Merge back earlier thermal core changes for v6.10.

Author: rafaeljw

drivers/thermal/gov_bang_bang.c

@@ -13,60 +13,11 @@
 
 #include "thermal_core.h"
 
-static int thermal_zone_trip_update(struct thermal_zone_device *tz,
-				    const struct thermal_trip *trip)
-{
-	int trip_index = thermal_zone_trip_id(tz, trip);
-	struct thermal_instance *instance;
-
-	if (!trip->hysteresis)
-		dev_info_once(&tz->device,
-			      "Zero hysteresis value for thermal zone %s\n", tz->type);
-
-	dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n",
-				trip_index, trip->temperature, tz->temperature,
-				trip->hysteresis);
-
-	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
-		if (instance->trip != trip)
-			continue;
-
-		/* in case fan is in initial state, switch the fan off */
-		if (instance->target == THERMAL_NO_TARGET)
-			instance->target = 0;
-
-		/* in case fan is neither on nor off set the fan to active */
-		if (instance->target != 0 && instance->target != 1) {
-			pr_warn("Thermal instance %s controlled by bang-bang has unexpected state: %ld\n",
-					instance->name, instance->target);
-			instance->target = 1;
-		}
-
-		/*
-		 * enable fan when temperature exceeds trip_temp and disable
-		 * the fan in case it falls below trip_temp minus hysteresis
-		 */
-		if (instance->target == 0 && tz->temperature >= trip->temperature)
-			instance->target = 1;
-		else if (instance->target == 1 &&
-			 tz->temperature < trip->temperature - trip->hysteresis)
-			instance->target = 0;
-
-		dev_dbg(&instance->cdev->device, "target=%d\n",
-					(int)instance->target);
-
-		mutex_lock(&instance->cdev->lock);
-		instance->cdev->updated = false; /* cdev needs update */
-		mutex_unlock(&instance->cdev->lock);
-	}
-
-	return 0;
-}
-
 /**
  * bang_bang_control - controls devices associated with the given zone
  * @tz: thermal_zone_device
  * @trip: the trip point
+ * @crossed_up: whether or not the trip has been crossed on the way up
  *
  * Regulation Logic: a two point regulation, deliver cooling state depending
  * on the previous state shown in this diagram:
@@ -90,26 +41,54 @@ static int thermal_zone_trip_update(struct thermal_zone_device *tz,
  *     (trip_temp - hyst) so that the fan gets turned off again.
  *
  */
-static int bang_bang_control(struct thermal_zone_device *tz,
-			     const struct thermal_trip *trip)
+static void bang_bang_control(struct thermal_zone_device *tz,
+			      const struct thermal_trip *trip,
+			      bool crossed_up)
 {
 	struct thermal_instance *instance;
-	int ret;
 
 	lockdep_assert_held(&tz->lock);
 
-	ret = thermal_zone_trip_update(tz, trip);
-	if (ret)
-		return ret;
+	dev_dbg(&tz->device, "Trip%d[temp=%d]:temp=%d:hyst=%d\n",
+		thermal_zone_trip_id(tz, trip), trip->temperature,
+		tz->temperature, trip->hysteresis);
+
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+		if (instance->trip != trip)
+			continue;
+
+		if (instance->target == THERMAL_NO_TARGET)
+			instance->target = 0;
+
+		if (instance->target != 0 && instance->target != 1) {
+			pr_debug("Unexpected state %ld of thermal instance %s in bang-bang\n",
+				 instance->target, instance->name);
+
+			instance->target = 1;
+		}
+
+		/*
+		 * Enable the fan when the trip is crossed on the way up and
+		 * disable it when the trip is crossed on the way down.
+		 */
+		if (instance->target == 0 && crossed_up)
+			instance->target = 1;
+		else if (instance->target == 1 && !crossed_up)
+			instance->target = 0;
+
+		dev_dbg(&instance->cdev->device, "target=%ld\n", instance->target);
+
+		mutex_lock(&instance->cdev->lock);
+		instance->cdev->updated = false; /* cdev needs update */
+		mutex_unlock(&instance->cdev->lock);
+	}
 
 	list_for_each_entry(instance, &tz->thermal_instances, tz_node)
 		thermal_cdev_update(instance->cdev);
-
-	return 0;
 }
 
 static struct thermal_governor thermal_gov_bang_bang = {
 	.name		= "bang_bang",
-	.throttle	= bang_bang_control,
+	.trip_crossed	= bang_bang_control,
 };
 THERMAL_GOVERNOR_DECLARE(thermal_gov_bang_bang);

drivers/thermal/gov_fair_share.c

@@ -17,97 +17,111 @@
 
 static int get_trip_level(struct thermal_zone_device *tz)
 {
-	const struct thermal_trip *trip, *level_trip = NULL;
+	const struct thermal_trip_desc *level_td = NULL;
+	const struct thermal_trip_desc *td;
 	int trip_level = -1;
 
