Merge tag 'i2c-host-fixes-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

i2c-host-fixes for v6.15-rc5

- imx-lpi2c: fix error handling sequence in probe

Author: Wolfram Sang

Documentation/admin-guide/xfs.rst

@@ -562,7 +562,7 @@ The interesting knobs for XFS workqueues are as follows:
 Zoned Filesystems
 =================
 
-For zoned file systems, the following attribute is exposed in:
+For zoned file systems, the following attributes are exposed in:
 
   /sys/fs/xfs/<dev>/zoned/
 
@@ -572,23 +572,10 @@ For zoned file systems, the following attribute is exposed in:
 	is limited by the capabilities of the backing zoned device, file system
 	size and the max_open_zones mount option.
 
-Zoned Filesystems
-=================
-
-For zoned file systems, the following attributes are exposed in:
-
- /sys/fs/xfs/<dev>/zoned/
-
- max_open_zones                 (Min:  1  Default:  Varies  Max:  UINTMAX)
-        This read-only attribute exposes the maximum number of open zones
-        available for data placement. The value is determined at mount time and
-        is limited by the capabilities of the backing zoned device, file system
-        size and the max_open_zones mount option.
-
- zonegc_low_space               (Min:  0  Default:  0  Max:  100)
-        Define a percentage for how much of the unused space that GC should keep
-        available for writing. A high value will reclaim more of the space
-        occupied by unused blocks, creating a larger buffer against write
-        bursts at the cost of increased write amplification.  Regardless
-        of this value, garbage collection will always aim to free a minimum
-        amount of blocks to keep max_open_zones open for data placement purposes.
+  zonegc_low_space		(Min:  0  Default:  0  Max:  100)
+	Define a percentage for how much of the unused space that GC should keep
+	available for writing. A high value will reclaim more of the space
+	occupied by unused blocks, creating a larger buffer against write
+	bursts at the cost of increased write amplification.  Regardless
+	of this value, garbage collection will always aim to free a minimum
+	amount of blocks to keep max_open_zones open for data placement purposes.

Documentation/arch/openrisc/openrisc_port.rst

@@ -7,10 +7,10 @@ target architecture, specifically, is the 32-bit OpenRISC 1000 family (or1k).
 
 For information about OpenRISC processors and ongoing development:
 
-	=======		=============================
+	=======		==============================
 	website		https://openrisc.io
-	email		openrisc@lists.librecores.org
-	=======		=============================
+	email		linux-openrisc@vger.kernel.org
+	=======		==============================
 
 ---------------------------------------------------------------------
 
@@ -27,11 +27,11 @@ Toolchain binaries can be obtained from openrisc.io or our github releases page.
 Instructions for building the different toolchains can be found on openrisc.io
 or Stafford's toolchain build and release scripts.
 
-	==========	=================================================
-	binaries	https://github.com/openrisc/or1k-gcc/releases
+	==========	==========================================================
+	binaries	https://github.com/stffrdhrn/or1k-toolchain-build/releases
 	toolchains	https://openrisc.io/software
 	building	https://github.com/stffrdhrn/or1k-toolchain-build
-	==========	=================================================
+	==========	==========================================================
 
 2) Building
 

Documentation/bpf/bpf_devel_QA.rst

@@ -382,6 +382,14 @@ In case of new BPF instructions, once the changes have been accepted
 into the Linux kernel, please implement support into LLVM's BPF back
 end. See LLVM_ section below for further information.
 
+Q: What "BPF_INTERNAL" symbol namespace is for?
+-----------------------------------------------
+A: Symbols exported as BPF_INTERNAL can only be used by BPF infrastructure
+like preload kernel modules with light skeleton. Most symbols outside
+of BPF_INTERNAL are not expected to be used by code outside of BPF either.
+Symbols may lack the designation because they predate the namespaces,
+or due to an oversight.
+
 Stable submission
 =================
 

Documentation/devicetree/bindings/nvmem/layouts/fixed-cell.yaml

@@ -27,7 +27,7 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
       - minimum: 0
-        maximum: 7
+        maximum: 31
         description:
           Offset in bit within the address range specified by reg.
       - minimum: 1

Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml

@@ -19,6 +19,7 @@ properties:
       - enum:
           - qcom,apq8064-qfprom
           - qcom,apq8084-qfprom
+          - qcom,ipq5018-qfprom
           - qcom,ipq5332-qfprom
           - qcom,ipq5424-qfprom
           - qcom,ipq6018-qfprom
@@ -28,6 +29,8 @@ properties:
           - qcom,msm8226-qfprom
           - qcom,msm8916-qfprom
           - qcom,msm8917-qfprom
+          - qcom,msm8937-qfprom
+          - qcom,msm8960-qfprom
           - qcom,msm8974-qfprom
           - qcom,msm8976-qfprom
           - qcom,msm8996-qfprom
@@ -51,6 +54,7 @@ properties:
           - qcom,sm8450-qfprom
           - qcom,sm8550-qfprom
           - qcom,sm8650-qfprom
+          - qcom,x1e80100-qfprom
       - const: qcom,qfprom
 
   reg:

