net: phy: mediatek: Add Airoha AN7583 PHY support

Add Airoha AN7583 PHY support based on Airoha AN7581 with the small
difference that BMCR_PDOWN is enabled by default and needs to be cleared
to make the internal PHY correctly work.

Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Author: Ansuel

drivers/net/phy/mediatek/mtk-ge-soc.c

@@ -17,6 +17,7 @@
 #define MTK_GPHY_ID_MT7981			0x03a29461
 #define MTK_GPHY_ID_MT7988			0x03a29481
 #define MTK_GPHY_ID_AN7581			0x03a294c1
+#define MTK_GPHY_ID_AN7583			0xc0ff0420
 
 #define MTK_EXT_PAGE_ACCESS			0x1f
 #define MTK_PHY_PAGE_STANDARD			0x0000
@@ -1463,6 +1464,12 @@ static int an7581_phy_led_polarity_set(struct phy_device *phydev, int index,
 			      MTK_PHY_LED_ON_POLARITY, val);
 }
 
+static int an7583_phy_config_init(struct phy_device *phydev)
+{
+	/* BMCR_PDOWN is enabled by default */
+	return phy_clear_bits(phydev, MII_BMCR, BMCR_PDOWN);
+}
+
 static struct phy_driver mtk_socphy_driver[] = {
 	{
 		PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
@@ -1509,6 +1516,18 @@ static struct phy_driver mtk_socphy_driver[] = {
 		.led_hw_control_get = mt798x_phy_led_hw_control_get,
 		.led_polarity_set = an7581_phy_led_polarity_set,
 	},
+	{
+		PHY_ID_MATCH_EXACT(MTK_GPHY_ID_AN7583),
+		.name		= "Airoha AN7583 PHY",
+		.config_init	= an7583_phy_config_init,
+		.probe		= an7581_phy_probe,
+		.led_blink_set	= mt798x_phy_led_blink_set,
+		.led_brightness_set = mt798x_phy_led_brightness_set,
+		.led_hw_is_supported = mt798x_phy_led_hw_is_supported,
+		.led_hw_control_set = mt798x_phy_led_hw_control_set,
+		.led_hw_control_get = mt798x_phy_led_hw_control_get,
+		.led_polarity_set = an7581_phy_led_polarity_set,
+	},
 };
 
 module_phy_driver(mtk_socphy_driver);
@@ -1517,6 +1536,7 @@ static const struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
 	{ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
 	{ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
 	{ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_AN7581) },
+	{ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_AN7583) },
 	{ }
 };