Merge branches 'fixes', 'apple/dart', 'arm/smmu/updates', 'arm/smmu/bindings', 'fsl/pamu', 'mediatek', 'renesas/ipmmu', 's390', 'intel/vt-d', 'amd/amd-vi' and 'core' into next

Author: joergroedel

Documentation/devicetree/bindings/iommu/mediatek,iommu.yaml

@@ -74,6 +74,7 @@ properties:
           - mediatek,mt2712-m4u  # generation two
           - mediatek,mt6779-m4u  # generation two
           - mediatek,mt6795-m4u  # generation two
+          - mediatek,mt6893-iommu-mm         # generation two
           - mediatek,mt8167-m4u  # generation two
           - mediatek,mt8173-m4u  # generation two
           - mediatek,mt8183-m4u  # generation two
@@ -131,6 +132,7 @@ properties:
       dt-binding/memory/mt2712-larb-port.h for mt2712,
       dt-binding/memory/mt6779-larb-port.h for mt6779,
       dt-binding/memory/mt6795-larb-port.h for mt6795,
+      dt-binding/memory/mediatek,mt6893-memory-port.h for mt6893,
       dt-binding/memory/mt8167-larb-port.h for mt8167,
       dt-binding/memory/mt8173-larb-port.h for mt8173,
       dt-binding/memory/mt8183-larb-port.h for mt8183,
@@ -157,6 +159,7 @@ allOf:
               - mediatek,mt2701-m4u
               - mediatek,mt2712-m4u
               - mediatek,mt6795-m4u
+              - mediatek,mt6893-iommu-mm
               - mediatek,mt8173-m4u
               - mediatek,mt8186-iommu-mm
               - mediatek,mt8188-iommu-vdo
@@ -173,6 +176,7 @@ allOf:
       properties:
         compatible:
           enum:
+            - mediatek,mt6893-iommu-mm
             - mediatek,mt8186-iommu-mm
             - mediatek,mt8188-iommu-vdo
             - mediatek,mt8188-iommu-vpp

arch/s390/include/asm/pci_dma.h

@@ -25,6 +25,7 @@ enum zpci_ioat_dtype {
 #define ZPCI_KEY			(PAGE_DEFAULT_KEY << 5)
 
 #define ZPCI_TABLE_SIZE_RT	(1UL << 42)
+#define ZPCI_TABLE_SIZE_RS	(1UL << 53)
 
 #define ZPCI_IOTA_STO_FLAG	(ZPCI_IOTA_IOT_ENABLED | ZPCI_KEY | ZPCI_IOTA_DT_ST)
 #define ZPCI_IOTA_RTTO_FLAG	(ZPCI_IOTA_IOT_ENABLED | ZPCI_KEY | ZPCI_IOTA_DT_RT)
@@ -55,6 +56,8 @@ enum zpci_ioat_dtype {
 #define ZPCI_PT_BITS			8
 #define ZPCI_ST_SHIFT			(ZPCI_PT_BITS + PAGE_SHIFT)
 #define ZPCI_RT_SHIFT			(ZPCI_ST_SHIFT + ZPCI_TABLE_BITS)
+#define ZPCI_RS_SHIFT			(ZPCI_RT_SHIFT + ZPCI_TABLE_BITS)
+#define ZPCI_RF_SHIFT			(ZPCI_RS_SHIFT + ZPCI_TABLE_BITS)
 
 #define ZPCI_RTE_FLAG_MASK		0x3fffUL
 #define ZPCI_RTE_ADDR_MASK		(~ZPCI_RTE_FLAG_MASK)

drivers/accel/amdxdna/aie2_pci.c

@@ -512,12 +512,6 @@ static int aie2_init(struct amdxdna_dev *xdna)
 		goto release_fw;
 	}
 
-	ret = iommu_dev_enable_feature(&pdev->dev, IOMMU_DEV_FEAT_SVA);
-	if (ret) {
-		XDNA_ERR(xdna, "Enable PASID failed, ret %d", ret);
-		goto free_irq;
-	}
-
 	psp_conf.fw_size = fw->size;
 	psp_conf.fw_buf = fw->data;
 	for (i = 0; i < PSP_MAX_REGS; i++)
@@ -526,14 +520,14 @@ static int aie2_init(struct amdxdna_dev *xdna)
 	if (!ndev->psp_hdl) {
 		XDNA_ERR(xdna, "failed to create psp");
 		ret = -ENOMEM;
-		goto disable_sva;
+		goto free_irq;
 	}
 	xdna->dev_handle = ndev;
 
