Merge 6.14-rc6 into driver-core-next

We need the driver core fix in here as well.

Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: gregkh

.mailmap

@@ -88,7 +88,6 @@ Antonio Quartulli <[email protected]> <[email protected]>
 Antonio Quartulli <[email protected]> <[email protected]>
 Antonio Quartulli <[email protected]> <[email protected]>
 Antonio Quartulli <[email protected]> <[email protected]>
-Antonio Quartulli <[email protected]> <[email protected]>
 Antonio Quartulli <[email protected]> <[email protected]>
 Anup Patel <[email protected]> <[email protected]>
 Archit Taneja <[email protected]>
@@ -226,6 +225,7 @@ Fangrui Song <[email protected]> <[email protected]>
 Felipe W Damasio <[email protected]>
 Felix Kuhling <[email protected]>
 Felix Moeller <[email protected]>
+Feng Tang <[email protected]> <[email protected]>
 Fenglin Wu <[email protected]> <[email protected]>
 Filipe Lautert <[email protected]>
 Finn Thain <[email protected]> <[email protected]>
@@ -317,6 +317,8 @@ Jayachandran C <[email protected]> <[email protected]>
 Jean Tourrilhes <[email protected]>
 Jeevan Shriram <[email protected]> <[email protected]>
 Jeff Garzik <[email protected]>
+Jeff Johnson <[email protected]> <[email protected]>
+Jeff Johnson <[email protected]> <[email protected]>
 Jeff Layton <[email protected]> <[email protected]>
 Jeff Layton <[email protected]> <[email protected]>
 Jeff Layton <[email protected]> <[email protected]>
@@ -519,6 +521,7 @@ Nadav Amit <[email protected]> <[email protected]>
 Nadia Yvette Chambers <[email protected]> William Lee Irwin III <[email protected]>
 Naoya Horiguchi <[email protected]> <[email protected]>
 Naoya Horiguchi <[email protected]> <[email protected]>
+Natalie Vock <[email protected]> <[email protected]>
 Nathan Chancellor <[email protected]> <[email protected]>
 Naveen N Rao <[email protected]> <[email protected]>
 Naveen N Rao <[email protected]> <[email protected]>
@@ -531,6 +534,7 @@ Nicholas Piggin <[email protected]> <[email protected]>
 Nicholas Piggin <[email protected]> <[email protected]>
 Nicholas Piggin <[email protected]> <[email protected]>
 Nicholas Piggin <[email protected]> <[email protected]>
+Nick Desaulniers <[email protected]> <[email protected]>
 Nicolas Ferre <[email protected]> <[email protected]>
 Nicolas Pitre <[email protected]> <[email protected]>
 Nicolas Pitre <[email protected]> <[email protected]>
@@ -609,6 +613,8 @@ Richard Leitner <[email protected]> <[email protected]>
 Richard Leitner <[email protected]> <[email protected]>
 Robert Foss <[email protected]> <[email protected]>
 Rocky Liao <[email protected]> <[email protected]>
+Rodrigo Siqueira <[email protected]> <[email protected]>
+Rodrigo Siqueira <[email protected]> <[email protected]>
 Roman Gushchin <[email protected]> <[email protected]>
 Roman Gushchin <[email protected]> <[email protected]>
 Roman Gushchin <[email protected]> <[email protected]>
@@ -685,6 +691,7 @@ Subbaraman Narayanamurthy <[email protected]> <[email protected]>
 Subhash Jadavani <[email protected]>
 Sudarshan Rajagopalan <[email protected]> <[email protected]>
 Sudeep Holla <[email protected]> Sudeep KarkadaNagesha <[email protected]>
+Sumit Garg <[email protected]> <[email protected]>
 Sumit Semwal <[email protected]>
 Surabhi Vishnoi <[email protected]> <[email protected]>
 Sven Eckelmann <[email protected]> <[email protected]>

Documentation/admin-guide/README.rst

@@ -176,7 +176,7 @@ Configuring the kernel
                         values without prompting.
 
      "make defconfig"   Create a ./.config file by using the default
-                        symbol values from either arch/$ARCH/defconfig
+                        symbol values from either arch/$ARCH/configs/defconfig
                         or arch/$ARCH/configs/${PLATFORM}_defconfig,
                         depending on the architecture.
 

Documentation/admin-guide/sysctl/kernel.rst

@@ -212,6 +212,17 @@ pid>/``).
 This value defaults to 0.
 
