spi: stm32: Don't warn about spurious interrupts

The dev_warn to notify about a spurious interrupt was introduced with
the reasoning that these are unexpected. However spurious interrupts
tend to trigger continously and the error message on the serial console
prevents that the core's detection of spurious interrupts kicks in
(which disables the irq) and just floods the console.

Fixes: c64e7ef ("spi: stm32: make spurious and overrun interrupts visible")
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://msgid.link/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

Author: Uwe Kleine-König

drivers/spi/spi-stm32.c

@@ -1057,7 +1057,7 @@ static irqreturn_t stm32h7_spi_irq_thread(int irq, void *dev_id)
 		mask |= STM32H7_SPI_SR_TXP | STM32H7_SPI_SR_RXP;
 
 	if (!(sr & mask)) {
-		dev_warn(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n",
+		dev_vdbg(spi->dev, "spurious IT (sr=0x%08x, ier=0x%08x)\n",
 			 sr, ier);
 		spin_unlock_irqrestore(&spi->lock, flags);
 		return IRQ_NONE;