-	for_each_trip(tz, trip) {
-		if (trip->temperature >= tz->temperature)
+	for_each_trip_desc(tz, td) {
+		if (td->threshold > tz->temperature)
 			continue;
 
 		trip_level++;
 
-		if (!level_trip || trip->temperature > level_trip->temperature)
-			level_trip = trip;
+		if (!level_td || td->threshold > level_td->threshold)
+			level_td = td;
 	}
 
 	/*  Bail out if the temperature is not greater than any trips. */
 	if (trip_level < 0)
 		return 0;
 
-	trace_thermal_zone_trip(tz, thermal_zone_trip_id(tz, level_trip),
-				level_trip->type);
+	trace_thermal_zone_trip(tz, thermal_zone_trip_id(tz, &level_td->trip),
+				level_td->trip.type);
 
 	return trip_level;
 }
 
-static long get_target_state(struct thermal_zone_device *tz,
-		struct thermal_cooling_device *cdev, int percentage, int level)
-{
-	return (long)(percentage * level * cdev->max_state) / (100 * tz->num_trips);
-}
-
 /**
  * fair_share_throttle - throttles devices associated with the given zone
  * @tz: thermal_zone_device
  * @trip: trip point
+ * @trip_level: number of trips crossed by the zone temperature
  *
  * Throttling Logic: This uses three parameters to calculate the new
  * throttle state of the cooling devices associated with the given zone.
  *
  * Parameters used for Throttling:
  * P1. max_state: Maximum throttle state exposed by the cooling device.
- * P2. percentage[i]/100:
+ * P2. weight[i]/total_weight:
  *	How 'effective' the 'i'th device is, in cooling the given zone.
- * P3. cur_trip_level/max_no_of_trips:
+ * P3. trip_level/max_no_of_trips:
  *	This describes the extent to which the devices should be throttled.
  *	We do not want to throttle too much when we trip a lower temperature,
  *	whereas the throttling is at full swing if we trip critical levels.
- *	(Heavily assumes the trip points are in ascending order)
  * new_state of cooling device = P3 * P2 * P1
  */
-static int fair_share_throttle(struct thermal_zone_device *tz,
-			       const struct thermal_trip *trip)
+static void fair_share_throttle(struct thermal_zone_device *tz,
+				const struct thermal_trip *trip,
+				int trip_level)
 {
 	struct thermal_instance *instance;
 	int total_weight = 0;
-	int total_instance = 0;
-	int cur_trip_level = get_trip_level(tz);
-
-	lockdep_assert_held(&tz->lock);
+	int nr_instances = 0;
 
 	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
 		if (instance->trip != trip)
 			continue;
 
 		total_weight += instance->weight;
-		total_instance++;
+		nr_instances++;
 	}
 
 	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
-		int percentage;
 		struct thermal_cooling_device *cdev = instance->cdev;
+		u64 dividend;
+		u32 divisor;
 
 		if (instance->trip != trip)
 			continue;
 
-		if (!total_weight)
-			percentage = 100 / total_instance;
-		else
-			percentage = (instance->weight * 100) / total_weight;
-
-		instance->target = get_target_state(tz, cdev, percentage,
-						    cur_trip_level);
+		dividend = trip_level;
+		dividend *= cdev->max_state;
+		divisor = tz->num_trips;
+		if (total_weight) {
+			dividend *= instance->weight;
+			divisor *= total_weight;
+		} else {
+			divisor *= nr_instances;
+		}
+		instance->target = div_u64(dividend, divisor);
 
 		mutex_lock(&cdev->lock);
 		__thermal_cdev_update(cdev);
 		mutex_unlock(&cdev->lock);
 	}
+}
 