 	ret = aie2_hw_start(xdna);
 	if (ret) {
 		XDNA_ERR(xdna, "start npu failed, ret %d", ret);
-		goto disable_sva;
+		goto free_irq;
 	}
 
 	ret = aie2_mgmt_fw_query(ndev);
@@ -584,8 +578,6 @@ static int aie2_init(struct amdxdna_dev *xdna)
 	aie2_error_async_events_free(ndev);
 stop_hw:
 	aie2_hw_stop(xdna);
-disable_sva:
-	iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_SVA);
 free_irq:
 	pci_free_irq_vectors(pdev);
 release_fw:
@@ -601,7 +593,6 @@ static void aie2_fini(struct amdxdna_dev *xdna)
 
 	aie2_hw_stop(xdna);
 	aie2_error_async_events_free(ndev);
-	iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_SVA);
 	pci_free_irq_vectors(pdev);
 }
 

drivers/dma/idxd/init.c

@@ -702,27 +702,6 @@ static void idxd_disable_system_pasid(struct idxd_device *idxd)
 	idxd->pasid = IOMMU_PASID_INVALID;
 }
 
-static int idxd_enable_sva(struct pci_dev *pdev)
-{
-	int ret;
-
-	ret = iommu_dev_enable_feature(&pdev->dev, IOMMU_DEV_FEAT_IOPF);
-	if (ret)
-		return ret;
-
-	ret = iommu_dev_enable_feature(&pdev->dev, IOMMU_DEV_FEAT_SVA);
-	if (ret)
-		iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_IOPF);
-
-	return ret;
-}
-
-static void idxd_disable_sva(struct pci_dev *pdev)
-{
-	iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_SVA);
-	iommu_dev_disable_feature(&pdev->dev, IOMMU_DEV_FEAT_IOPF);
-}
-
 static int idxd_probe(struct idxd_device *idxd)
 {
 	struct pci_dev *pdev = idxd->pdev;
@@ -737,17 +716,13 @@ static int idxd_probe(struct idxd_device *idxd)
 	dev_dbg(dev, "IDXD reset complete\n");
 
 	if (IS_ENABLED(CONFIG_INTEL_IDXD_SVM) && sva) {
-		if (idxd_enable_sva(pdev)) {
-			dev_warn(dev, "Unable to turn on user SVA feature.\n");
-		} else {
-			set_bit(IDXD_FLAG_USER_PASID_ENABLED, &idxd->flags);
+		set_bit(IDXD_FLAG_USER_PASID_ENABLED, &idxd->flags);
 
-			rc = idxd_enable_system_pasid(idxd);
-			if (rc)
-				dev_warn(dev, "No in-kernel DMA with PASID. %d\n", rc);
-			else
-				set_bit(IDXD_FLAG_PASID_ENABLED, &idxd->flags);
-		}
+		rc = idxd_enable_system_pasid(idxd);
+		if (rc)
+			dev_warn(dev, "No in-kernel DMA with PASID. %d\n", rc);
+		else
+			set_bit(IDXD_FLAG_PASID_ENABLED, &idxd->flags);
 	} else if (!sva) {
 		dev_warn(dev, "User forced SVA off via module param.\n");
 	}
@@ -785,8 +760,6 @@ static int idxd_probe(struct idxd_device *idxd)
  err:
 	if (device_pasid_enabled(idxd))
 		idxd_disable_system_pasid(idxd);
-	if (device_user_pasid_enabled(idxd))
-		idxd_disable_sva(pdev);
 	return rc;
 }
 
@@ -797,8 +770,6 @@ static void idxd_cleanup(struct idxd_device *idxd)
 	idxd_cleanup_internals(idxd);
 	if (device_pasid_enabled(idxd))
 		idxd_disable_system_pasid(idxd);
-	if (device_user_pasid_enabled(idxd))
-		idxd_disable_sva(idxd->pdev);
 }
 
 /*

drivers/iommu/Kconfig

@@ -192,14 +192,14 @@ config MSM_IOMMU
 	  If unsure, say N here.
 
 source "drivers/iommu/amd/Kconfig"
+source "drivers/iommu/arm/Kconfig"
 source "drivers/iommu/intel/Kconfig"
 source "drivers/iommu/iommufd/Kconfig"
 source "drivers/iommu/riscv/Kconfig"
 
 config IRQ_REMAP
 	bool "Support for Interrupt Remapping"
 	depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI
-	select DMAR_TABLE if INTEL_IOMMU
 	help
 	  Supports Interrupt remapping for IO-APIC and MSI devices.
 	  To use x2apic mode in the CPU's which support x2APIC enhancements or
@@ -314,150 +314,6 @@ config APPLE_DART
 
 	  Say Y here if you are using an Apple SoC.
 