Documentation/devicetree/bindings/nvmem/rockchip,otp.yaml

@@ -14,6 +14,7 @@ properties:
     enum:
       - rockchip,px30-otp
       - rockchip,rk3308-otp
+      - rockchip,rk3576-otp
       - rockchip,rk3588-otp
 
   reg:
@@ -62,12 +63,34 @@ allOf:
       properties:
         clocks:
           maxItems: 3
+        clock-names:
+          maxItems: 3
         resets:
           maxItems: 1
         reset-names:
           items:
             - const: phy
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - rockchip,rk3576-otp
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          maxItems: 3
+        resets:
+          minItems: 2
+          maxItems: 2
+        reset-names:
+          items:
+            - const: otp
+            - const: apb
+
   - if:
       properties:
         compatible:
@@ -78,6 +101,8 @@ allOf:
       properties:
         clocks:
           minItems: 4
+        clock-names:
+          minItems: 4
         resets:
           minItems: 3
         reset-names:

Documentation/translations/zh_CN/arch/openrisc/openrisc_port.rst

@@ -17,10 +17,10 @@ OpenRISC 1000系列（或1k）。
 
 关于OpenRISC处理器和正在进行中的开发的信息:
 
-	=======		=============================
+	=======		==============================
 	网站		https://openrisc.io
-	邮箱		openrisc@lists.librecores.org
-	=======		=============================
+	邮箱		linux-openrisc@vger.kernel.org
+	=======		==============================
 
 ---------------------------------------------------------------------
 
@@ -36,11 +36,11 @@ OpenRISC工具链和Linux的构建指南
 工具链的构建指南可以在openrisc.io或Stafford的工具链构建和发布脚本
 中找到。
 
-	======      =================================================
-	二进制      https://github.com/openrisc/or1k-gcc/releases
+	======      ==========================================================
+	二进制      https://github.com/stffrdhrn/or1k-toolchain-build/releases
 	工具链      https://openrisc.io/software
 	构建        https://github.com/stffrdhrn/or1k-toolchain-build
-	======      =================================================
+	======      ==========================================================
 
 2) 构建
 

Documentation/translations/zh_TW/arch/openrisc/openrisc_port.rst

@@ -17,10 +17,10 @@ OpenRISC 1000系列（或1k）。
 
 關於OpenRISC處理器和正在進行中的開發的信息:
 
-	=======		=============================
+	=======		==============================
 	網站		https://openrisc.io
-	郵箱		openrisc@lists.librecores.org
-	=======		=============================
+	郵箱		linux-openrisc@vger.kernel.org
+	=======		==============================
 
 ---------------------------------------------------------------------
 
@@ -36,11 +36,11 @@ OpenRISC工具鏈和Linux的構建指南
 工具鏈的構建指南可以在openrisc.io或Stafford的工具鏈構建和發佈腳本
 中找到。
 
-	======      =================================================
-	二進制      https://github.com/openrisc/or1k-gcc/releases
+	======      ==========================================================
+	二進制      https://github.com/stffrdhrn/or1k-toolchain-build/releases
 	工具鏈      https://openrisc.io/software
 	構建        https://github.com/stffrdhrn/or1k-toolchain-build
-	======      =================================================
+	======      ==========================================================
 
 2) 構建
 

MAINTAINERS

@@ -3191,6 +3191,12 @@ M:	Dinh Nguyen <[email protected]>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
+ARM/SOCFPGA DWMAC GLUE LAYER
+M:	Maxime Chevallier <[email protected]>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+
 ARM/SOCFPGA EDAC BINDINGS
 M:	Matthew Gerlach <[email protected]>
 S:	Maintained
@@ -3867,8 +3873,9 @@ AUXILIARY BUS DRIVER
 M:	Greg Kroah-Hartman <[email protected]>
 R:	Dave Ertman <[email protected]>
 R:	Ira Weiny <[email protected]>
+R:	Leon Romanovsky <[email protected]>
 S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core.git
 F:	Documentation/driver-api/auxiliary_bus.rst
 F:	drivers/base/auxiliary.c
 F:	include/linux/auxiliary_bus.h
@@ -7227,7 +7234,7 @@ M:	Greg Kroah-Hartman <[email protected]>
 M:	"Rafael J. Wysocki" <[email protected]>
 M:	Danilo Krummrich <[email protected]>
 S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core.git
 F:	Documentation/core-api/kobject.rst
 F:	drivers/base/
 F:	fs/debugfs/
@@ -10457,14 +10464,20 @@ S:	Supported
 F:	drivers/infiniband/hw/hfi1
 
