ALSA: hda/conexant: fix some typos

Fix some typos in patch_conexant.c

Signed-off-by: Oldherl Oh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>

Author: oldherl

sound/pci/hda/patch_conexant.c

@@ -166,18 +166,18 @@ static void cxt_init_gpio_led(struct hda_codec *codec)
 
 static void cx_fixup_headset_recog(struct hda_codec *codec)
 {
-	unsigned int mic_persent;
+	unsigned int mic_present;
 
 	/* fix some headset type recognize fail issue, such as EDIFIER headset */
-	/* set micbiasd output current comparator threshold from 66% to 55%. */
+	/* set micbias output current comparator threshold from 66% to 55%. */
 	snd_hda_codec_write(codec, 0x1c, 0, 0x320, 0x010);
-	/* set OFF voltage for DFET from -1.2V to -0.8V, set headset micbias registor
+	/* set OFF voltage for DFET from -1.2V to -0.8V, set headset micbias register
 	 * value adjustment trim from 2.2K ohms to 2.0K ohms.
 	 */
 	snd_hda_codec_write(codec, 0x1c, 0, 0x3b0, 0xe10);
 	/* fix reboot headset type recognize fail issue */
-	mic_persent = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0x0);
-	if (mic_persent & AC_PINSENSE_PRESENCE)
+	mic_present = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0x0);
+	if (mic_present & AC_PINSENSE_PRESENCE)
 		/* enable headset mic VREF */
 		snd_hda_codec_write(codec, 0x19, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24);
 	else
@@ -249,9 +249,9 @@ static void cx_update_headset_mic_vref(struct hda_codec *codec, struct hda_jack_
 {
 	unsigned int mic_present;
 
-	/* In cx8070 and sn6140, the node 16 can only be config to headphone or disabled,
-	 * the node 19 can only be config to microphone or disabled.
-	 * Check hp&mic tag to process headset pulgin&plugout.
+	/* In cx8070 and sn6140, the node 16 can only be configured to headphone or disabled,
+	 * the node 19 can only be configured to microphone or disabled.
+	 * Check hp&mic tag to process headset plugin & plugout.
 	 */
 	mic_present = snd_hda_codec_read(codec, 0x19, 0, AC_VERB_GET_PIN_SENSE, 0x0);
 	if (!(mic_present & AC_PINSENSE_PRESENCE)) /* mic plugout */