 
+core_sort_vma
+=============
+
+The default coredump writes VMAs in address order. By setting
+``core_sort_vma`` to 1, VMAs will be written from smallest size
+to largest size. This is known to break at least elfutils, but
+can be handy when dealing with very large (and truncated)
+coredumps where the more useful debugging details are included
+in the smaller VMAs.
+
+
 core_uses_pid
 =============
 

Documentation/arch/powerpc/cxl.rst

@@ -18,6 +18,7 @@ Introduction
     both access system memory directly and with the same effective
     addresses.
 
+    **This driver is deprecated and will be removed in a future release.**
 
 Hardware overview
 =================
@@ -453,7 +454,7 @@ Sysfs Class
 
     A cxl sysfs class is added under /sys/class/cxl to facilitate
     enumeration and tuning of the accelerators. Its layout is
-    described in Documentation/ABI/testing/sysfs-class-cxl
+    described in Documentation/ABI/obsolete/sysfs-class-cxl
 
 
 Udev rules

Documentation/arch/x86/sva.rst

@@ -25,7 +25,7 @@ to cache translations for virtual addresses. The IOMMU driver uses the
 mmu_notifier() support to keep the device TLB cache and the CPU cache in
 sync. When an ATS lookup fails for a virtual address, the device should
 use the PRI in order to request the virtual address to be paged into the
-CPU page tables. The device must use ATS again in order the fetch the
+CPU page tables. The device must use ATS again in order to fetch the
 translation before use.
 
 Shared Hardware Workqueues
@@ -216,7 +216,7 @@ submitting work and processing completions.
 
 Single Root I/O Virtualization (SR-IOV) focuses on providing independent
 hardware interfaces for virtualizing hardware. Hence, it's required to be
-almost fully functional interface to software supporting the traditional
+an almost fully functional interface to software supporting the traditional
 BARs, space for interrupts via MSI-X, its own register layout.
 Virtual Functions (VFs) are assisted by the Physical Function (PF)
 driver.

Documentation/devicetree/bindings/arm/rockchip/pmu.yaml

@@ -53,11 +53,17 @@ properties:
   reg:
     maxItems: 1
 
+  power-controller:
+    type: object
+
+  reboot-mode:
+    type: object
+
 required:
   - compatible
   - reg
 
-additionalProperties: true
+additionalProperties: false
 
 examples:
   - |

Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml

@@ -146,6 +146,7 @@ properties:
     maxItems: 2
 
   pwm-names:
+    minItems: 1
     items:
       - const: convst1
       - const: convst2

Documentation/devicetree/bindings/mtd/cdns,hp-nfc.yaml

@@ -33,6 +33,10 @@ properties:
   clocks:
     maxItems: 1
 
+  clock-names:
+    items:
+      - const: nf_clk
+
   dmas:
     maxItems: 1
 
@@ -51,6 +55,7 @@ required:
   - reg-names
   - interrupts
   - clocks
+  - clock-names
 
 unevaluatedProperties: false
 
@@ -66,7 +71,8 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
-        clocks = <&nf_clk>;
+        clocks = <&clk>;
+        clock-names = "nf_clk";
         cdns,board-delay-ps = <4830>;
 
         nand@0 {

Documentation/filesystems/idmappings.rst

@@ -63,8 +63,8 @@ what id ``k11000`` corresponds to in the second or third idmapping. The
 straightforward algorithm to use is to apply the inverse of the first idmapping,
 mapping ``k11000`` up to ``u1000``. Afterwards, we can map ``u1000`` down using
 either the second idmapping mapping or third idmapping mapping. The second
-idmapping would map ``u1000`` down to ``21000``. The third idmapping would map
-``u1000`` down to ``u31000``.
+idmapping would map ``u1000`` down to ``k21000``. The third idmapping would map
+``u1000`` down to ``k31000``.
 
 If we were given the same task for the following three idmappings::
 

Documentation/networking/strparser.rst

@@ -112,7 +112,7 @@ Functions
 Callbacks
 =========
 
-There are six callbacks:
+There are seven callbacks:
 
     ::
 
@@ -182,6 +182,13 @@ There are six callbacks:
     the length of the message. skb->len - offset may be greater
     then full_len since strparser does not trim the skb.
 
+    ::
+
+	int (*read_sock)(struct strparser *strp, read_descriptor_t *desc,
+                     sk_read_actor_t recv_actor);
+
+    The read_sock callback is used by strparser instead of
+    sock->ops->read_sock, if provided.
     ::
 
 	int (*read_sock_done)(struct strparser *strp, int err);