dt-bindings: mailbox: mpfs: fix reg properties

When the binding for this was originally written, and later modified,
mistakes were made - and the precise nature of the later modification
should have been a giveaway, but alas I was naive at the time.

A more correct modelling of the hardware is to use two syscons and have
a single reg entry for the mailbox, containing the mailbox region. The
two syscons contain the general control/status registers for the mailbox
and the interrupt related registers respectively. The reason for two
syscons is that the same mailbox is present on the non-SoC version of
the FPGA, which has no interrupt controller, and the shared part of the
rtl was unchanged between devices.

This is now coming to a head, because the control/status registers share
a register region with the "tvs" (temperature & voltage sensors)
registers and, as it turns out, people do want to monitor temperatures
and voltages...

Signed-off-by: Conor Dooley <[email protected]>
Acked-by: Rob Herring (Arm) <[email protected]>
Signed-off-by: Jassi Brar <[email protected]>

Author: ConchuOD

Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml

@@ -15,6 +15,8 @@ properties:
 
   reg:
     oneOf:
+      - items:
+          - description: mailbox data registers
       - items:
           - description: mailbox control & data registers
           - description: mailbox interrupt registers
@@ -23,6 +25,7 @@ properties:
           - description: mailbox control registers
           - description: mailbox interrupt registers
           - description: mailbox data registers
+        deprecated: true
 
   interrupts:
     maxItems: 1
@@ -41,12 +44,12 @@ additionalProperties: false
 examples:
   - |
     soc {
-      #address-cells = <2>;
-      #size-cells = <2>;
-      mbox: mailbox@37020000 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+
+      mailbox@37020800 {
         compatible = "microchip,mpfs-mailbox";
-        reg = <0x0 0x37020000 0x0 0x58>, <0x0 0x2000318C 0x0 0x40>,
-              <0x0 0x37020800 0x0 0x100>;
+        reg = <0x37020800 0x100>;
         interrupt-parent = <&L1>;
         interrupts = <96>;
         #mbox-cells = <1>;