Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystem changes
  for 6.11-rc1. Nothing major in here, just loads of new drivers and
  updates. Included in here are:

   - IIO api updates and new drivers added

   - wait_interruptable_timeout() api cleanups for some drivers

   - MODULE_DESCRIPTION() additions for loads of drivers

   - parport out-of-bounds fix

   - interconnect driver updates and additions

   - mhi driver updates and additions

   - w1 driver fixes

   - binder speedups and fixes

   - eeprom driver updates

   - coresight driver updates

   - counter driver update

   - new misc driver additions

   - other minor api updates

  All of these, EXCEPT for the final Kconfig build fix for 32bit
  systems, have been in linux-next for a while with no reported issues.
  The Kconfig fixup went in 29 hours ago, so might have missed the
  latest linux-next, but was acked by everyone involved"

* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
  misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
  misc: delete Makefile.rej
  binder: fix hang of unregistered readers
  misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
  virtio: add missing MODULE_DESCRIPTION() macro
  agp: uninorth: add missing MODULE_DESCRIPTION() macro
  spmi: add missing MODULE_DESCRIPTION() macros
  dev/parport: fix the array out-of-bounds risk
  samples: configfs: add missing MODULE_DESCRIPTION() macro
  misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
  misc: keba: Fix missing AUXILIARY_BUS dependency
  slimbus: Fix struct and documentation alignment in stream.c
  MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
  misc: fastrpc: use coherent pool for untranslated Compute Banks
  misc: fastrpc: support complete DMA pool access to the DSP
  misc: fastrpc: add missing MODULE_DESCRIPTION() macro
  misc: fastrpc: Add missing dev_err newlines
  misc: fastrpc: Use memdup_user()
  nvmem: core: Implement force_ro sysfs attribute
  nvmem: Use sysfs_emit() for type attribute
  ...

Author: torvalds

Documentation/ABI/stable/sysfs-bus-nvmem

@@ -1,6 +1,23 @@
+What:		/sys/bus/nvmem/devices/.../force_ro
+Date:		June 2024
+KernelVersion:	6.11
+Contact:	Marek Vasut <[email protected]>
+Description:
+		This read/write attribute allows users to set read-write
+		devices as read-only and back to read-write from userspace.
+		This can be used to unlock and relock write-protection of
+		devices which are generally locked, except during sporadic
+		programming operation.
+		Read returns '0' or '1' for read-write or read-only modes
+		respectively.
+		Write parses one of 'YyTt1NnFf0', or [oO][NnFf] for "on"
+		and "off", i.e. what kstrbool() supports.
+		Note: This file is only present if CONFIG_NVMEM_SYSFS
+		is enabled.
+
 What:		/sys/bus/nvmem/devices/.../nvmem
 Date:		July 2015
-KernelVersion:  4.2
+KernelVersion:	4.2
 Contact:	Srinivas Kandagatla <[email protected]>
 Description:
 		This file allows user to read/write the raw NVMEM contents.
@@ -20,3 +37,14 @@ Description:
 		  ...
 		  *
 		  0001000
+
+What:		/sys/bus/nvmem/devices/.../type
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Alexandre Belloni <[email protected]>
+Description:
+		This read-only attribute allows user to read the NVMEM
+		device type. Supported types are "Unknown", "EEPROM",
+		"OTP", "Battery backed", "FRAM".
+		Note: This file is only present if CONFIG_NVMEM_SYSFS
+		is enabled.