-# ARM IOMMU support
-config ARM_SMMU
-	tristate "ARM Ltd. System MMU (SMMU) Support"
-	depends on ARM64 || ARM || COMPILE_TEST
-	depends on !GENERIC_ATOMIC64	# for IOMMU_IO_PGTABLE_LPAE
-	select IOMMU_API
-	select IOMMU_IO_PGTABLE_LPAE
-	select ARM_DMA_USE_IOMMU if ARM
-	help
-	  Support for implementations of the ARM System MMU architecture
-	  versions 1 and 2.
-
-	  Say Y here if your SoC includes an IOMMU device implementing
-	  the ARM SMMU architecture.
-
-config ARM_SMMU_LEGACY_DT_BINDINGS
-	bool "Support the legacy \"mmu-masters\" devicetree bindings"
-	depends on ARM_SMMU=y && OF
-	help
-	  Support for the badly designed and deprecated "mmu-masters"
-	  devicetree bindings. This allows some DMA masters to attach
-	  to the SMMU but does not provide any support via the DMA API.
-	  If you're lucky, you might be able to get VFIO up and running.
-
-	  If you say Y here then you'll make me very sad. Instead, say N
-	  and move your firmware to the utopian future that was 2016.
-
-config ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT
-	bool "Default to disabling bypass on ARM SMMU v1 and v2"
-	depends on ARM_SMMU
-	default y
-	help
-	  Say Y here to (by default) disable bypass streams such that
-	  incoming transactions from devices that are not attached to
-	  an iommu domain will report an abort back to the device and
-	  will not be allowed to pass through the SMMU.
-
-	  Any old kernels that existed before this KConfig was
-	  introduced would default to _allowing_ bypass (AKA the
-	  equivalent of NO for this config).  However the default for
-	  this option is YES because the old behavior is insecure.
-
-	  There are few reasons to allow unmatched stream bypass, and
-	  even fewer good ones.  If saying YES here breaks your board
-	  you should work on fixing your board.  This KConfig option
-	  is expected to be removed in the future and we'll simply
-	  hardcode the bypass disable in the code.
-
-	  NOTE: the kernel command line parameter
-	  'arm-smmu.disable_bypass' will continue to override this
-	  config.
-
-config ARM_SMMU_MMU_500_CPRE_ERRATA
-	bool "Enable errata workaround for CPRE in SMMU reset path"
-	depends on ARM_SMMU
-	default y
-	help
-	  Say Y here (by default) to apply workaround to disable
-	  MMU-500's next-page prefetcher for sake of 4 known errata.
-
-	  Say N here only when it is sure that any errata related to
-	  prefetch enablement are not applicable on the platform.
-	  Refer silicon-errata.rst for info on errata IDs.
-
-config ARM_SMMU_QCOM
-	def_tristate y
-	depends on ARM_SMMU && ARCH_QCOM
-	select QCOM_SCM
-	help
-	  When running on a Qualcomm platform that has the custom variant
-	  of the ARM SMMU, this needs to be built into the SMMU driver.
-
-config ARM_SMMU_QCOM_DEBUG
-	bool "ARM SMMU QCOM implementation defined debug support"
-	depends on ARM_SMMU_QCOM=y
-	help
-	  Support for implementation specific debug features in ARM SMMU
-	  hardware found in QTI platforms. This include support for
-	  the Translation Buffer Units (TBU) that can be used to obtain
-	  additional information when debugging memory management issues
-	  like context faults.
-
-	  Say Y here to enable debug for issues such as context faults
-	  or TLB sync timeouts which requires implementation defined
-	  register dumps.
-
-config ARM_SMMU_V3
-	tristate "ARM Ltd. System MMU Version 3 (SMMUv3) Support"
-	depends on ARM64
-	select IOMMU_API
-	select IOMMU_IO_PGTABLE_LPAE
-	select GENERIC_MSI_IRQ
-	select IOMMUFD_DRIVER if IOMMUFD
-	help
-	  Support for implementations of the ARM System MMU architecture
-	  version 3 providing translation support to a PCIe root complex.
-
-	  Say Y here if your system includes an IOMMU device implementing
-	  the ARM SMMUv3 architecture.
-
-if ARM_SMMU_V3
-config ARM_SMMU_V3_SVA
-	bool "Shared Virtual Addressing support for the ARM SMMUv3"
-	select IOMMU_SVA
-	select IOMMU_IOPF
-	select MMU_NOTIFIER
-	help
-	  Support for sharing process address spaces with devices using the
-	  SMMUv3.
-
-	  Say Y here if your system supports SVA extensions such as PCIe PASID
-	  and PRI.
-
-config ARM_SMMU_V3_IOMMUFD
-	bool "Enable IOMMUFD features for ARM SMMUv3 (EXPERIMENTAL)"
-	depends on IOMMUFD
-	help
-	  Support for IOMMUFD features intended to support virtual machines
-	  with accelerated virtual IOMMUs.
-
-	  Say Y here if you are doing development and testing on this feature.
-
-config ARM_SMMU_V3_KUNIT_TEST
-	tristate "KUnit tests for arm-smmu-v3 driver"  if !KUNIT_ALL_TESTS
-	depends on KUNIT
-	depends on ARM_SMMU_V3_SVA
-	default KUNIT_ALL_TESTS
-	help
-	  Enable this option to unit-test arm-smmu-v3 driver functions.
-
-	  If unsure, say N.
-
-config TEGRA241_CMDQV
-	bool "NVIDIA Tegra241 CMDQ-V extension support for ARM SMMUv3"
-	depends on ACPI
-	help
-	  Support for NVIDIA CMDQ-Virtualization extension for ARM SMMUv3. The
-	  CMDQ-V extension is similar to v3.3 ECMDQ for multi command queues
-	  support, except with virtualization capabilities.
-
-	  Say Y here if your system is NVIDIA Tegra241 (Grace) or it has the same
-	  CMDQ-V extension.
-endif
-
 config S390_IOMMU
 	def_bool y if S390 && PCI
 	depends on S390 && PCI
@@ -494,18 +350,6 @@ config MTK_IOMMU_V1
 
