serial: 8250: Do not set UART_LSR_THRE in @read_status_mask

Since Linux 2.1.8 @read_status_mask is no longer used as a
general control of which bits are used from the LSR register.
Instead it has become an additional mask applied to
@ignore_status_mask. Since UART_LSR_THRE is never set for
@ignore_status_mask, it serves no purpose to set it for
@read_status_mask. In fact, it propagates the misconception
that @read_status_mask can be used as a general mask for LSR
bits.

Do not set UART_LSR_THRE for @read_status_mask.

Signed-off-by: John Ogness <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: jogness

drivers/tty/serial/8250/8250_omap.c

@@ -412,7 +412,7 @@ static void omap_8250_set_termios(struct uart_port *port,
 	 */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+	up->port.read_status_mask = UART_LSR_OE | UART_LSR_DR;
 	if (termios->c_iflag & INPCK)
 		up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
 	if (termios->c_iflag & (IGNBRK | PARMRK))

drivers/tty/serial/8250/8250_port.c

@@ -2786,7 +2786,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 	 */
 	uart_update_timeout(port, termios->c_cflag, baud);
 
-	port->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+	port->read_status_mask = UART_LSR_OE | UART_LSR_DR;
 	if (termios->c_iflag & INPCK)
 		port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
 	if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))