Documentation/ABI/stable/sysfs-driver-misc-cp500

@@ -0,0 +1,25 @@
+What:		/sys/devices/pciXXXX:XX/0000:XX:XX.X/0000:XX:XX.X/version
+Date:		June 2024
+KernelVersion:	6.11
+Contact:	Gerhard Engleder <[email protected]>
+Description:	Version of the FPGA configuration bitstream as printable string.
+		This file is read only.
+Users:		KEBA
+
+What:		/sys/devices/pciXXXX:XX/0000:XX:XX.X/0000:XX:XX.X/keep_cfg
+Date:		June 2024
+KernelVersion:	6.11
+Contact:	Gerhard Engleder <[email protected]>
+Description:	Flag which signals if FPGA shall keep or reload configuration
+		bitstream on reset. Normal FPGA behavior and default is to keep
+		configuration bitstream and to only reset the configured logic.
+
+		Reloading configuration on reset enables an update of the
+		configuration bitstream with a simple reboot. Otherwise it is
+		necessary to power cycle the device to reload the new
+		configuration bitstream.
+
+		This file is read/write. The values are as follows:
+		1 = keep configuration bitstream on reset, default
+		0 = reload configuration bitstream on reset
+Users:		KEBA

Documentation/ABI/testing/sysfs-bus-iio-inv_icm42600

@@ -0,0 +1,18 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_power_mode
+KernelVersion:	6.11
+Contact:	[email protected]
+Description:
+		Accelerometer power mode. Setting this attribute will set the
+		requested power mode to use if the ODR support it. If ODR
+		support only 1 mode, power mode will be enforced.
+		Reading this attribute will return the current accelerometer
+		power mode if the sensor is on, or the requested value if the
+		sensor is off. The value between real and requested value can
+		be different for ODR supporting only 1 mode.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_accel_power_mode_available
+KernelVersion:	6.11
+Contact:	[email protected]
+Description:
+		List of available accelerometer power modes that can be set in
+		in_accel_power_mode attribute.

Documentation/devicetree/bindings/counter/ti-eqep.yaml

@@ -11,7 +11,9 @@ maintainers:
 
 properties:
   compatible:
-    const: ti,am3352-eqep
+    enum:
+      - ti,am3352-eqep
+      - ti,am62-eqep
 
   reg:
     maxItems: 1
@@ -21,19 +23,35 @@ properties:
     maxItems: 1
 
   clocks:
-    description: The clock that determines the SYSCLKOUT rate for the eQEP
-      peripheral.
+    description: The functional and interface clock that determines the clock
+      rate for the eQEP peripheral.
     maxItems: 1
 
   clock-names:
     const: sysclkout
 
+  power-domains:
+    maxItems: 1
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,am62-eqep
+    then:
+      properties:
+        clock-names: false
+
+      required:
+        - power-domains
+
 required:
   - compatible
   - reg
   - interrupts
   - clocks
-  - clock-names
 
 additionalProperties: false
 
@@ -43,7 +61,6 @@ examples:
         compatible = "ti,am3352-eqep";
         reg = <0x180 0x80>;
         clocks = <&l4ls_gclk>;
-        clock-names = "sysclkout";
         interrupts = <79>;
     };
 

Documentation/devicetree/bindings/iio/adc/adc.yaml

@@ -38,6 +38,25 @@ properties:
       The first value specifies the positive input pin, the second
       specifies the negative input pin.
 
+  single-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      When devices combine single-ended and differential channels, allow the
+      channel for a single element to be specified, independent of reg (as for
+      differential channels). If this and diff-channels are not present reg
+      shall be used instead.
+
+  common-mode-channel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Some ADCs have differential input pins that can be used to measure
+      single-ended or pseudo-differential inputs. This property can be used
+      in addition to single-channel to signal software that this channel is
+      not differential but still specify two inputs.
+
+      The input pair is specified by setting single-channel to the positive
+      input pin and common-mode-channel to the negative pin.
+
   settling-time-us:
     description:
       Time between enabling the channel and first stable readings.
@@ -50,4 +69,15 @@ properties:
       device design and can interact with other characteristics such as
       settling time.
 
+anyOf:
+  - oneOf:
+      - required:
+          - reg
+          - diff-channels
+      - required:
+          - reg
+          - single-channel
+  - required:
+      - reg
+
 additionalProperties: true