net: mdio: mdio-bcm-unimac: Correct rate fallback logic

When the parent clock is a gated clock which has multiple parents, the
clock provider (clk-scmi typically) might return a rate of 0 since there
is not one of those particular parent clocks that should be chosen for
returning a rate. Prior to ee97535 ("net: mdio: mdio-bcm-unimac:
Manage clock around I/O accesses"), we would not always be passing a
clock reference depending upon how mdio-bcm-unimac was instantiated. In
that case, we would take the fallback path where the rate is hard coded
to 250MHz.

Make sure that we still fallback to using a fixed rate for the divider
calculation, otherwise we simply ignore the desired MDIO bus clock
frequency which can prevent us from interfacing with Ethernet PHYs
properly.

Fixes: ee97535 ("net: mdio: mdio-bcm-unimac: Manage clock around I/O accesses")
Signed-off-by: Florian Fainelli <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>

Author: ffainelli

drivers/net/mdio/mdio-bcm-unimac.c

@@ -209,10 +209,9 @@ static int unimac_mdio_clk_set(struct unimac_mdio_priv *priv)
 	if (ret)
 		return ret;
 
-	if (!priv->clk)
+	rate = clk_get_rate(priv->clk);
+	if (!rate)
 		rate = 250000000;
-	else
-		rate = clk_get_rate(priv->clk);
 
 	div = (rate / (2 * priv->clk_freq)) - 1;
 	if (div & ~MDIO_CLK_DIV_MASK) {