 	  if unsure, say N here.
 
-config QCOM_IOMMU
-	# Note: iommu drivers cannot (yet?) be built as modules
-	bool "Qualcomm IOMMU Support"
-	depends on ARCH_QCOM || COMPILE_TEST
-	depends on !GENERIC_ATOMIC64	# for IOMMU_IO_PGTABLE_LPAE
-	select QCOM_SCM
-	select IOMMU_API
-	select IOMMU_IO_PGTABLE_LPAE
-	select ARM_DMA_USE_IOMMU
-	help
-	  Support for IOMMU on certain Qualcomm SoCs.
-
 config HYPERV_IOMMU
 	bool "Hyper-V IRQ Handling"
 	depends on HYPERV && X86

drivers/iommu/Makefile

@@ -1,6 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-y += amd/ intel/ arm/ iommufd/ riscv/
+obj-y += arm/ iommufd/
+obj-$(CONFIG_AMD_IOMMU) += amd/
+obj-$(CONFIG_INTEL_IOMMU) += intel/
+obj-$(CONFIG_RISCV_IOMMU) += riscv/
 obj-$(CONFIG_IOMMU_API) += iommu.o
+obj-$(CONFIG_IOMMU_SUPPORT) += iommu-pages.o
 obj-$(CONFIG_IOMMU_API) += iommu-traces.o
 obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
 obj-$(CONFIG_IOMMU_DEBUGFS) += iommu-debugfs.o

drivers/iommu/amd/Makefile

@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_AMD_IOMMU) += iommu.o init.o quirks.o io_pgtable.o io_pgtable_v2.o ppr.o pasid.o
+obj-y += iommu.o init.o quirks.o io_pgtable.o io_pgtable_v2.o ppr.o pasid.o
 obj-$(CONFIG_AMD_IOMMU_DEBUGFS) += debugfs.o

drivers/iommu/amd/amd_iommu.h

@@ -147,6 +147,8 @@ static inline int get_pci_sbdf_id(struct pci_dev *pdev)
 	return PCI_SEG_DEVID_TO_SBDF(seg, devid);
 }
 
+bool amd_iommu_ht_range_ignore(void);
+
 /*
  * This must be called after device probe completes. During probe
  * use rlookup_amd_iommu() get the iommu.