net: hibmcge: fix incorrect multicast filtering issue

The driver does not support multicast filtering,
the mask must be set to 0xFFFFFFFF. Otherwise,
incorrect filtering occurs.

This patch fixes this problem.

Fixes: 37b367d ("net: hibmcge: Add unicast frame filter supported in this module")
Signed-off-by: Jijie Shao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Author: Jijie Shao

drivers/net/ethernet/hisilicon/hibmcge/hbg_hw.c

@@ -234,6 +234,10 @@ void hbg_hw_set_mac_filter_enable(struct hbg_priv *priv, u32 enable)
 {
 	hbg_reg_write_field(priv, HBG_REG_REC_FILT_CTRL_ADDR,
 			    HBG_REG_REC_FILT_CTRL_UC_MATCH_EN_B, enable);
+
+	/* only uc filter is supported, so set all bits of mc mask reg to 1 */
+	hbg_reg_write64(priv, HBG_REG_STATION_ADDR_LOW_MSK_0, U64_MAX);
+	hbg_reg_write64(priv, HBG_REG_STATION_ADDR_LOW_MSK_1, U64_MAX);
 }
 
 void hbg_hw_set_pause_enable(struct hbg_priv *priv, u32 tx_en, u32 rx_en)

drivers/net/ethernet/hisilicon/hibmcge/hbg_reg.h

@@ -135,6 +135,8 @@
 #define HBG_REG_STATION_ADDR_HIGH_4_ADDR	(HBG_REG_SGMII_BASE + 0x0224)
 #define HBG_REG_STATION_ADDR_LOW_5_ADDR		(HBG_REG_SGMII_BASE + 0x0228)
 #define HBG_REG_STATION_ADDR_HIGH_5_ADDR	(HBG_REG_SGMII_BASE + 0x022C)
+#define HBG_REG_STATION_ADDR_LOW_MSK_0		(HBG_REG_SGMII_BASE + 0x0230)
+#define HBG_REG_STATION_ADDR_LOW_MSK_1		(HBG_REG_SGMII_BASE + 0x0238)
 
 /* PCU */
 #define HBG_REG_TX_FIFO_THRSLD_ADDR		(HBG_REG_SGMII_BASE + 0x0420)