-	return 0;
+static void fair_share_manage(struct thermal_zone_device *tz)
+{
+	int trip_level = get_trip_level(tz);
+	const struct thermal_trip_desc *td;
+
+	lockdep_assert_held(&tz->lock);
+
+	for_each_trip_desc(tz, td) {
+		const struct thermal_trip *trip = &td->trip;
+
+		if (trip->temperature == THERMAL_TEMP_INVALID ||
+		    trip->type == THERMAL_TRIP_CRITICAL ||
+		    trip->type == THERMAL_TRIP_HOT)
+			continue;
+
+		fair_share_throttle(tz, trip, trip_level);
+	}
 }
 
 static struct thermal_governor thermal_gov_fair_share = {
-	.name		= "fair_share",
-	.throttle	= fair_share_throttle,
+	.name	= "fair_share",
+	.manage	= fair_share_manage,
 };
 THERMAL_GOVERNOR_DECLARE(thermal_gov_fair_share);

drivers/thermal/gov_power_allocator.c

@@ -395,7 +395,7 @@ static void divvy_up_power(struct power_actor *power, int num_actors,
 	}
 }
 
-static int allocate_power(struct thermal_zone_device *tz, int control_temp)
+static void allocate_power(struct thermal_zone_device *tz, int control_temp)
 {
 	struct power_allocator_params *params = tz->governor_data;
 	unsigned int num_actors = params->num_actors;
@@ -410,7 +410,7 @@ static int allocate_power(struct thermal_zone_device *tz, int control_temp)
 	int i = 0, ret;
 
 	if (!num_actors)
-		return -ENODEV;
+		return;
 
 	/* Clean all buffers for new power estimations */
 	memset(power, 0, params->buffer_size);
@@ -471,8 +471,6 @@ static int allocate_power(struct thermal_zone_device *tz, int control_temp)
 				      num_actors, power_range,
 				      max_allocatable_power, tz->temperature,
 				      control_temp - tz->temperature);
-
-	return 0;
 }
 
 /**
@@ -496,9 +494,11 @@ static void get_governor_trips(struct thermal_zone_device *tz,
 	const struct thermal_trip *first_passive = NULL;
 	const struct thermal_trip *last_passive = NULL;
 	const struct thermal_trip *last_active = NULL;
-	const struct thermal_trip *trip;
+	const struct thermal_trip_desc *td;
+
+	for_each_trip_desc(tz, td) {
+		const struct thermal_trip *trip = &td->trip;
 
-	for_each_trip(tz, trip) {
 		switch (trip->type) {
 		case THERMAL_TRIP_PASSIVE:
 			if (!first_passive) {
@@ -743,40 +743,29 @@ static void power_allocator_unbind(struct thermal_zone_device *tz)
 	tz->governor_data = NULL;
 }
 
-static int power_allocator_throttle(struct thermal_zone_device *tz,
-				    const struct thermal_trip *trip)
+static void power_allocator_manage(struct thermal_zone_device *tz)
 {
 	struct power_allocator_params *params = tz->governor_data;
-	bool update;
+	const struct thermal_trip *trip = params->trip_switch_on;
 
 	lockdep_assert_held(&tz->lock);
 
-	/*
-	 * We get called for every trip point but we only need to do
-	 * our calculations once
-	 */
-	if (trip != params->trip_max)
-		return 0;
-
-	trip = params->trip_switch_on;
 	if (trip && tz->temperature < trip->temperature) {
-		update = tz->passive;
-		tz->passive = 0;
 		reset_pid_controller(params);
-		allow_maximum_power(tz, update);
-		return 0;
+		allow_maximum_power(tz, tz->passive);
+		tz->passive = 0;
+		return;
 	}
 
+	allocate_power(tz, params->trip_max->temperature);
 	tz->passive = 1;
-
-	return allocate_power(tz, params->trip_max->temperature);
 }
 
 static struct thermal_governor thermal_gov_power_allocator = {
 	.name		= "power_allocator",
 	.bind_to_tz	= power_allocator_bind,
 	.unbind_from_tz	= power_allocator_unbind,
-	.throttle	= power_allocator_throttle,
+	.manage		= power_allocator_manage,
 	.update_tz	= power_allocator_update_tz,
 };
 THERMAL_GOVERNOR_DECLARE(thermal_gov_power_allocator);