31,7 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/sched/rt.h>
 #include <linux/slab.h>
+#include <linux/spi/offload/types.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi-mem.h>
 #include <uapi/linux/sched/types.h>
@@ -4158,6 +4159,15 @@ static int __spi_validate(struct spi_device *spi, struct spi_message *message)
 
 		if (_spi_xfer_word_delay_update(xfer, spi))
 			return -EINVAL;
+
+		/* Make sure controller supports required offload features. */
+		if (xfer->offload_flags) {
+			if (!message->offload)
+				return -EINVAL;
+
+			if (xfer->offload_flags & ~message->offload->xfer_flags)
+				return -EINVAL;
+		}
 	}
 
 	message->status = -EINPROGRESS;

include/linux/spi/offload/consumer.h

@@ -31,4 +31,9 @@ int spi_offload_trigger_enable(struct spi_offload *offload,
 void spi_offload_trigger_disable(struct spi_offload *offload,
 				 struct spi_offload_trigger *trigger);
 
+struct dma_chan *devm_spi_offload_tx_stream_request_dma_chan(struct device *dev,
+							     struct spi_offload *offload);
+struct dma_chan *devm_spi_offload_rx_stream_request_dma_chan(struct device *dev,
+							     struct spi_offload *offload);
+
 #endif /* __LINUX_SPI_OFFLOAD_CONSUMER_H */

include/linux/spi/offload/types.h

@@ -11,6 +11,11 @@
 
 struct device;
 
+/* This is write xfer but TX uses external data stream rather than tx_buf. */
+#define SPI_OFFLOAD_XFER_TX_STREAM	BIT(0)
+/* This is read xfer but RX uses external data stream rather than rx_buf. */
+#define SPI_OFFLOAD_XFER_RX_STREAM	BIT(1)
+
 /* Offload can be triggered by external hardware event. */
 #define SPI_OFFLOAD_CAP_TRIGGER			BIT(0)
 /* Offload can record and then play back TX data when triggered. */
@@ -40,6 +45,8 @@ struct spi_offload {
 	void *priv;
 	/** @ops: callbacks for offload support */
 	const struct spi_offload_ops *ops;
+	/** @xfer_flags: %SPI_OFFLOAD_XFER_* flags supported by provider */
+	u32 xfer_flags;
 };
 
 enum spi_offload_trigger_type {
@@ -75,6 +82,18 @@ struct spi_offload_ops {
 	 * given offload instance.
 	 */
 	void (*trigger_disable)(struct spi_offload *offload);
+	/**
+	 * @tx_stream_request_dma_chan: Optional callback for controllers that
+	 * have an offload where the TX data stream is connected directly to a
+	 * DMA channel.
+	 */
+	struct dma_chan *(*tx_stream_request_dma_chan)(struct spi_offload *offload);
+	/**
+	 * @rx_stream_request_dma_chan: Optional callback for controllers that
+	 * have an offload where the RX data stream is connected directly to a
+	 * DMA channel.
+	 */
+	struct dma_chan *(*rx_stream_request_dma_chan)(struct spi_offload *offload);
 };
 
 #endif /* __LINUX_SPI_OFFLOAD_TYPES_H */

include/linux/spi/spi.h

@@ -1093,6 +1093,9 @@ struct spi_transfer {
 
 	u32		effective_speed_hz;
 
+	/* Use %SPI_OFFLOAD_XFER_* from spi-offload.h */
+	unsigned int	offload_flags;
+
 	unsigned int	ptp_sts_word_pre;
 	unsigned int	ptp_sts_word_post;