 HFS FILESYSTEM
+M:	Viacheslav Dubeyko <[email protected]>
+M:	John Paul Adrian Glaubitz <[email protected]>
+M:	Yangtao Li <[email protected]>
 L:	[email protected]
-S:	Orphan
+S:	Maintained
 F:	Documentation/filesystems/hfs.rst
 F:	fs/hfs/
 
 HFSPLUS FILESYSTEM
+M:	Viacheslav Dubeyko <[email protected]>
+M:	John Paul Adrian Glaubitz <[email protected]>
+M:	Yangtao Li <[email protected]>
 L:	[email protected]
-S:	Orphan
+S:	Maintained
 F:	Documentation/filesystems/hfsplus.rst
 F:	fs/hfsplus/
 
@@ -13112,7 +13125,7 @@ KERNFS
 M:	Greg Kroah-Hartman <[email protected]>
 M:	Tejun Heo <[email protected]>
 S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core.git
 F:	fs/kernfs/
 F:	include/linux/kernfs.h
 
@@ -16812,6 +16825,7 @@ F:	Documentation/networking/net_cachelines/net_device.rst
 F:	drivers/connector/
 F:	drivers/net/
 F:	drivers/ptp/
+F:	drivers/s390/net/
 F:	include/dt-bindings/net/
 F:	include/linux/cn_proc.h
 F:	include/linux/etherdevice.h
@@ -16821,6 +16835,7 @@ F:	include/linux/fddidevice.h
 F:	include/linux/hippidevice.h
 F:	include/linux/if_*
 F:	include/linux/inetdevice.h
+F:	include/linux/ism.h
 F:	include/linux/netdev*
 F:	include/linux/platform_data/wiznet.h
 F:	include/uapi/linux/cn_proc.h
@@ -18689,7 +18704,7 @@ F:	drivers/pci/controller/pci-xgene-msi.c
 PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
 M:	Lorenzo Pieralisi <[email protected]>
 M:	Krzysztof Wilczyński <[email protected]>
-R:	Manivannan Sadhasivam <[email protected]>
+M:	Manivannan Sadhasivam <[email protected]>
 R:	Rob Herring <[email protected]>
 L:	[email protected]
 S:	Supported
@@ -18742,6 +18757,16 @@ F:	include/asm-generic/pci*
 F:	include/linux/of_pci.h
 F:	include/linux/pci*
 F:	include/uapi/linux/pci*
+
+PCI SUBSYSTEM [RUST]
+M:	Danilo Krummrich <[email protected]>
+R:	Bjorn Helgaas <[email protected]>
+R:	Krzysztof Wilczyński <[email protected]>
+L:	[email protected]
+S:	Maintained
+C:	irc://irc.oftc.net/linux-pci
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git
+F:	rust/helpers/pci.c
 F:	rust/kernel/pci.rs
 F:	samples/rust/rust_driver_pci.rs
 
@@ -21312,6 +21337,7 @@ L:	[email protected]
 L:	[email protected]
 S:	Supported
 F:	drivers/s390/net/
+F:	include/linux/ism.h
 
 S390 PCI SUBSYSTEM
 M:	Niklas Schnelle <[email protected]>
@@ -25184,9 +25210,13 @@ S:	Maintained
 F:	drivers/usb/typec/mux/pi3usb30532.c
 
 USB TYPEC PORT CONTROLLER DRIVERS
+M:	Badhri Jagan Sridharan <[email protected]>
 L:	[email protected]
-S:	Orphan
-F:	drivers/usb/typec/tcpm/
+S:	Maintained
+F:	drivers/usb/typec/tcpm/tcpci.c
+F:	drivers/usb/typec/tcpm/tcpm.c
+F:	include/linux/usb/tcpci.h
+F:	include/linux/usb/tcpm.h
 
 USB TYPEC TUSB1046 MUX DRIVER
 M:	Romain Gantois <[email protected]>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Baby Opossum Posse
 
 # *DOCUMENTATION*
@@ -1053,11 +1053,11 @@ NOSTDINC_FLAGS += -nostdinc
 KBUILD_CFLAGS += $(call cc-option, -fstrict-flex-arrays=3)
 
 #Currently, disable -Wstringop-overflow for GCC 11, globally.
-KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-option, -Wno-stringop-overflow)
+KBUILD_CFLAGS-$(CONFIG_CC_NO_STRINGOP_OVERFLOW) += $(call cc-disable-warning, stringop-overflow)
 KBUILD_CFLAGS-$(CONFIG_CC_STRINGOP_OVERFLOW) += $(call cc-option, -Wstringop-overflow)
 
-#Currently, disable -Wunterminated-string-initialization as an error
-KBUILD_CFLAGS += $(call cc-option, -Wno-error=unterminated-string-initialization)
+#Currently, disable -Wunterminated-string-initialization as broken
+KBUILD_CFLAGS += $(call cc-disable-warning, unterminated-string-initialization)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= -fno-strict-overflow